April 21st, 2011, 10:19 PM | #41 |
ninjette.org certified postwhore
Name: Wayan
Location: Bali - Indonesia
Join Date: Apr 2009 Motorcycle(s): 2014 Z250 Posts: A lot.
|
http://www.ninjette.org/forums/showp...&postcount=465
posted there already, can have a look there rather than having to repeat myself again.
__________________________________________________
Kawasaki Z250, Bored up to 300cc with 12.8 CR, 41hp at wheel 27nm torque, Two bros full exhaust with DB killer Dynojet Power Commander V, KnN Open filter, intake and exhaust ported, Puig Windshield |
|
April 22nd, 2011, 09:36 AM | #42 | |
CPT Falcon
Name: J.Emmett Turner
Location: Newnan, GA
Join Date: Apr 2009 Motorcycle(s): '08 CP Blue EX250J, '97 unpainted EX250F, 2nd '97 unpainted EX250F (no engine), '07 black EX250F Posts: A lot.
|
Quote:
|
|
|
April 22nd, 2011, 10:23 AM | #43 |
ninjette.org certified postwhore
Name: Wayan
Location: Bali - Indonesia
Join Date: Apr 2009 Motorcycle(s): 2014 Z250 Posts: A lot.
|
go go invite them
i dont have accounts on those forums so i cant post there to tell ppl to come here :P
__________________________________________________
Kawasaki Z250, Bored up to 300cc with 12.8 CR, 41hp at wheel 27nm torque, Two bros full exhaust with DB killer Dynojet Power Commander V, KnN Open filter, intake and exhaust ported, Puig Windshield |
|
April 22nd, 2011, 10:57 AM | #44 |
CPT Falcon
Name: J.Emmett Turner
Location: Newnan, GA
Join Date: Apr 2009 Motorcycle(s): '08 CP Blue EX250J, '97 unpainted EX250F, 2nd '97 unpainted EX250F (no engine), '07 black EX250F Posts: A lot.
|
|
|
April 22nd, 2011, 11:49 AM | #45 |
ninjette.org certified postwhore
Name: Sean
Location: Mary Esther, FL
Join Date: Jan 2009 Motorcycle(s): 2008 Ninja 250 1998 HD Road King Posts: A lot.
|
|
|
April 22nd, 2011, 12:41 PM | #46 |
ModMy250.com
Name: Tri
Location: St, Louis
Join Date: Sep 2010 Motorcycle(s): 2009 Ninja 250R, 2005 R6 Posts: A lot.
|
Any chance the clips on can come in blue?
__________________________________________________
The www.ModMy250.com guy |
|
April 23rd, 2011, 07:32 AM | #47 |
ninjette.org member
Name: Eric
Location: California, SF
Join Date: Apr 2011 Motorcycle(s): 2011 Ninja 250r SE Posts: 27
|
Wayan, I am still interested in the rx2 gauge set. Please get a shipping quote for me and get me a set. So you cant get the gear shift indicator? By the way, I need a US carberated pnp version. Thanks!!!
|
|
April 23rd, 2011, 09:28 AM | #48 | |
ninjette.org member
Name: Bruce
Location: Hudson, FL
Join Date: Apr 2011 Motorcycle(s): 2010 Ninja 250 Posts: 38
|
Quote:
+1 on the US carberated pnp version. |
|
|
April 23rd, 2011, 09:58 PM | #49 |
Kawic
Name: kawa
Location: indianapolis
Join Date: Apr 2011 Motorcycle(s): ninja 250 08 Posts: 33
|
How much is the air scoop covers and how do I order it from the States. (please including shipping fee)
|
|
April 23rd, 2011, 11:26 PM | #50 |
ninjette.org certified postwhore
Name: Wayan
Location: Bali - Indonesia
Join Date: Apr 2009 Motorcycle(s): 2014 Z250 Posts: A lot.
|
@ Bruce, next week once i get work sorted out (need to catch up after staying home for a week) ill look into the shipping. ill get an estimate shipping price by using my Koso cluster which popped out during my accident to get an idea of the cost.
