September 15th, 2011, 07:40 PM | #1 |
ninjette.org member
Name: Matt
Location: San Angelo, TX
Join Date: Aug 2011 Motorcycle(s): 2007 ZX6R Posts: 77
|
First round of small mods on my 2012
Started playing with it little by little a few days after I got it. I have already had every fairing off of it at some point. Trying to decide whether to keep playing with it or wait until I get another bike since the wife is already claiming this one. So far I have an ebay $19 tinted db windscreen (amazing quality, worth every penny), 5000k hids in lows and highs, and ebay fender eliminator (will probably end up with a more visible eliminator when I find one I want). I am still trying to decide on a custom exhaust and want to get some black or tinted flush mounts for the front.
__________________________________________________
2012 Ninja 250 - SOLD 2007 Ninja ZX6R- 2 Bros exhaust, Puig w/s, OES sliders, hid high/low |
|
September 15th, 2011, 07:49 PM | #2 |
Blue Shell magnet
Name: Nolan
Location: Northwest Washington
Join Date: Aug 2011 Motorcycle(s): 1997 Ninja 250 Posts: 816
|
You may want to change your license plate so it's more visible. One of the members just got pulled over for his and he had it mounted the same way you do. Just a suggestion, both other than that good job! Looks good!
|
|
September 15th, 2011, 08:07 PM | #3 |
ninjette.org member
Name: Matt
Location: San Angelo, TX
Join Date: Aug 2011 Motorcycle(s): 2007 ZX6R Posts: 77
|
I got the fender eliminator from a guy on ebay without knowing anything about how it would look. He said if I could get some pics of it installed for advertising he would reimburse me for it. Wasn't aware it would just mount the plate under the tail so I installed it to get him some pics. I'm looking into the targa kit with an integrated tail light such as the bike monkey. Not 100% sure on the setup though.
__________________________________________________
2012 Ninja 250 - SOLD 2007 Ninja ZX6R- 2 Bros exhaust, Puig w/s, OES sliders, hid high/low |
|
September 15th, 2011, 10:52 PM | #4 |
That rider dude.
Name: Eric
Location: Orlando, Fl.
Join Date: Apr 2011 Motorcycle(s): 2011 White Ninja 250 SE. Posts: A lot.
|
Well, Bikemonkeys on their site has a fender eliminator kit and integrated taillight bundle on their website. Click here to see it. Perhaps now maybe some L brackets could fix it? Anywho, nice bike. I love the color of the 2012 greens.
|
|
September 16th, 2011, 03:15 PM | #5 |
ninjaholic
Name: Dustin
Location: Oceanside, CA
Join Date: Jun 2010 Motorcycle(s): 09' SE 250R (sold), 03' ZX-6R, 99' XL1200C SP Posts: A lot.
Blog Entries: 3
|
Yeah, I would be careful of that plate location (like I'm one to talk with my vertically mounted tag thats illegal in CA). I would say continue to mod the bike even though the wife is "claiming it"... just get her input into it so that she continues to like the idea of modding the bike That is the eventual plan for me, although then I went and got her pregenant... so her learning to ride is put on hold
I too like the candy lime paint for 2012... just wish it had some kind of decal or design to it... I know lots of people like the plain green bike... but I think that the designs really add to the bike (guess I'm partial...lol)
__________________________________________________
09' SE Ninja 250R $2,547.83 worth of mods installed... come on Unregistered, you know you want to know what? Check my Blog "Modification List" |
|
September 18th, 2011, 10:21 PM | #6 |
Winging It In Life
Name: Umar
Location: SoCal
Join Date: Aug 2011 Motorcycle(s): 2010 250R; 2011 250R (sold) Posts: A lot.
|
I kind of wish I had just waited for the 2012 models before buying my bike just because that candy paint job is soooo beautiful.
__________________________________________________
2011 Kawasaki Ninja 250R (Bought - Apr 22, 2011; Sold - Feb 17, 2015) 2010 Kawasaki Ninja 250R (Bought - May 01, 2017; Current) |
|
September 28th, 2011, 09:39 AM | #7 |
ninjette.org member
Name: Aaron
Location: Oregon
Join Date: Aug 2011 Motorcycle(s): Ninja 250r soon Posts: 75
|
Every year their color choices make me sad. 2010 was the last year I like cause they had blue. 2011 I did kinda get into the white one...they 2012 they get rid of it wtf. I dont really want green. and I am weary with black for night riding. the red is not that bad so I think I will go with it
__________________________________________________
Getting a ninja 250 asap |
|
September 28th, 2011, 10:25 AM | #8 | |
ninjette.org certified postwhore
Name: Brian
Location: Detroit, MI
Join Date: Jun 2010 Motorcycle(s): 2009 Ninja 250R Green Posts: A lot.
