March 17th, 2012, 11:56 PM | #1721 | |
CPT Falcon
Name: J.Emmett Turner
Location: Newnan, GA
Join Date: Apr 2009 Motorcycle(s): '08 CP Blue EX250J, '97 unpainted EX250F, 2nd '97 unpainted EX250F (no engine), '07 black EX250F Posts: A lot.
|
Quote:
Anyway, I stumbled across this Keti Yoke Protector for our bike at a local place: Though it came from a product listing for the Ninja 250, I'm sure the image is only representational of the general product and not the one particularly for our bikes. I've been meaning to make a post about it for some time, since no one seems to be aware of it. And also this Kitaco KTC racing "ignition key cap" seems to be popular in Indonesia: |
|
|
March 18th, 2012, 07:57 PM | #1722 |
ninjette.org member
Name: Chadi
Location: Ottawa
Join Date: Jan 2012 Motorcycle(s): 2011 Ninja 250R Posts: 67
|
Went out on my first ride today, loving it!
Here's my favourite picture (for now) |
|
March 27th, 2012, 03:15 PM | #1723 |
That rider dude.
Name: Eric
Location: Orlando, Fl.
Join Date: Apr 2011 Motorcycle(s): 2011 White Ninja 250 SE. Posts: A lot.
|
Washed and waxed her since I first got her, she looks so good!
Here are my favorite 2.
__________________________________________________
Mods: flushmount Led front binkers, diode mod, pazzo levers, clear tank pad, racing replica grips, bike monkeys integrated tal light, zx-2r vinyls, rearsets, red bar ends, and more red accented stuff. |
|
March 27th, 2012, 03:32 PM | #1724 |
ninjette.org sage
Name: Katherine
Location: Schofield Barracks, HI
Join Date: Dec 2011 Motorcycle(s): 2009 Ninja 250R SE Posts: 767
|
|
|
March 28th, 2012, 02:57 PM | #1725 |
Blind 250 Loving Whore
Name: Tom
Location: Chesapeake, VA
Join Date: May 2011 Motorcycle(s): 2008 250R, 02 FZ1, '20 Fat Bob 114 Posts: A lot.
|
Crappy scenery just outside my garage, but the bike looks good. So far these are my favorite two. Gotta take a ride and get some better shots.
|
|
March 28th, 2012, 02:58 PM | #1726 |
KThanksBye
Name: Kevin
Location: Orange County
Join Date: Mar 2011 Motorcycle(s): 2006 zx636r Posts: A lot.
|
soooo clean, not a fan of the rims though
__________________________________________________
----> My Youtube! <---- Unregistered, watch my youtube page! |
|
March 28th, 2012, 03:57 PM | #1728 |
That rider dude.
Name: Eric
Location: Orlando, Fl.
Join Date: Apr 2011 Motorcycle(s): 2011 White Ninja 250 SE. Posts: A lot.
|
__________________________________________________
Mods: flushmount Led front binkers, diode mod, pazzo levers, clear tank pad, racing replica grips, bike monkeys integrated tal light, zx-2r vinyls, rearsets, red bar ends, and more red accented stuff. |
|
March 28th, 2012, 04:01 PM | #1729 |
Blind 250 Loving Whore
Name: Tom
Location: Chesapeake, VA
Join Date: May 2011 Motorcycle(s): 2008 250R, 02 FZ1, '20 Fat Bob 114 Posts: A lot.
|
|
|
March 28th, 2012, 04:14 PM | #1730 |
KThanksBye
Name: Kevin
Location: Orange County
Join Date: Mar 2011 Motorcycle(s): 2006 zx636r Posts: A lot.
|
__________________________________________________
----> My Youtube! <---- Unregistered, watch my youtube page! |
|
March 28th, 2012, 05:37 PM | #1731 |
Tinkerer
Name: K
Location: Chandler, AZ
Join Date: Jan 2012 Motorcycle(s): 2011 Ninja 250R Posts: 16
|
Here is my bike after recent updates...