we have the carburetor models here too (NOT EFI) so we have the same type of bikes. whats nice with this plug & play kit is that you only need to pull one wire from the battery, and the rest is all just P&P. since my bike is so conveniently sitting there naked and broken ive taken pictures to show the wiring~ @kawac, ill look into the shipping cost to indianapolis~ whats the post code? it would help me get a more precise shipping cost
__________________________________________________
Kawasaki Z250, Bored up to 300cc with 12.8 CR, 41hp at wheel 27nm torque, Two bros full exhaust with DB killer Dynojet Power Commander V, KnN Open filter, intake and exhaust ported, Puig Windshield |
|
April 23rd, 2011, 11:59 PM | #51 |
ninjette.org certified postwhore
Name: Wayan
Location: Bali - Indonesia
Join Date: Apr 2009 Motorcycle(s): 2014 Z250 Posts: A lot.
|
so here is the temporary (ever changing) list:
1: sarapacman99 - White Air scoop - Las Vegas 2: Lvr - Black Air scoop - NY? 3: bob706 - Black Air scoop - Florida? 4: blade - Green Air scoop - NY? 5: kawac - Black Air Scoop - Indianapolis 6: nsainfreek - P&P Koso Cluster - Hawaii 7: AzEKnightz - P&P Koso Cluster - California 8: ShelbyOne - FiberG. Koso Bezel - Alaska (shipping out this coming week) 9: im not sure anymore if ive missed someone, since there has been several request through PM's as well, and have lost track a little. @ Tri. which clip ons, the TKC ones? id have to ask~ I've seen black and silver i think... not sure about other colors W.
__________________________________________________
Kawasaki Z250, Bored up to 300cc with 12.8 CR, 41hp at wheel 27nm torque, Two bros full exhaust with DB killer Dynojet Power Commander V, KnN Open filter, intake and exhaust ported, Puig Windshield |
|
April 24th, 2011, 12:19 AM | #52 |
Kawic
Name: kawa
Location: indianapolis
Join Date: Apr 2011 Motorcycle(s): ninja 250 08 Posts: 33
|
If possible, please send the pricce for P&P Koso Cluster
|
|
April 24th, 2011, 12:42 AM | #53 |
ninjette.org certified postwhore
Name: Wayan
Location: Bali - Indonesia
Join Date: Apr 2009 Motorcycle(s): 2014 Z250 Posts: A lot.
|
the shop price for the Koso P&P kit, with custom bracket, volt meter, sensors, etc. is $350 (3.000.000 IDR Indonesian Rupees) due to the fluctuating exchange im just giving a rounded number. when and if someone wants to buy one, ill be double checking the exchange rate, and also ask for a little extra to cover the money lost due to the lower exchange that i get through paypal & the credit card.
W~
__________________________________________________
Kawasaki Z250, Bored up to 300cc with 12.8 CR, 41hp at wheel 27nm torque, Two bros full exhaust with DB killer Dynojet Power Commander V, KnN Open filter, intake and exhaust ported, Puig Windshield |
|
April 24th, 2011, 07:47 AM | #54 |
self wrencher
Name: john
Location: houston
Join Date: Dec 2008 Motorcycle(s): 08 250r and 07 600r Posts: A lot.
|
Wow. Koso kit so cheap. I paid 475 plus have to buy the bezel separately cuz Shiito Paul Kirk scammed me.
|
|
April 24th, 2011, 10:36 AM | #55 |
ninjette.org certified postwhore
Name: Wayan
Location: Bali - Indonesia
Join Date: Apr 2009 Motorcycle(s): 2014 Z250 Posts: A lot.
|
ouff that blows...
__________________________________________________
Kawasaki Z250, Bored up to 300cc with 12.8 CR, 41hp at wheel 27nm torque, Two bros full exhaust with DB killer Dynojet Power Commander V, KnN Open filter, intake and exhaust ported, Puig Windshield |
|
April 24th, 2011, 06:53 PM | #56 |
ninjette.org newbie
Name: Shigs
Location: Florida
Join Date: Apr 2011 Motorcycle(s): 08 Ninja 250 Posts: 5
|
Count me in on a black air scoop, let me know when!!
|
|
April 24th, 2011, 07:18 PM | #57 |
ninjette.org certified postwhore
Name: Wayan
Location: Bali - Indonesia
Join Date: Apr 2009 Motorcycle(s): 2014 Z250 Posts: A lot.
