October 26th, 2012, 07:01 PM | #1 |
Jigglin' your Jiglets
Name: Sean
Location: San Jose, Ca
Join Date: Jun 2011 Motorcycle(s): 2009 K1300S, 2013 Ninja 300, 2011 Ninja 250R, Faster than Unregistered's ninjette Posts: Too much.
Blog Entries: 1
MOTM - Apr '13
|
Finger Hole Mod
Step 1: Drill a small hole in your dash fairing
Step 2: Put your finger in the hole Results
__________________________________________________
If the Ninja 250 doesn't have enough power for you, then you don't know how to ride it. AFM #676 Supersports are for n00bs |
|
October 26th, 2012, 07:08 PM | #2 |
ninjette.org member
Name: Paul
Location: Orange County/Inland Empire - CA
Join Date: Sep 2012 Motorcycle(s): 2001 Ninja 250R Posts: 126
|
wut
__________________________________________________
View my log here. you can tell a lot about how it was treated by how the previous owner looks - Joshorilla |
|
October 26th, 2012, 07:09 PM | #3 |
ninjette.org sage
Name: Peanut
Location: Senoia, GA
Join Date: Feb 2011 Motorcycle(s): Green 2013 ZX-6R Posts: 723
|
Are you bored Jiggles?
__________________________________________________
http://www.simplysurrealphotography....es/peanut2.png |
|
October 26th, 2012, 07:21 PM | #4 |
Jigglin' your Jiglets
Name: Sean
Location: San Jose, Ca
Join Date: Jun 2011 Motorcycle(s): 2009 K1300S, 2013 Ninja 300, 2011 Ninja 250R, Faster than Unregistered's ninjette Posts: Too much.
Blog Entries: 1
MOTM - Apr '13
|
Mostly tired, plus its dark out
__________________________________________________
If the Ninja 250 doesn't have enough power for you, then you don't know how to ride it. AFM #676 Supersports are for n00bs |
|
October 26th, 2012, 08:37 PM | #5 |
ninjette.org certified postwhore
Name: .
Location: .
Join Date: Feb 2011 Motorcycle(s): . Posts: Too much.
MOTM - Feb '13, Feb '14
|
Heated grip controller?
God you're so bored haha. Same |
|
October 26th, 2012, 08:38 PM | #6 |
Jigglin' your Jiglets
Name: Sean
Location: San Jose, Ca
Join Date: Jun 2011 Motorcycle(s): 2009 K1300S, 2013 Ninja 300, 2011 Ninja 250R, Faster than Unregistered's ninjette Posts: Too much.
Blog Entries: 1
MOTM - Apr '13
|
Chodes got it
I would have finished but it got dark out
__________________________________________________
If the Ninja 250 doesn't have enough power for you, then you don't know how to ride it. AFM #676 Supersports are for n00bs |
|
October 26th, 2012, 09:00 PM | #7 |
ninjette.org guru
Name: Bill
Location: Orlando
Join Date: Dec 2008 Motorcycle(s): 2008 Ninja 250r - Traded for 2009 ER-6N Posts: 424
|
Should have made a bigger hole. Then you could love your bike...
__________________________________________________
|
|
October 26th, 2012, 09:08 PM | #8 |
Jigglin' your Jiglets
Name: Sean
Location: San Jose, Ca
Join Date: Jun 2011 Motorcycle(s): 2009 K1300S, 2013 Ninja 300, 2011 Ninja 250R, Faster than Unregistered's ninjette Posts: Too much.
Blog Entries: 1
MOTM - Apr '13
|
OH don't worry, its plenty big
__________________________________________________
If the Ninja 250 doesn't have enough power for you, then you don't know how to ride it. AFM #676 Supersports are for n00bs |
|
October 26th, 2012, 09:25 PM | #9 |
ninjette.org guru
Name: Martin
Location: California
Join Date: Jun 2012 Motorcycle(s): 250r Posts: 291
|
lol
|
|
October 27th, 2012, 09:38 AM | #10 |
ninjette.org member
Name: Paul
Location: Orange County/Inland Empire - CA
Join Date: Sep 2012 Motorcycle(s): 2001 Ninja 250R Posts: 126
|
__________________________________________________
View my log here. you can tell a lot about how it was treated by how the previous owner looks - Joshorilla |
|
October 27th, 2012, 10:17 AM | #11 |
ninjette.org certified postwhore
Name: Whodat
Location: Ware Is.,MA
Join Date: Jan 2009 Motorcycle(s): I pass the wind! Posts: A lot.
MOTM - Mar '13, Jun '14
|
Why would anyone need heated grips? I ride all winter and gloves are all I need. I can see that the girls might need alittle warmth for their pretty little fingers, but as a guy, if you need heated grips you might as well retire to a BMW (Goldwings probably have them too).