2011 Ninja 250R - Custom decals by www.j3graphix.com - Seat Covers customseatcreations @ Bonanza - Custom-LED rear integrated lights www.ModMy250.com - Front Indicators Proton LEDs. - Mirror Extenders. - Reflective rim-tape. - Rear swingarm spools. - Shogun frame sliders. - Rearset adjusters. - Carb needles shims (1.00mm by 2 washers)
__________________________________________________
2011 Ninja 250R - Custom Decals / Solo seat cowl / Rearset Adjusters / Frame sliders / swingarm spools / Mirror extenders / fender eliminator / Shimmed needles (1.00mm) Last futzed with by taz_250R; March 28th, 2012 at 09:06 PM. |
|
March 28th, 2012, 05:40 PM | #1732 |
KThanksBye
Name: Kevin
Location: Orange County
Join Date: Mar 2011 Motorcycle(s): 2006 zx636r Posts: A lot.
|
__________________________________________________
----> My Youtube! <---- Unregistered, watch my youtube page! |
|
March 28th, 2012, 08:37 PM | #1733 |
Dan The Man
Name: Daniel
Location: Gulf Shores, AL
Join Date: Mar 2012 Motorcycle(s): 2004 Kawasaki Ninja 250r-F18 Posts: 3
|
Did someone say, Pre-gen?
__________________________________________________
"I have a very strict gun control policy: if there's a gun around, I want to be in control of it." -Clint Eastwood |
|
March 28th, 2012, 08:51 PM | #1734 |
Sexy Beast
Name: Mat
Location: Tampa
Join Date: Mar 2011 Motorcycle(s): 2010 Ninja 250R, 2006 ZX-14, 2012 Ducati Monster Posts: A lot.
|
|
|
March 28th, 2012, 09:32 PM | #1735 |
ninjette.org member
Name: Laura
Location: Toronto
Join Date: Jul 2011 Motorcycle(s): 2009 Ninja 250R Posts: 39
|
|
|
March 28th, 2012, 09:40 PM | #1736 | |
ninjette.org member
Name: Laura
Location: Toronto
Join Date: Jul 2011 Motorcycle(s): 2009 Ninja 250R Posts: 39
|
Quote:
|
|
|
March 28th, 2012, 09:57 PM | #1737 |
ninjette.org sage
Name: Katherine
Location: Schofield Barracks, HI
Join Date: Dec 2011 Motorcycle(s): 2009 Ninja 250R SE Posts: 767
|
|
|
March 28th, 2012, 10:01 PM | #1738 |
Tinkerer
Name: K
Location: Chandler, AZ
Join Date: Jan 2012 Motorcycle(s): 2011 Ninja 250R Posts: 16
|
Actually my wife thinks that a pink version would look nice... dark colors (like purple) on black would not stand out much... but hey its in the eye of the beholder...
__________________________________________________
2011 Ninja 250R - Custom Decals / Solo seat cowl / Rearset Adjusters / Frame sliders / swingarm spools / Mirror extenders / fender eliminator / Shimmed needles (1.00mm) |
|
March 28th, 2012, 10:56 PM | #1739 |
ninjette.org sage
Name: Katherine
Location: Schofield Barracks, HI
Join Date: Dec 2011 Motorcycle(s): 2009 Ninja 250R SE Posts: 767
|
My favorite color is purple....not much of a pink person. Even with my daughter...I would buy her neutral colors instead of pink when she was a baby. Now I can't get away from it. But, I do think the black and pink would look nice together.
|
|
March 28th, 2012, 11:43 PM | #1740 |
That rider dude.
Name: Eric
Location: Orlando, Fl.
Join Date: Apr 2011 Motorcycle(s): 2011 White Ninja 250 SE. Posts: A lot.
|
Im surprised it came out so glossy. Or is that just how it looks in the pic?
__________________________________________________
Mods: flushmount Led front binkers, diode mod, pazzo levers, clear tank pad, racing replica grips, bike monkeys integrated tal light, zx-2r vinyls, rearsets, red bar ends, and more red accented stuff. |
|
March 28th, 2012, 11:53 PM | #1741 |
ninjette.org sage
Name: Katherine
Location: Schofield Barracks, HI
Join Date: Dec 2011 Motorcycle(s): 2009 Ninja 250R SE Posts: 767
|
Here's my crappy paint redo of your bike. I know it's not great but just an idea.
|
|
March 29th, 2012, 12:00 AM | #1742 |
ninjette.org certified postwhore
Name: Eric
Location: Nashville, TN
Join Date: Oct 2011 Motorcycle(s): 2009 CBR600rr Posts: A lot.