|
updating~
the ever changing list: 1: sarapacman99 - White Air scoop - Las Vegas 2: Lvr - Black Air scoop - NY? 3: bob706 - Black Air scoop - Florida? 4: blade - Green Air scoop - NY? 5: kawac - Black Air Scoop - Indianapolis 6: nsainfreek - P&P Koso Cluster - Hawaii 7: AzEKnightz - P&P Koso Cluster - California 8: ShelbyOne - FiberG. Koso Bezel - Alaska (shipping out this week) 9: shigs - Black Air Scoop - Florida 10: im back at work again today. once i get on top of everything here ill start putting a little time aside to find out possible shipping prices. i might have an alternative solution to help out, but that's still a maybe~ my girlfriend is heading over to Vegas mid of next month, and i might be able to get her to bring parts over that we can fit in her suitcase. then it would only need to be shipped nationally over there, nice and cheap. the limiting factor will be the space available in her suitcase. if i do that, ive already asked Charlie (sarapacman99) if he can be responsible for the redistribution of the stuff over there, since my girl wont have time to do it while shes there, and he's agreed to help out. what ill do is prioritize the items of the people that requested first (as per the list). whatever she cant carry in the suitcase will have be be shipped from here, as per the original plan. cheers, W.
__________________________________________________
Kawasaki Z250, Bored up to 300cc with 12.8 CR, 41hp at wheel 27nm torque, Two bros full exhaust with DB killer Dynojet Power Commander V, KnN Open filter, intake and exhaust ported, Puig Windshield |
|
April 25th, 2011, 02:54 AM | #58 |
ninjette.org certified postwhore
Name: Wayan
Location: Bali - Indonesia
Join Date: Apr 2009 Motorcycle(s): 2014 Z250 Posts: A lot.
|
that's the flush mount still in the package. selling price is 200.000 Rp (roughly $23.50) on a bike it looks like this: same pic as on page 1, but saves you flicking back a page,
__________________________________________________
Kawasaki Z250, Bored up to 300cc with 12.8 CR, 41hp at wheel 27nm torque, Two bros full exhaust with DB killer Dynojet Power Commander V, KnN Open filter, intake and exhaust ported, Puig Windshield |
|
April 25th, 2011, 04:04 AM | #59 |
ninjette.org member
Name: dennis
Location: Hawaii
Join Date: Apr 2011 Motorcycle(s): 2010 250 Posts: 11
|
I'm guessing those aren't DOT approved and can't pass safety check.
|
|
April 25th, 2011, 06:36 AM | #60 |
ninjette.org certified postwhore
Name: Wayan
Location: Bali - Indonesia
Join Date: Apr 2009 Motorcycle(s): 2014 Z250 Posts: A lot.
|
uh.... i could get a DOT sticker printed and whack it on next to the bar code
haha... well nope, i wouldn't know if its DOT approved. i do pay attention to that sticker when i get my helmets though here is some progress on my bike, took almost everything off now. shes filthy... gonna give the bike a good wash one of these days. will post pictures as i get some progress on her bit by bit. now that my hands are almost all healed up its time to play doctor with the bike
__________________________________________________
Kawasaki Z250, Bored up to 300cc with 12.8 CR, 41hp at wheel 27nm torque, Two bros full exhaust with DB killer Dynojet Power Commander V, KnN Open filter, intake and exhaust ported, Puig Windshield |
|
April 25th, 2011, 08:09 AM | #61 |
ModMy250.com
Name: Tri
Location: St, Louis
Join Date: Sep 2010 Motorcycle(s): 2009 Ninja 250R, 2005 R6 Posts: A lot.
|
No problem Wayan. I was just interested in any of the clip ons that might come in blue, but no need to go out of your way to find them. Thanks for providing us with this service and I'm glad you didn't suffer major injuries during your down.
__________________________________________________
The www.ModMy250.com guy |
|
April 25th, 2011, 09:45 AM | #62 |
ninjette.org certified postwhore
Name: Wayan
Location: Bali - Indonesia
Join Date: Apr 2009 Motorcycle(s): 2014 Z250 Posts: A lot.
|
ah, i asked about blue clipons, sadly they don't have any. they only have silver and black, and at the moment only black is in stock.
although if you really really really want them in blue i could get them powder coated for you although it wont be easy to get the right BLUE color hehe and it would cost some $$
__________________________________________________
Kawasaki Z250, Bored up to 300cc with 12.8 CR, 41hp at wheel 27nm torque, Two bros full exhaust with DB killer Dynojet Power Commander V, KnN Open filter, intake and exhaust ported, Puig Windshield |
|
April 25th, 2011, 10:22 AM | #63 |
ModMy250.com
Name: Tri
Location: St, Louis
Join Date: Sep 2010 Motorcycle(s): 2009 Ninja 250R, 2005 R6 Posts: A lot.
|
No worries bro. I don't think powdercoating them would be a good idea since it adds to the thickness and would probably make it really difficult to put handles on them. I used to do powder coating myself. I'm sure it's why they anodize the bars instead of powder coating them.