__________________________________________________
If everything seems under control; you're just not going fast enough! |
|
October 27th, 2012, 10:27 AM | #12 | |
Jigglin' your Jiglets
Name: Sean
Location: San Jose, Ca
Join Date: Jun 2011 Motorcycle(s): 2009 K1300S, 2013 Ninja 300, 2011 Ninja 250R, Faster than Unregistered's ninjette Posts: Too much.
Blog Entries: 1
MOTM - Apr '13
|
Quote:
__________________________________________________
If the Ninja 250 doesn't have enough power for you, then you don't know how to ride it. AFM #676 Supersports are for n00bs |
|
|
October 27th, 2012, 10:53 AM | #13 |
ninjette.org member
Name: Andrew
Location: Orlando, FL
Join Date: Jun 2011 Motorcycle(s): 2014 300 Posts: 162
|
|
|
October 27th, 2012, 10:59 AM | #14 |
Jigglin' your Jiglets
Name: Sean
Location: San Jose, Ca
Join Date: Jun 2011 Motorcycle(s): 2009 K1300S, 2013 Ninja 300, 2011 Ninja 250R, Faster than Unregistered's ninjette Posts: Too much.
Blog Entries: 1
MOTM - Apr '13
|
__________________________________________________
If the Ninja 250 doesn't have enough power for you, then you don't know how to ride it. AFM #676 Supersports are for n00bs |
|
October 27th, 2012, 11:09 AM | #15 |
ninjette.org mafioso
Name: Ben
Location: Dillon, MT
Join Date: Jul 2012 Motorcycle(s): 2009 Ninja 250R Posts: 337
|
|
|
October 27th, 2012, 11:20 AM | #16 |
ninjette.org certified postwhore
Name: Sean
Location: Middle TN
Join Date: Apr 2012 Motorcycle(s): 2010 Ninja 250r (sold) / '03 CBR 600RR Posts: A lot.
|
The high here is 45 today, with drizzling rain all day
Very unusual for TN this early...wish I had some heated grips. |
|
October 27th, 2012, 11:57 AM | #17 | |
Jigglin' your Jiglets
Name: Sean
Location: San Jose, Ca
Join Date: Jun 2011 Motorcycle(s): 2009 K1300S, 2013 Ninja 300, 2011 Ninja 250R, Faster than Unregistered's ninjette Posts: Too much.
Blog Entries: 1
MOTM - Apr '13
|
Quote:
Heated grips ftw
__________________________________________________
If the Ninja 250 doesn't have enough power for you, then you don't know how to ride it. AFM #676 Supersports are for n00bs |
|
|
October 27th, 2012, 12:56 PM | #18 |
ninjette.org certified postwhore
Name: Sean
Location: Middle TN
Join Date: Apr 2012 Motorcycle(s): 2010 Ninja 250r (sold) / '03 CBR 600RR Posts: A lot.
|
|
|
October 27th, 2012, 01:04 PM | #19 |
ninjette.org sage
Name: Fox
Location: Boston
Join Date: May 2012 Motorcycle(s): 08 250R Posts: 881
|
Heated grips in Cali, HA!
Already had one am ride in the 20's here. Now that's a call for heated grips. |
|
October 27th, 2012, 03:15 PM | #20 |
Jigglin' your Jiglets
Name: Sean
Location: San Jose, Ca
Join Date: Jun 2011 Motorcycle(s): 2009 K1300S, 2013 Ninja 300, 2011 Ninja 250R, Faster than Unregistered's ninjette Posts: Too much.
Blog Entries: 1
MOTM - Apr '13
|
Or, you could be a vagina and winterize your bike
__________________________________________________
If the Ninja 250 doesn't have enough power for you, then you don't know how to ride it. AFM #676 Supersports are for n00bs |
|
October 27th, 2012, 03:45 PM | #21 |
ninjette.org guru
Name: Bill
Location: Orlando
Join Date: Dec 2008 Motorcycle(s): 2008 Ninja 250r - Traded for 2009 ER-6N Posts: 424
|
I winterized mine. I cleaned my chain, ready for winter!
__________________________________________________
|
|
October 27th, 2012, 04:04 PM | #22 |
ninjette.org certified postwhore
Name: Jason
Location: Norfolk, VA
Join Date: Dec 2011 Motorcycle(s): 2012 EX250, 2014 EX300 Posts: A lot.
|
so what was the surgeons choice of tool, dremel?
__________________________________________________
Ethioknight Memorial Fund- Sticker sale http://www.ninjette.org/forums/showthread.php?t=111700 |
|
October 27th, 2012, 04:51 PM | #23 |
Jigglin' your Jiglets
Name: Sean
Location: San Jose, Ca
Join Date: Jun 2011 Motorcycle(s): 2009 K1300S, 2013 Ninja 300, 2011 Ninja 250R, Faster than Unregistered's ninjette Posts: Too much.