Blog Entries: 1
|
Krylon Fusion comes out very nicely on plastic if done with nice thin, even coats. If you want it even glossier, you can clear coat it.
|
|
March 29th, 2012, 10:40 AM | #1743 | |
Tinkerer
Name: K
Location: Chandler, AZ
Join Date: Jan 2012 Motorcycle(s): 2011 Ninja 250R Posts: 16
|
Quote:
Great concept rendering. I like the level of detail in coloring on the rims, you actually accounted for brake line as well. That was a nice touch...
__________________________________________________
2011 Ninja 250R - Custom Decals / Solo seat cowl / Rearset Adjusters / Frame sliders / swingarm spools / Mirror extenders / fender eliminator / Shimmed needles (1.00mm) |
|
|
March 29th, 2012, 12:28 PM | #1744 |
#squid
Name: nickypoo
Location: Five Guys
Join Date: Jul 2011 Motorcycle(s): Track dedicated 2008 ZX6R Posts: A lot.
MOTM - Jul '16
|
__________________________________________________
|
|
March 29th, 2012, 04:07 PM | #1745 |
ninjette.org member
Name: Kody
Location: theodore
Join Date: Feb 2012 Motorcycle(s): 2003 Ninja 250 Posts: 91
|
Here ya go
|
|
March 29th, 2012, 05:51 PM | #1746 |
Tinkerer
Name: K
Location: Chandler, AZ
Join Date: Jan 2012 Motorcycle(s): 2011 Ninja 250R Posts: 16
|
Very nicely rendered... can you explain how you did it... I am sure you used PhotoShop and steps that you followed would be priceless...
Since it is off-topic, please PM me the steps/technique...
__________________________________________________
2011 Ninja 250R - Custom Decals / Solo seat cowl / Rearset Adjusters / Frame sliders / swingarm spools / Mirror extenders / fender eliminator / Shimmed needles (1.00mm) |
|
March 29th, 2012, 08:20 PM | #1747 | |
ninjette.org certified postwhore
Name: Jono
Location: Memphis, TN
Join Date: Sep 2011 Motorcycle(s): 2009 Triumph Street Triple, 2009 KLX250SF, 2003 Suzuki SV650S (Sold), 2006 Ninja 250 (Sold) Posts: A lot.
|
Quote:
I am gonna have to go with pink on this one! It looks great with the black. The purple just gets washed out. But the pink pops right out just like the orange. Heck, I think I would ride that pink bike. lol |
|
|
March 29th, 2012, 08:56 PM | #1748 | |
Tinkerer
Name: K
Location: Chandler, AZ
Join Date: Jan 2012 Motorcycle(s): 2011 Ninja 250R Posts: 16
|
Quote:
That is why I have orange decals...
__________________________________________________
2011 Ninja 250R - Custom Decals / Solo seat cowl / Rearset Adjusters / Frame sliders / swingarm spools / Mirror extenders / fender eliminator / Shimmed needles (1.00mm) |
|
|
March 29th, 2012, 08:57 PM | #1749 |
ninjette.org sage
Name: Katherine
Location: Schofield Barracks, HI
Join Date: Dec 2011 Motorcycle(s): 2009 Ninja 250R SE Posts: 767
|
|
|
March 30th, 2012, 12:19 AM | #1750 |
Two wheeled samurai
Name: Abhishek
Location: India
Join Date: Jan 2010 Motorcycle(s): Kawasaki Ninja 250R, Yamaha RXZ Posts: 34
|
|
|
March 30th, 2012, 07:58 AM | #1751 |
Tinkerer
Name: K
Location: Chandler, AZ
Join Date: Jan 2012 Motorcycle(s): 2011 Ninja 250R Posts: 16
|
Hey ForceofWill nice bike...
what (make/model) are these headlights? where did you buy these?
