May 9th, 2012, 03:58 PM | #1 |
Pace
Name: Steven
Location: Erie PA
Join Date: Apr 2012 Motorcycle(s): 2011 Ninja 250r SE Posts: 10
Blog Entries: 1
|
Turn Signal Problems
hey all i just did the diy flushmount signals for the front, so all the wiring and resistance is the same, but now when i turn my right signal on the front flashes and both my rear lights flash, and when i turn on the left none of the lights come on. I have Led's in the rear if that means anything. And they were working fine before i modded the front. Thoghts plz thanks.
|
|
May 9th, 2012, 04:03 PM | #2 |
ninjette.org certified postwhore
Name: Sean
Location: Middle TN
Join Date: Apr 2012 Motorcycle(s): 2010 Ninja 250r (sold) / '03 CBR 600RR Posts: A lot.
|
Did you get a new relay for them?
|
|
May 9th, 2012, 04:13 PM | #4 |
ninjette.org certified postwhore
Name: Sean
Location: Middle TN
Join Date: Apr 2012 Motorcycle(s): 2010 Ninja 250r (sold) / '03 CBR 600RR Posts: A lot.
|
Ohh I see, the "diy" flushmounts, modifying the stock ones. I originally had turn signal issues; I opened up the signals and found that the two metal connections on the back of the bulb were either reversed or loose. Perhaps during the modification one came loose or something? Idk much about electrical stuff though.
|
|
May 9th, 2012, 04:37 PM | #5 |
Pace
Name: Steven
Location: Erie PA
Join Date: Apr 2012 Motorcycle(s): 2011 Ninja 250r SE Posts: 10
Blog Entries: 1
|
Ive checked all the connections and im sure theyre all right, idk if its possible when i was sanding them down maybe i sanded a component off? but i doubt it
|
|
May 9th, 2012, 06:56 PM | #6 |
ninjette.org member
Name: Tom
Location: Dayton, oh
Join Date: Mar 2012 Motorcycle(s): 2011 250r Posts: 72
|
Diode kit on the front and a new LED relay does the trick
it'll run you under $40 shipped for both from customled.com Posted via Mobile Device |
|
May 10th, 2012, 07:59 AM | #7 |
Pace
Name: Steven
Location: Erie PA
Join Date: Apr 2012 Motorcycle(s): 2011 Ninja 250r SE Posts: 10
Blog Entries: 1
|
I figured it out, apparently when i was sanding down the front signal insert the vibration must have messed the bulb up, i switched it with another bulb and it works fine now
|
|
May 15th, 2012, 01:11 AM | #8 |
..as why hard.
Name: Ansonn
Location: honolulu
Join Date: Jun 2011 Motorcycle(s): 2004 ninja EX250F Posts: 33
|
Signal problem shooting
I am currently experiencing a similar problem. I have (cat eye) front LED blinkers on the front, the rear is currently stock. With the stock flasher, everything ran fine, for over a year. I while working on a gas tank repair, I decided to convert to street fighter for the time being. I took this opportunity to change the connectors to my front blinkers. After that was complete, it worked for a while, then later that day, all signals completely failed, nothing turns on. I checked the wiring, all is good. I went ahead and odrered a new flasher-relay; but I was just wondering....
-would the size of the connectors and gauge of the wire have an affect on electronic performance? Would it be possible that (if it does affect) that it could have contributed to blowing the flasher? Anything would be much appreciated! |
|
May 15th, 2012, 04:40 PM | #9 | |
Pace
Name: Steven
Location: Erie PA
Join Date: Apr 2012 Motorcycle(s): 2011 Ninja 250r SE Posts: 10
Blog Entries: 1
|
Quote:
|
|
|
May 19th, 2012, 11:20 PM | #10 |
..as why hard.
Name: Ansonn
Location: honolulu
Join Date: Jun 2011 Motorcycle(s): 2004 ninja EX250F Posts: 33
|
Thanks, I ended up changing the wires and connectors. I double checked the fuse box and found a HAIRLINE gap in a Blown fuse =\.
Everything is now working properly =]
__________________________________________________
....as long as still get to eat pizza, ainokea.! |
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Signal problems | MisterLu | 2008 - 2012 Ninja 250R Tech Talk | 1 | July 13th, 2014 04:25 PM |
LED Turn Signal problems | nestlesnipes | 2008 - 2012 Ninja 250R Tech Talk | 2 | February 8th, 2014 11:33 PM |
More turn signal problems.. Unusual.. | leed | 2008 - 2012 Ninja 250R Farkles | 1 | June 17th, 2012 08:23 PM |
Signal indicator and tail light problems! | OfficerLove | 1986 - 2007 Ninja 250R Tech Talk | 5 | December 18th, 2011 02:59 PM |
LED turn signal problems | shadowskater | 2008 - 2012 Ninja 250R Farkles | 12 | August 14th, 2010 03:08 PM |
|
|