Blog Entries: 1
MOTM - Apr '13
|
I used a drill and a drill bit and then I drilled her
__________________________________________________
If the Ninja 250 doesn't have enough power for you, then you don't know how to ride it. AFM #676 Supersports are for n00bs |
|
October 27th, 2012, 06:00 PM | #24 |
Frak It
Name: Sean
Location: SWFL
Join Date: Dec 2008 Motorcycle(s): 2008 Ninja 250R Posts: 199
|
That's about the same place I put one there. Being in FL, I just use it to charge my phone while I use it for Pandora/GPS.
|
|
October 27th, 2012, 06:08 PM | #25 |
ninjette.org member
Name: Paul
Location: Orange County/Inland Empire - CA
Join Date: Sep 2012 Motorcycle(s): 2001 Ninja 250R Posts: 126
|
Its late October, 6pm...AND 90 MOTHERF'NG degrees out. I really hate where I live.
__________________________________________________
View my log here. you can tell a lot about how it was treated by how the previous owner looks - Joshorilla |
|
October 27th, 2012, 06:11 PM | #26 |
Jigglin' your Jiglets
Name: Sean
Location: San Jose, Ca
Join Date: Jun 2011 Motorcycle(s): 2009 K1300S, 2013 Ninja 300, 2011 Ninja 250R, Faster than Unregistered's ninjette Posts: Too much.
Blog Entries: 1
MOTM - Apr '13
|
It's 79 out right now, nice weather these past few days
__________________________________________________
If the Ninja 250 doesn't have enough power for you, then you don't know how to ride it. AFM #676 Supersports are for n00bs |
|
October 27th, 2012, 06:21 PM | #27 |
Fix It Till Ya Break It
Name: Asspyre
Location: T.Dot
Join Date: Oct 2011 Motorcycle(s): 08 250RRrrrr Posts: 623
|
Get good gloves, I've yet to have the need for heated grips, and trust me, it gets cold up here.
Heated helmet would be nice though. oh, and its 4 degrees out (39F for those using the wrong system) |
|
October 27th, 2012, 06:22 PM | #28 |
Jigglin' your Jiglets
Name: Sean
Location: San Jose, Ca
Join Date: Jun 2011 Motorcycle(s): 2009 K1300S, 2013 Ninja 300, 2011 Ninja 250R, Faster than Unregistered's ninjette Posts: Too much.
Blog Entries: 1
MOTM - Apr '13
|
I have the best gloves ever made
__________________________________________________
If the Ninja 250 doesn't have enough power for you, then you don't know how to ride it. AFM #676 Supersports are for n00bs |
|
October 27th, 2012, 06:24 PM | #29 |
Fix It Till Ya Break It
Name: Asspyre
Location: T.Dot
Join Date: Oct 2011 Motorcycle(s): 08 250RRrrrr Posts: 623
|
I'm talking bout the ones for your hand
|
|
October 27th, 2012, 06:26 PM | #30 |
Jigglin' your Jiglets
Name: Sean
Location: San Jose, Ca
Join Date: Jun 2011 Motorcycle(s): 2009 K1300S, 2013 Ninja 300, 2011 Ninja 250R, Faster than Unregistered's ninjette Posts: Too much.
Blog Entries: 1
MOTM - Apr '13
|
__________________________________________________
If the Ninja 250 doesn't have enough power for you, then you don't know how to ride it. AFM #676 Supersports are for n00bs |
|
October 27th, 2012, 07:06 PM | #31 |
Fast-Guy wannabe
Name: Jason
Location: Brentwood, Ca
Join Date: Oct 2011 Motorcycle(s): 2009 Ninja250, 2011 RM-Z250, 2004 NSR50, Posts: A lot.
MOTM - Jan '13
|
Am I doing this right? So what now, is my bike faster yet?
|
|
October 27th, 2012, 07:09 PM | #32 |
Jigglin' your Jiglets
Name: Sean
Location: San Jose, Ca
Join Date: Jun 2011 Motorcycle(s): 2009 K1300S, 2013 Ninja 300, 2011 Ninja 250R, Faster than Unregistered's ninjette Posts: Too much.
Blog Entries: 1
MOTM - Apr '13
|
Try putting your finger all the way through
__________________________________________________
If the Ninja 250 doesn't have enough power for you, then you don't know how to ride it. AFM #676 Supersports are for n00bs |
|
October 27th, 2012, 07:14 PM | #33 |
Jigglin' your Jiglets
Name: Sean
Location: San Jose, Ca
Join Date: Jun 2011 Motorcycle(s): 2009 K1300S, 2013 Ninja 300, 2011 Ninja 250R, Faster than Unregistered's ninjette Posts: Too much.