__________________________________________________
The www.ModMy250.com guy |
|
April 25th, 2011, 07:41 PM | #64 |
ninjette.org certified postwhore
Name: Wayan
Location: Bali - Indonesia
Join Date: Apr 2009 Motorcycle(s): 2014 Z250 Posts: A lot.
|
true that about the PC being thick and possibly causing issues with the various parts to fit. well you currently have an option of black or black, hehehe
im buying me a set of black KTC clipons. went through the hassle of removing the end bar weights on the stock handlebars yesterday, they are tough little critters to get out! anyhow another addition to the list~ 1: sarapacman99 - White Air scoop - Las Vegas 2: Lvr - Black Air scoop - NY? 3: bob706 - Black Air scoop - Florida? 4: blade - Green Air scoop - NY? 5: kawac - Black Air Scoop - Indianapolis 6: nsainfreek - P&P Koso Cluster - Hawaii 7: AzEKnightz - P&P Koso Cluster - California 8: ShelbyOne - FiberG. Koso Bezel - Alaska (shipping out this week) 9: shigs - Black Air Scoop - Florida 10: chowbray - P&P Koso Cluster - Canada 11:
__________________________________________________
Kawasaki Z250, Bored up to 300cc with 12.8 CR, 41hp at wheel 27nm torque, Two bros full exhaust with DB killer Dynojet Power Commander V, KnN Open filter, intake and exhaust ported, Puig Windshield |
|
April 25th, 2011, 08:31 PM | #65 |
Climb to Glory!
Name: Charlie
Location: Las Vegas
Join Date: Mar 2011 Motorcycle(s): 2011 Kawasaki Ninja 250R White (sold) Posts: 234
|
i'm a total newbie, ming if i asked what makes turn signals DOT approved?
__________________________________________________
I wanted to become Kamen Rider as a kid. |
|
April 25th, 2011, 08:38 PM | #66 |
ninjette.org member
Name: dennis
Location: Hawaii
Join Date: Apr 2011 Motorcycle(s): 2010 250 Posts: 11
|
I'm not sure. Usually I just try to find lights that have DOT Approved stamped on them.
|
|
April 25th, 2011, 09:01 PM | #67 |
Climb to Glory!
Name: Charlie
Location: Las Vegas
Join Date: Mar 2011 Motorcycle(s): 2011 Kawasaki Ninja 250R White (sold) Posts: 234
|
i dont think cops know how to rate something that's DOT or not DOT approved all i care about is if it works and saves me from a vehicle who wouldn't have seen me if it weren't for the turn signals
__________________________________________________
I wanted to become Kamen Rider as a kid. |
|
April 25th, 2011, 09:22 PM | #68 |
ninjette.org member
Name: dennis
Location: Hawaii
Join Date: Apr 2011 Motorcycle(s): 2010 250 Posts: 11
|
It's really not the cops that I'm concerned about, it's the annual safety check. If lights don't match DOT specs, you don't pass. Some people think it's worth it to just swap out the lights for the safety check and then swap it back. I'm too lazy to do that once a year.
|
|
April 25th, 2011, 09:29 PM | #69 |
Climb to Glory!
Name: Charlie
Location: Las Vegas
Join Date: Mar 2011 Motorcycle(s): 2011 Kawasaki Ninja 250R White (sold) Posts: 234
|
yeah makes sense, that's too much trouble
__________________________________________________
I wanted to become Kamen Rider as a kid. |
|
April 25th, 2011, 09:44 PM | #70 |
The Sportisi Master
Name: Matt
Location: Chico
Join Date: May 2009 Motorcycle(s): 2008 Ninja 250 Posts: A lot.
|
Wayan judgin by your order list thus far Shipping to the US via dhl is in the $200 range. All products could be shipped once they get here for $15 or less.
