May 14th, 2013, 04:24 PM | #121 |
ninjette.org certified postwhore
Name: Al
Location: York, Pa
Join Date: Dec 2012 Motorcycle(s): 2013 Ninja 300..............2008 Ninja 500-sold...2009 Ninja 250-Crashed Posts: Too much.
MOTM - Sep '14
|
When do you expect your English made replacement part?
|
|
May 14th, 2013, 04:29 PM | #122 |
ninjette.org member
Name: drac
Location: VA
Join Date: Mar 2012 Motorcycle(s): '88 Hurricane 600, '09 Ninja 250 Posts: 237
|
F%#k...... Someone drew a line. Guess the fun is over.
I am cool if you guys are. I guess I should post at least one thing related to the actual topic.................... 3D printing will have an impact on the average person as much as the interwebz has. It may well revolutionize commerce in ways not yet anticipated. You know... the Law of Unintended Consequences and all that stuff.................
__________________________________________________
While no trees were harmed in making this post, a large number of electrons were severely inconvenienced. |
|
May 14th, 2013, 04:39 PM | #123 | |
ninjette.org member
Name: Adam
Location: Ohio
Join Date: Jul 2012 Motorcycle(s): 2004 Ninja 250 Posts: 178
|
Quote:
In our case, we lowside our bikes and scratch the fairings to hell and back. Why pay a couple hundred for replacements when we can just print out new ones? It's going to be interesting to see how companies figure out how to continue to sell their product when the consumer no longer necessarily has to buy it. |
|
|
May 14th, 2013, 05:06 PM | #124 |
ninjette.org member
Name: drac
Location: VA
Join Date: Mar 2012 Motorcycle(s): '88 Hurricane 600, '09 Ninja 250 Posts: 237
|
I see it much in the same vein as mp3s......... My reference to the Law of unintended Consequences was the fact that if this becomes cheap and widely available i can see the Fed Gov't stepping in and using it as a excuse to greatly broaden their control and censoring of the internet. Imagine..... one person buys a newfangled screwdriver, scans it to a file and no one ever has to buy that screwdriver again. Major corporations out of business in the blink of an eye. Economies crash, world is thrown into chaos, dogs and cats living together................ scary stuff.
__________________________________________________
While no trees were harmed in making this post, a large number of electrons were severely inconvenienced. |
|
May 14th, 2013, 05:35 PM | #125 |
ninjette.org certified postwhore
Name: Jason
Location: Norfolk, VA
Join Date: Dec 2011 Motorcycle(s): 2012 EX250, 2014 EX300 Posts: A lot.
|
It would test the economies of scale, shipping, and manufacturing.
A lot of simple manufacturing would become a specialized market, but the raw material markets would grow exponentially. People kind of thought the same way with cnc mills. At first it ended up being too hard for average person to use. Once the software got easier to use they kind of took off. They only thing holding them back are the raw material costs and tooling. Reprap machines are a lot easier to work with and require no tooling. I'm looking to raise the temp of my hot end to flow pewter.
__________________________________________________
Ethioknight Memorial Fund- Sticker sale http://www.ninjette.org/forums/showthread.php?t=111700 |
|
May 14th, 2013, 08:28 PM | #126 |
Avid Kitteh Poster
Name: Justin
Location: Norcal
Join Date: Sep 2011 Motorcycle(s): 2006 Yamaha TTR 50 SUCK IT Posts: A lot.
|
Bang bang
__________________________________________________
I powdercoat stuff Help me pay for my addiction I say funny stuff. http://twitter.com/JustinPWNSyou sometimes... I write like a 12 year old too, http://justinpwnsyou.wordpress.com/ |
|
May 16th, 2013, 02:51 PM | #128 |
Certifiable nontundrum
Name: Harper
Location: NC Milkshake stand
Join Date: Mar 2013 Motorcycle(s): 2013 SE NINJA 300 Posts: Too much.
MOTM - Sep '13, Sep '16
|
Can someone print me a 300 cowl? An a printer... Yup a printer
|
|
May 16th, 2013, 03:20 PM | #129 |
ninjette.org certified postwhore
Name: Al
Location: York, Pa
Join Date: Dec 2012 Motorcycle(s): 2013 Ninja 300..............2008 Ninja 500-sold...2009 Ninja 250-Crashed Posts: Too much.
MOTM - Sep '14
|
I have a 30 year old LaMachine 1 and about 2 years ago the spacer thingy that keeps the slicer at the top of the doohickey was broken by my nephew. They stopped making that part (I know, hard to believe so soon). It is like 2 inches long, easy right?
|
|
May 16th, 2013, 03:42 PM | #130 |
ninjette.org member
Name: drac
Location: VA
Join Date: Mar 2012 Motorcycle(s): '88 Hurricane 600, '09 Ninja 250 Posts: 237
|
what was the cost to make that thing?