|
Quote:
|
|
|
October 3rd, 2011, 09:49 AM | #9 |
Ridin Dirty
Name: Ed
Location: Delaware
Join Date: Jun 2011 Motorcycle(s): 2011 white se 250r , 2008 zx6R Posts: 921
|
looks good, i did a side mount tag on mine, right off the back chain cover bolt. that might be another alternative for you. ive been running it a few mos now and never had a issue. actually 3 of my buddys with bikes have the same setup.
__________________________________________________
#1 |
|
October 3rd, 2011, 10:42 AM | #10 |
ninjette.org member
Name: Wajeeh
Location: Toronto, Canada
Join Date: Jun 2011 Motorcycle(s): 2009 Ninja 250r Blue Posts: 55
|
can you link to the $19 wind screen?
|
|
October 6th, 2011, 05:13 PM | #11 |
ninjette.org member
Name: Matt
Location: San Angelo, TX
Join Date: Aug 2011 Motorcycle(s): 2007 ZX6R Posts: 77
|
windscreen:
http://cgi.ebay.com/ebaymotors/?cmd=...K%3AMEWNX%3AIT Unfortunately my inspection sticker is on my modified plate frame so I cant do the vertical mount. I am going to get this guy some pics and then swap it out for a normal eliminator.
__________________________________________________
2012 Ninja 250 - SOLD 2007 Ninja ZX6R- 2 Bros exhaust, Puig w/s, OES sliders, hid high/low |
|
October 6th, 2011, 07:32 PM | #12 |
ninjette.org member
Name: Matt
Location: San Angelo, TX
Join Date: Aug 2011 Motorcycle(s): 2007 ZX6R Posts: 77
|
http://cgi.ebay.com/ebaymotors/?cmd=...#ht_1978wt_979
After I get him some pics I was planning to send it back to him and get this one. http://cgi.ebay.com/ebaymotors/NINJA...#ht_1603wt_979
__________________________________________________
2012 Ninja 250 - SOLD 2007 Ninja ZX6R- 2 Bros exhaust, Puig w/s, OES sliders, hid high/low |
|
October 6th, 2011, 08:24 PM | #13 |
Ridin Dirty
Name: Ed
Location: Delaware
Join Date: Jun 2011 Motorcycle(s): 2011 white se 250r , 2008 zx6R Posts: 921
|
few of us bought one a while back off ebay out of china for $12! not sure if its still out there but i love mine for $12
__________________________________________________
#1 |
|
October 6th, 2011, 08:32 PM | #14 |
ninjette.org member
Name: Matt
Location: San Angelo, TX
Join Date: Aug 2011 Motorcycle(s): 2007 ZX6R Posts: 77
|
__________________________________________________
2012 Ninja 250 - SOLD 2007 Ninja ZX6R- 2 Bros exhaust, Puig w/s, OES sliders, hid high/low |
|
October 7th, 2011, 07:43 PM | #15 |
Ridin Dirty
Name: Ed
Location: Delaware
Join Date: Jun 2011 Motorcycle(s): 2011 white se 250r , 2008 zx6R Posts: 921
|
link, not sure if its still active but.. me and another member got ours in descent time, like 10days, few other guys had some issues with shipping though and took like 30days ! http://cgi.ebay.com/ebaymotors/WindS...Q5fAccessories
pic ..
__________________________________________________
#1 |
|
October 9th, 2011, 04:52 PM | #16 |
ninjette.org member
Name: Wajeeh
Location: Toronto, Canada
Join Date: Jun 2011 Motorcycle(s): 2009 Ninja 250r Blue Posts: 55
|
|
|
October 9th, 2011, 04:57 PM | #17 |
ninjette.org dude
Name: 1 guess :-)
Location: SF Bay Area
Join Date: Jun 2008 Motorcycle(s): '13 Ninja 300 (white, the fastest color!), '13 R1200RT, '14 CRF250L, '12 TT-R125LE Posts: Too much.