Blog Entries: 1
MOTM - Apr '13
|
Next you're going to want to add the turbo switch. This is going to change your bike from a sniveling pussy into an ordinary house cat.
Be sure to add some plasti dip and make it look like ****. Lo = 600 Hi = Turbo busa w/ NOS
__________________________________________________
If the Ninja 250 doesn't have enough power for you, then you don't know how to ride it. AFM #676 Supersports are for n00bs |
|
October 27th, 2012, 09:01 PM | #34 |
RIP Alex
Name: Cuong
Location: Houston, TX
Join Date: Apr 2011 Motorcycle(s): '10 250r, '09 265r Posts: A lot.
Blog Entries: 2
|
Install mine for me. I'll feed you beer.
__________________________________________________
HalfFast Racing Team Serving Greater Houston Area Riders:WFO Riders MotoHouston HPC CMRA Ride Smart Fastline Lone Star Track Days |
|
October 27th, 2012, 09:02 PM | #35 |
Jigglin' your Jiglets
Name: Sean
Location: San Jose, Ca
Join Date: Jun 2011 Motorcycle(s): 2009 K1300S, 2013 Ninja 300, 2011 Ninja 250R, Faster than Unregistered's ninjette Posts: Too much.
Blog Entries: 1
MOTM - Apr '13
|
I accept. Bring something mexican and not in a can
__________________________________________________
If the Ninja 250 doesn't have enough power for you, then you don't know how to ride it. AFM #676 Supersports are for n00bs |
|
October 27th, 2012, 09:14 PM | #36 |
RIP Alex
Name: Cuong
Location: Houston, TX
Join Date: Apr 2011 Motorcycle(s): '10 250r, '09 265r Posts: A lot.
Blog Entries: 2
|
__________________________________________________
HalfFast Racing Team Serving Greater Houston Area Riders:WFO Riders MotoHouston HPC CMRA Ride Smart Fastline Lone Star Track Days |
|
October 27th, 2012, 09:15 PM | #37 |
Jigglin' your Jiglets
Name: Sean
Location: San Jose, Ca
Join Date: Jun 2011 Motorcycle(s): 2009 K1300S, 2013 Ninja 300, 2011 Ninja 250R, Faster than Unregistered's ninjette Posts: Too much.
Blog Entries: 1
MOTM - Apr '13
|
Number 2
Is preferable....
__________________________________________________
If the Ninja 250 doesn't have enough power for you, then you don't know how to ride it. AFM #676 Supersports are for n00bs |
|
October 27th, 2012, 09:33 PM | #38 |
RIP Alex
Name: Cuong
Location: Houston, TX
Join Date: Apr 2011 Motorcycle(s): '10 250r, '09 265r Posts: A lot.
Blog Entries: 2
|
Hmm.. maybe I should install a cup holder on the bike.
__________________________________________________
HalfFast Racing Team Serving Greater Houston Area Riders:WFO Riders MotoHouston HPC CMRA Ride Smart Fastline Lone Star Track Days |
|
October 27th, 2012, 09:42 PM | #39 |
Jigglin' your Jiglets
Name: Sean
Location: San Jose, Ca
Join Date: Jun 2011 Motorcycle(s): 2009 K1300S, 2013 Ninja 300, 2011 Ninja 250R, Faster than Unregistered's ninjette Posts: Too much.
Blog Entries: 1
MOTM - Apr '13
|
There is no mod more useful
__________________________________________________
If the Ninja 250 doesn't have enough power for you, then you don't know how to ride it. AFM #676 Supersports are for n00bs |
|
October 27th, 2012, 09:51 PM | #40 |
RIP Alex
Name: Cuong
Location: Houston, TX
Join Date: Apr 2011 Motorcycle(s): '10 250r, '09 265r Posts: A lot.
Blog Entries: 2
|
Where did you get yours at. I've been meaning to find something useful to use the stock handle bar holes for.
__________________________________________________
HalfFast Racing Team Serving Greater Houston Area Riders:WFO Riders MotoHouston HPC CMRA Ride Smart Fastline Lone Star Track Days |
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
I'm an a**hole... | BlueHairSar | Pictures | 24 | February 11th, 2014 07:38 AM |
what's this hole for? | 05Ninjette89 | 1986 - 2007 Ninja 250R Tech Talk | 4 | April 5th, 2013 09:43 AM |
To mod or not to mod, that is the question... | RiderOnTheStorm | General Motorcycling Discussion | 19 | October 29th, 2012 08:21 PM |
What is this hole..?? | davenay67 | 1986 - 2007 Ninja 250R Tech Talk | 14 | May 3rd, 2012 06:47 AM |
what is this hole for????? | crazymater91 | 1986 - 2007 Ninja 250R Tech Talk | 10 | May 31st, 2011 03:44 PM |
|
|