__________________________________________________
Sportisimoto USA is born. |
|
April 25th, 2011, 11:05 PM | #71 | |
ninjette.org certified postwhore
Name: Wayan
Location: Bali - Indonesia
Join Date: Apr 2009 Motorcycle(s): 2014 Z250 Posts: A lot.
|
Quote:
im going there in a couple days to pick up my clipons and borrow his OEM foot rest while i wait for mine to come in from the Kawasaki dealer. i can have a look at them and give you my opinion on their condition if you are interested. im hoping to get my bike up to a driving state asap so i can test her our and see if there is any noticeable body misalignment while driving. ---------------------------------------- @ Matt, the price with DHL you mentioned, that's like a JUMBO JUNOIR box (10Kg or less & the box is 41 x 34 x 25 cm) the price i have from them is $186. is that the one your thinking of? there is also a bigger one, the Jumbo box, 20Kg or less, costs $287 though. the box is like double the size. come to think of it, im using a jumbo junior box as a foot rest atm lol... i just brought those parts with me cos i went to the post office to get shipping costs, but they were friken closed!! i called them though and got an estimate cost of shipping to America (hawaii included) by EMS express Post it costs $35 for the first Kg, then over 1 Kg, each additional kilo costs $25 to Canada the 1st kilo is $41, every additional Kg after that costs an additional $23. what matt said is true, better use a DHL package to ship if there is enough stuff, since its possible to send up to 10 kilos in the parcel (it can be as cheap as $18.6 per kilo) but it could also cost more if we dont sent enough. the problem is that it only goes to one destination and then it would need to be forwarded to the rest of you guys, again costing more shipping. so it kinda depends on what we all decide to do. this is something i suggested in the begenning ill go weigh the parts later today to give you guys an idea of what it weighs. so we can come up with some rough numbers for the shipping cost. W.
__________________________________________________
Kawasaki Z250, Bored up to 300cc with 12.8 CR, 41hp at wheel 27nm torque, Two bros full exhaust with DB killer Dynojet Power Commander V, KnN Open filter, intake and exhaust ported, Puig Windshield |
|
|
April 25th, 2011, 11:11 PM | #72 |
ninjette.org certified postwhore
Name: Wayan
Location: Bali - Indonesia
Join Date: Apr 2009 Motorcycle(s): 2014 Z250 Posts: A lot.
|
PS. there is still the option of cramming my girlfriends suitcase full of parts and ask her to give it to Charlie in Vegas, and then have him ship it out to the rest of you. the only thing that id be paranoid about and can think of that might go wrong is... Missing Suitcase...
shes leaving in like 2 and a half weeks. at the rate we are going it would probably be just as fast to give it to her, lol W.
__________________________________________________
Kawasaki Z250, Bored up to 300cc with 12.8 CR, 41hp at wheel 27nm torque, Two bros full exhaust with DB killer Dynojet Power Commander V, KnN Open filter, intake and exhaust ported, Puig Windshield |
|
April 25th, 2011, 11:14 PM | #73 |
ninjette.org member
Name: Pookey
Location: houston
Join Date: Apr 2011 Motorcycle(s): Ninja 250 Posts: 22
|
have yo made this order yet
|
|
April 25th, 2011, 11:24 PM | #74 |
ninjette.org certified postwhore
Name: Wayan
Location: Bali - Indonesia
Join Date: Apr 2009 Motorcycle(s): 2014 Z250 Posts: A lot.
|
what order? you mean if we have already closed the group buy?
nope, its still open and more are welcome to join at this point. still nothing definite. i haven't asked for money from anyone yet. im just going along at a slow pace giving you guys stuff to choose from and an idea of shipping costs, etc. anyone can join or pull out still at this point also, anyone that wants me to buy a part and ship it individually can do so as well. i can get the item within a couple days and get it shipped out. you would probably get it within 2 weeks from the time of payment. already doing that for a couple members here so far.
