March 16th, 2012, 10:42 AM | #1 |
ninjette.org newbie
Name: Karl
Location: upstate ny
Join Date: Feb 2012 Motorcycle(s): 09 xt250,03 ex250,03 sv650,01 bonneville,98 cbr600,91 fj1200,90 fj1200,85 cb700s,84 gpz750e, Posts: 3
|
Pic's of the Custom Seat Creation on my 03
The seat came out great and alot cheaper then a Corbin or Sargent. The Givi mounts didn't come out too bad either. The brackets were originally for a pre 03 SV650. They more or less bolt right on.
Thanks for a great site! Karl |
|
March 16th, 2012, 11:56 AM | #2 |
CPT Falcon
Name: J.Emmett Turner
Location: Newnan, GA
Join Date: Apr 2009 Motorcycle(s): '08 CP Blue EX250J, '97 unpainted EX250F, 2nd '97 unpainted EX250F (no engine), '07 black EX250F Posts: A lot.
|
Looks great! I'm also impressed to hear that the Givi cases intended for an SV650 bolt right on. What parts do they actually attach to because I intend to get a highly modified pregen and I'm wondering what I might be able to attach with it's modified hardware (no fender, custom undertail exhaust, etc).
|
|
March 16th, 2012, 11:56 AM | #3 |
ninjette.org certified postwhore
Name: Jason
Location: Jacksonville, Florida
Join Date: May 2010 Motorcycle(s): 09 Ninja 250R SE, 07 Honda CRF230F, 06 Honda CRF150F Posts: A lot.
|
__________________________________________________
09 250R SE: Paying it forward one post at a time! Don't forget to add yourself to our Member Map |
|
March 16th, 2012, 03:51 PM | #4 |
User Title Free Since '12
Name: Floyd
Location: Barbados
Join Date: Dec 2010 Motorcycle(s): '10 Ninja 250R Special Edition Green Posts: A lot.
Blog Entries: 13
MOTM - Feb '12
|
What did you do to mod the seat? Some folks here have tried the same with mixed success. I'm sure you'd have an audience for some step by step suggestions. (In fact, if you look in the Save My Boys! thread, you'll find detailed discussion of testicular discomfort from the stock seat. )
__________________________________________________
"Improvement makes straight roads, but the crooked roads without improvement, are roads of genius." — William Blake |
|
March 16th, 2012, 03:58 PM | #5 |
#squid
Name: nickypoo
Location: Five Guys
Join Date: Jul 2011 Motorcycle(s): Track dedicated 2008 ZX6R Posts: A lot.
MOTM - Jul '16
|
Start a new member thread! Nice bike and
__________________________________________________
|
|
March 16th, 2012, 09:03 PM | #6 |
ninjette.org newbie
Name: Karl
Location: upstate ny
Join Date: Feb 2012 Motorcycle(s): 09 xt250,03 ex250,03 sv650,01 bonneville,98 cbr600,91 fj1200,90 fj1200,85 cb700s,84 gpz750e, Posts: 3
|
Thanks for the welcome. I did a search on the net and found a video of someone putting a cover on a ninja 500. Main thing was using a blow drier and stretching the heck out of the cover. Took me about an hour.
The givi brackets mount to the rear foot pegs and in place of the rear bungee hooks.Four modifications I had to do were 1:make a small extension for the right side bracket to hook to the foot peg, because the right bracket is shorter than the left 2:grind the locating tab off of the rear foot peg mounts 3:modify the rear fender with a hole on each side to allow the brace that attaches the two brackets together to pass thru 4:Relocate the rear directionals. I picked up a rear taillight that had the two outer bulbs, so I just hooked up my directional wires to them. The upper mounts that attach to the openings where the bungee hooks were I used bolts with spacers in place of the hooks and screws. Karl |
|
March 17th, 2012, 09:37 AM | #7 |
ninjette.org certified postwhore
Name: Rick
Location: Alexandria, Louisiana
Join Date: Jan 2009 Motorcycle(s): 05 Blue Ninja 250 Posts: Too much.
MOTY - 2017, MOTM - Jan '19, Oct '16, May '14
|
Looks great.
|
|
March 17th, 2012, 09:47 AM | #8 |
ninjette.org certified postwhore
Name: Brian
Location: Detroit, MI
Join Date: Jun 2010 Motorcycle(s): 2009 Ninja 250R Green Posts: A lot.
|
Lookin good. Once you go givi you never go back.
__________________________________________________
2009 Ninja 250R SE Green Sport Touring Style: ZG ST; Symtec heated grips; RAM GPS w/ mUSB; DIY reshaped seat; DIY Givi E21 Sidecases; 15T sprocket |
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Custom Seat Creations | Peanut_EOD | 2013 - 2017 Ninja 300 Farkles | 26 | September 5th, 2013 01:59 PM |
I need a custom red seat! | Socal5646 | 1986 - 2007 Ninja 250R Farkles | 6 | September 11th, 2011 12:31 PM |
Custom Seat Creations rear seat cover | Ninja250Ryder | 2008 - 2012 Ninja 250R Farkles | 10 | July 9th, 2009 07:51 AM |
DIY- Recovering seats with Custom Seat Creations Seat Covers | bryan | 2008 - 2012 Ninja 250R Tech Talk | 14 | March 20th, 2009 05:42 PM |
|
|