Blog Entries: 7
|
Wary:
Weary:
__________________________________________________
Montgomery Street Motorcycle Club / cal24.com / crf250l.org / ninjette.org ninjette.org Terms of Service Shopping for motorcycle parts or equipment? Come here first. The friendliest Ninja 250R/300/400 forum on the internet! (especially Unregistered) |
|
October 9th, 2011, 05:37 PM | #18 |
Ridin Dirty
Name: Ed
Location: Delaware
Join Date: Jun 2011 Motorcycle(s): 2011 white se 250r , 2008 zx6R Posts: 921
|
__________________________________________________
#1 |
|
October 9th, 2011, 06:48 PM | #19 | |
ninjette.org member
Name: TKO
Location: Winnipeg, MB
Join Date: Jan 2011 Motorcycle(s): 2010 Kawasaki Ninja 250R 2011 Honda CBR600RR Posts: 50
|
Quote:
__________________________________________________
Projekt D Fender Eliminater / DMP Integrated Taillight / Proton Flushmounts / Area P 18" CF High Mount Race System / Kleen Air System Removed / Airbox Removed / K&N R-0990 / DynoJet Jet Kit |
|
|
October 9th, 2011, 07:38 PM | #20 |
ninjette.org member
Name: Matt
Location: San Angelo, TX
Join Date: Aug 2011 Motorcycle(s): 2007 ZX6R Posts: 77
|
The bracket mounts to the undertail and bends slightly to angle the plate to make it a little more visible. Im not sure if he wants pics of it out since he is trying to patent it but there isnt much to it.
__________________________________________________
2012 Ninja 250 - SOLD 2007 Ninja ZX6R- 2 Bros exhaust, Puig w/s, OES sliders, hid high/low |
|
October 10th, 2011, 10:55 AM | #21 | |
ninjette.org member
Name: TKO
Location: Winnipeg, MB
Join Date: Jan 2011 Motorcycle(s): 2010 Kawasaki Ninja 250R 2011 Honda CBR600RR Posts: 50
|
Quote:
sorry for so many questions it looks so good and its cheap but i want to make sure i can change back without any problems.
__________________________________________________
Projekt D Fender Eliminater / DMP Integrated Taillight / Proton Flushmounts / Area P 18" CF High Mount Race System / Kleen Air System Removed / Airbox Removed / K&N R-0990 / DynoJet Jet Kit |
|
|
October 10th, 2011, 07:00 PM | #22 |
ninjette.org member
Name: Matt
Location: San Angelo, TX
Join Date: Aug 2011 Motorcycle(s): 2007 ZX6R Posts: 77
|
Correct, had to drill 2 holes to bolt it up to the undertail and 1 tiny hole for the plate light. I used the factory metal bracket to space it out and angle it slightly more back.
__________________________________________________
2012 Ninja 250 - SOLD 2007 Ninja ZX6R- 2 Bros exhaust, Puig w/s, OES sliders, hid high/low |
|
October 20th, 2011, 07:04 PM | #23 |
ninjette.org member
Name: Matt
Location: San Angelo, TX
Join Date: Aug 2011 Motorcycle(s): 2007 ZX6R Posts: 77
|
I actually got the kit with turn signals but didnt like how they looked on the test fit so I left them off.
__________________________________________________
2012 Ninja 250 - SOLD 2007 Ninja ZX6R- 2 Bros exhaust, Puig w/s, OES sliders, hid high/low |
|
October 21st, 2011, 12:08 PM | #24 |
Winging It In Life
Name: Umar
Location: SoCal
Join Date: Aug 2011 Motorcycle(s): 2010 250R; 2011 250R (sold) Posts: A lot.
|
That windscreen is nice! Looks like I'm buying one soon.
__________________________________________________
2011 Kawasaki Ninja 250R (Bought - Apr 22, 2011; Sold - Feb 17, 2015) 2010 Kawasaki Ninja 250R (Bought - May 01, 2017; Current) |
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Nemesis CVMA #74 Race Report - Round 4 2012 / Round 1 2012-13 | Nemesis | Ninjettes At Speed | 13 | September 27th, 2012 06:35 PM |
[kropotkin thinks...] - 2012 Brno MotoGP Saturday Round Up: Of Small Differences Maki | Ninjette Newsbot | Motorcycling News | 0 | August 25th, 2012 03:50 PM |
My 2012 latest mods | polokid699 | Pictures | 6 | August 22nd, 2012 09:47 AM |
Small second round for Koso RX-2 GB | RaceTech Electric | Motorcycle-related | 13 | July 19th, 2012 10:12 AM |
[nytimes.com] - For Motorbike Dealer, There Are No Small Parts, Only Small Plans | Ninjette Newsbot | Motorcycling News | 0 | November 12th, 2008 11:58 PM |
|
|