__________________________________________________
While no trees were harmed in making this post, a large number of electrons were severely inconvenienced. |
|
May 16th, 2013, 03:46 PM | #131 | |
ninjette.org member
Name: drac
Location: VA
Join Date: Mar 2012 Motorcycle(s): '88 Hurricane 600, '09 Ninja 250 Posts: 237
|
Quote:
Sounds painful, but good luck with that.................
__________________________________________________
While no trees were harmed in making this post, a large number of electrons were severely inconvenienced. |
|
|
May 16th, 2013, 06:24 PM | #132 |
ninjette.org certified postwhore
Name: Jason
Location: Norfolk, VA
Join Date: Dec 2011 Motorcycle(s): 2012 EX250, 2014 EX300 Posts: A lot.
|
The bed and extruder is aluminum, it'll handle the heat just fine.
It'll work for well enough for small prints but large ones might get warped
__________________________________________________
Ethioknight Memorial Fund- Sticker sale http://www.ninjette.org/forums/showthread.php?t=111700 |
|
May 20th, 2013, 11:22 AM | #133 |
Bass Master General
|
If anyone's interested in things other than guns
I got my printer working, only for a few days now, I need to dial it in, but it's churning out very usable parts now. Please excuse the quality, crappy iPad camera. EDIT: My next step is to model a Garmin Nuvi mount, I am thinking above the dials below the windscreen, design it so it wedges in and can be secured by a single bolt through the windscreen. |
|
May 20th, 2013, 11:28 AM | #134 | |
ninjette.org certified postwhore
Name: Jason
Location: Norfolk, VA
Join Date: Dec 2011 Motorcycle(s): 2012 EX250, 2014 EX300 Posts: A lot.
|
Quote:
can you print me out a 40' tall gundam and 20 ozs of silver please.
__________________________________________________
Ethioknight Memorial Fund- Sticker sale http://www.ninjette.org/forums/showthread.php?t=111700 |
|
|
May 20th, 2013, 11:43 AM | #135 |
ninjette.org certified postwhore
Name: Al
Location: York, Pa
Join Date: Dec 2012 Motorcycle(s): 2013 Ninja 300..............2008 Ninja 500-sold...2009 Ninja 250-Crashed Posts: Too much.
MOTM - Sep '14
|
Is this something you can print?
|
|
May 20th, 2013, 11:50 AM | #137 |
Bass Master General
|
|
|
May 20th, 2013, 11:50 AM | #138 |
ninjette.org certified postwhore
Name: Al
Location: York, Pa
Join Date: Dec 2012 Motorcycle(s): 2013 Ninja 300..............2008 Ninja 500-sold...2009 Ninja 250-Crashed Posts: Too much.
MOTM - Sep '14
|
it is a spacer and I do not have a 3d file.
Do you know how I could go about looking for a 3d file? edit: on that web page it said THIS ITEM HAS BEEN SOLD |
|
May 20th, 2013, 12:14 PM | #139 |
Bass Master General
|
Wouldn't let me see if it had been sold or not beacuse i'm not 'merkin.
You would need to make a 3D model of it, but if it comes in contact with food, a 3D printed part wouldn't be food safe due to micro holes and such on the surface that would trap food particles and bacteria. |
|
May 20th, 2013, 01:22 PM | #140 |
ninjette.org dude
Name: 1 guess :-)
Location: SF Bay Area
Join Date: Jun 2008 Motorcycle(s): '13 Ninja 300 (white, the fastest color!), '13 R1200RT, '14 CRF250L, '12 TT-R125LE Posts: Too much.
Blog Entries: 7
|
Looks sorta like this one still available on eBay, right?
http://www.ebay.com/itm/REGAL-LA-MAC...-/290918905757
__________________________________________________
Montgomery Street Motorcycle Club / cal24.com / crf250l.org / ninjette.org ninjette.org Terms of Service Shopping for motorcycle parts or equipment? Come here first. The friendliest Ninja 250R/300/400 forum on the internet! (especially Unregistered) |
|
May 20th, 2013, 01:42 PM | #141 |
Bass Master General
|
|
|
May 20th, 2013, 02:26 PM | #142 | |
ninjette.org certified postwhore
Name: Al
Location: York, Pa
Join Date: Dec 2012 Motorcycle(s): 2013 Ninja 300..............2008 Ninja 500-sold...2009 Ninja 250-Crashed Posts: Too much.
MOTM - Sep '14
|
Quote:
|
|
|
May 20th, 2013, 02:29 PM | #143 | |
Bass Master General
|
Quote:
|
|
|
May 20th, 2013, 02:30 PM | #144 | |
ninjette.org certified postwhore
Name: Al
Location: York, Pa
Join Date: Dec 2012 Motorcycle(s): 2013 Ninja 300..............2008 Ninja 500-sold...2009 Ninja 250-Crashed Posts: Too much.