__________________________________________________
Kawasaki Z250, Bored up to 300cc with 12.8 CR, 41hp at wheel 27nm torque, Two bros full exhaust with DB killer Dynojet Power Commander V, KnN Open filter, intake and exhaust ported, Puig Windshield |
|
April 26th, 2011, 02:49 AM | #75 |
ninjette.org certified postwhore
Name: Wayan
Location: Bali - Indonesia
Join Date: Apr 2009 Motorcycle(s): 2014 Z250 Posts: A lot.
|
went and weighed the air scoop and the Koso kit
obviously consider that there is still packing weight on top of the actual item weight, would defeat the whole purpose of sending something as light as possible (with crappy packing) and having it arrive there broken anyhow, here is the weight: 231 grams this is a nice and light package. it would be better to pack several of them into one package since it would help make it a less flimsy package to ship. the Koso RX2 with custom bracket & voltmeter is a lot heavier: 592 + 762 = 1354 grams, plus the packing, its gonna be almost 2 Kilos... even if its a little less than 2, they round it up at the post office if its over 1.5 up to 2. so, we are looking at around $60~70 in shipping for this to america, and a little more to canada. however after i get it packed and brought to the post office it could cost a little more or a little less, this is just an indication~ based on the price they gave me over the phone, and a guess at what the packing might end up weighing. to ship this individually with DHL it would cost way too much. the only way to make it feasable to ship by DHL is to do a group buy and split the cost between the individuals. otherwise if its individually shipped the cheaper way is what i suggested above, using the express post EMS. in case someone is interested i can also get just the koso gauge + custom bracket (without hole), so without voltmeter for 2.500.000 Rp (around $295). for those who might already have a voltmeter, or something else like an A/F meter that you might want to put in instead. cheers, W
__________________________________________________
Kawasaki Z250, Bored up to 300cc with 12.8 CR, 41hp at wheel 27nm torque, Two bros full exhaust with DB killer Dynojet Power Commander V, KnN Open filter, intake and exhaust ported, Puig Windshield |
|
April 26th, 2011, 10:25 AM | #76 |
ninjette.org member
Name: Eric
Location: California, SF
Join Date: Apr 2011 Motorcycle(s): 2011 Ninja 250r SE Posts: 27
|
Wayan,
Good to know you can have the uncut version of the bezel. Now the question is, when can we start the order ? =] p.s. KOSO guage kit (us carb version) + Bezel -AzEKnightz |
|
April 26th, 2011, 10:32 AM | #77 |
ninjette.org member
Name: dennis
Location: Hawaii
Join Date: Apr 2011 Motorcycle(s): 2010 250 Posts: 11
|
Azeknight, The $295 price is thr price for the kit less voltmeter and cut out. Not sure what gear indicator you're getting but I contacted koso north America and they recommended against a gi because of signal problems. Has anyone actually gotten a gear indicator to work?
|
|
April 26th, 2011, 10:35 AM | #78 | |
ninjette.org member
Name: Eric
Location: California, SF
Join Date: Apr 2011 Motorcycle(s): 2011 Ninja 250r SE Posts: 27
|
Quote:
-AzEKnightz |
|
|
April 26th, 2011, 10:39 AM | #79 |
ninjette.org member
Name: dennis
Location: Hawaii
Join Date: Apr 2011 Motorcycle(s): 2010 250 Posts: 11
|
Yes, GI = gear indicator. I wanted one on my bike also but koso's response discouraged me. I know there are two others on this forum who tried to install GI's with the Koso gauge. According to the threads, they were not successful. I did, however, see a GI on ebay that doesn't use the measurements from the speedo and tach but uses a magnet at the shifting lever. Not sure how accurate that would be though.
|
|
April 26th, 2011, 10:51 AM | #80 | |
ninjette.org member
Name: Eric
Location: California, SF
Join Date: Apr 2011 Motorcycle(s): 2011 Ninja 250r SE Posts: 27
|
Quote:
All they need to do is make the indicator recognize 1st and neutral, the rest is + or - gearing. I hope Koso have this issue figured out, I really would like the gear indicator for the bike before I give it to my fiance to make riding easier for her. (She has no experience with clutches therefore an indicator would be awesome for her) -AzEKnightz |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
South East Texas | Plague37 | Group Rides and Local Events | 5 | March 11th, 2015 11:50 PM |
South-East England Anyone? | Kokosun | Group Rides and Local Events | 23 | August 12th, 2013 01:54 AM |
South East Race Organazation | RacerX113 | Ninjettes At Speed | 10 | October 20th, 2012 05:16 PM |
New guy from the south east | Center6701 | New Members | 10 | March 22nd, 2010 12:44 PM |
South EAST! | Obsidian | Group Rides and Local Events | 19 | July 5th, 2009 03:05 PM |
|
|