__________________________________________________
2011 Ninja 250R - Custom Decals / Solo seat cowl / Rearset Adjusters / Frame sliders / swingarm spools / Mirror extenders / fender eliminator / Shimmed needles (1.00mm) |
|
March 30th, 2012, 08:13 AM | #1752 |
Blind 250 Loving Whore
Name: Tom
Location: Chesapeake, VA
Join Date: May 2011 Motorcycle(s): 2008 250R, 02 FZ1, '20 Fat Bob 114 Posts: A lot.
|
Got the kit from theretrofitsource and fabed it up. Tri and myself have DIYs on it in the sticky.
|
|
March 30th, 2012, 11:00 AM | #1753 |
Intrepid Adventurer
Name: Josh
Location: Rochester/Buffalo NY
Join Date: Jan 2012 Motorcycle(s): 2004 GSXR 750 , 71 cb350streettracker, 07 Polaris Predator 500 Posts: A lot.
|
|
|
March 30th, 2012, 03:45 PM | #1754 |
ninjette.org member
Name: Kody
Location: theodore
Join Date: Feb 2012 Motorcycle(s): 2003 Ninja 250 Posts: 91
|
this is the only pic I have so I figured I'd throw it in
|
|
March 31st, 2012, 05:43 AM | #1756 |
ninjette.org guru
Name: Larry
Location: Youngstown, Ohio
Join Date: Oct 2011 Motorcycle(s): 06 KLR 650,12 250 Ninja, 86 DR 125, 07 CRF 100, 09 Tomos Streetmate LEL Record Holder, 88 K100 RT Posts: 434
|
My 92 Ninja
Here's my stock 92' 250 Ninja
__________________________________________________
wardie |
|
March 31st, 2012, 06:35 AM | #1757 |
ninjette.org member
Name: John
Location: Caledonia, Ontario, Canada
Join Date: Jul 2010 Motorcycle(s): Honda, Buell, Kawasaki, Suzuki, Yamaha Posts: 170
|
Nice, like the red wheels Larry.
|
|
March 31st, 2012, 02:46 PM | #1758 | |
ninjette.org member
Name: Kody
Location: theodore
Join Date: Feb 2012 Motorcycle(s): 2003 Ninja 250 Posts: 91
|
Quote:
No, seriously I dont know. It was installed by the previous owner. But heres what I can tell you. I know it is quicker off the line than a stock pregen system and alot faster than the newgen bikes(test drives of other bikes are my only source lol) but after 50mph i'd say its about the same, and it sounds (IMHO) alot better than the yoshi. Thats the only other aftermarket Ive heard on a 250. Still hits the powerband after 5-6k, it idles at 2k, and it cruises 75mph at 8.5k I'll wait another 1000 miles before I do a tune up and I might pull the carbs to check it out at that point (prolly not though since its ran beautifully so far LOL) Anyways I cant wait to start customizing her this summer. Got some great looking bikes on this thread and I need to catch up |
|
|
March 31st, 2012, 02:49 PM | #1759 |
ninjette.org certified postwhore
Name: .
Location: .
Join Date: Feb 2011 Motorcycle(s): . Posts: Too much.
MOTM - Feb '13, Feb '14
|
Thanks, I was just wondering what it was in comparison to the stock jetting. I opened my intake and have Slip-on's but am working on getting a muzzy. Just thinking about my jetting needs. I'm betting my intake will still be the bottle-neck, (even opened up) so I'm not too worried about my jetting needing changed.
|
|
March 31st, 2012, 03:27 PM | #1760 |
ninjette.org sage
Name: Katherine
Location: Schofield Barracks, HI
Join Date: Dec 2011 Motorcycle(s): 2009 Ninja 250R SE Posts: 767
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Post A Current Picture Of Your Area! | Brian | Pictures | 214 | November 18th, 2014 04:01 AM |
My first picture post - 2008 Ninja | joshuajcrouch | Pictures | 9 | August 9th, 2012 02:39 PM |
My Baby on My Baby | Gfortunes | Pictures | 9 | October 3rd, 2011 09:39 PM |
[superbikeplanet.com] - Picture of Ben Bostrom's Post-Crash Ass. Not For the Faint of | Ninjette Newsbot | Motorcycling News | 0 | September 10th, 2009 01:51 PM |
[topix.net] - Harley Baby Clothing: Buying Harley Davidson Baby Clothes | Ninjette Newsbot | Motorcycling News | 0 | August 6th, 2009 10:50 PM |
|
|