MOTM - Sep '14
|
Quote:
|
|
|
May 20th, 2013, 02:31 PM | #145 |
ninjette.org dude
Name: 1 guess :-)
Location: SF Bay Area
Join Date: Jun 2008 Motorcycle(s): '13 Ninja 300 (white, the fastest color!), '13 R1200RT, '14 CRF250L, '12 TT-R125LE Posts: Too much.
Blog Entries: 7
|
I had no idea what you planned to use it for.
__________________________________________________
Montgomery Street Motorcycle Club / cal24.com / crf250l.org / ninjette.org ninjette.org Terms of Service Shopping for motorcycle parts or equipment? Come here first. The friendliest Ninja 250R/300/400 forum on the internet! (especially Unregistered) |
|
May 20th, 2013, 02:43 PM | #146 |
Certifiable nontundrum
Name: Harper
Location: NC Milkshake stand
Join Date: Mar 2013 Motorcycle(s): 2013 SE NINJA 300 Posts: Too much.
MOTM - Sep '13, Sep '16
|
Can I get a HOT TUB???
|
|
May 20th, 2013, 02:56 PM | #147 |
ninjette.org certified postwhore
Name: Al
Location: York, Pa
Join Date: Dec 2012 Motorcycle(s): 2013 Ninja 300..............2008 Ninja 500-sold...2009 Ninja 250-Crashed Posts: Too much.
MOTM - Sep '14
|
|
|
May 20th, 2013, 02:57 PM | #148 |
ninjette.org certified postwhore
Name: Jason
Location: Norfolk, VA
Join Date: Dec 2011 Motorcycle(s): 2012 EX250, 2014 EX300 Posts: A lot.
|
get a motel room
__________________________________________________
Ethioknight Memorial Fund- Sticker sale http://www.ninjette.org/forums/showthread.php?t=111700 |
|
May 20th, 2013, 02:58 PM | #149 | |
ninjette.org certified postwhore
Name: Al
Location: York, Pa
Join Date: Dec 2012 Motorcycle(s): 2013 Ninja 300..............2008 Ninja 500-sold...2009 Ninja 250-Crashed Posts: Too much.
MOTM - Sep '14
|
Quote:
no wait then I have one |
|
|
May 20th, 2013, 02:59 PM | #150 |
ninjette.org certified postwhore
Name: Al
Location: York, Pa
Join Date: Dec 2012 Motorcycle(s): 2013 Ninja 300..............2008 Ninja 500-sold...2009 Ninja 250-Crashed Posts: Too much.
MOTM - Sep '14
|
|
|
May 20th, 2013, 03:03 PM | #151 |
ninjette.org certified postwhore
Name: Jason
Location: Norfolk, VA
Join Date: Dec 2011 Motorcycle(s): 2012 EX250, 2014 EX300 Posts: A lot.
|
honestly its probably not very easy to print that piece without using a lot of supports, and the keyway looks like i has narrow tolerances.
to save on supports, you would have split it into two halves and glue or print it upside down.
__________________________________________________
Ethioknight Memorial Fund- Sticker sale http://www.ninjette.org/forums/showthread.php?t=111700 |
|
May 20th, 2013, 03:05 PM | #152 |
ninjette.org certified postwhore
Name: Al
Location: York, Pa
Join Date: Dec 2012 Motorcycle(s): 2013 Ninja 300..............2008 Ninja 500-sold...2009 Ninja 250-Crashed Posts: Too much.
MOTM - Sep '14
|
|
|
May 20th, 2013, 03:07 PM | #153 |
ninjette.org certified postwhore
Name: Jason
Location: Norfolk, VA
Join Date: Dec 2011 Motorcycle(s): 2012 EX250, 2014 EX300 Posts: A lot.
|
just buy it, dudes working on my gundam.
__________________________________________________
Ethioknight Memorial Fund- Sticker sale http://www.ninjette.org/forums/showthread.php?t=111700 |
|
May 20th, 2013, 03:10 PM | #154 |
ninjette.org certified postwhore
Name: Al
Location: York, Pa
Join Date: Dec 2012 Motorcycle(s): 2013 Ninja 300..............2008 Ninja 500-sold...2009 Ninja 250-Crashed Posts: Too much.
MOTM - Sep '14
|
|
|
May 20th, 2013, 03:14 PM | #155 |
ninjette.org certified postwhore
Name: Jason
Location: Norfolk, VA
Join Date: Dec 2011 Motorcycle(s): 2012 EX250, 2014 EX300 Posts: A lot.
|
you keep pushing something that makes as much sense to produce with this process as a humanoid robot. except you can purchase a factory version of your part for not much money. yea yous trolling.
__________________________________________________
Ethioknight Memorial Fund- Sticker sale http://www.ninjette.org/forums/showthread.php?t=111700 |
|
May 20th, 2013, 03:24 PM | #157 | |
ninjette.org certified postwhore
Name: Al
Location: York, Pa
Join Date: Dec 2012 Motorcycle(s): 2013 Ninja 300..............2008 Ninja 500-sold...2009 Ninja 250-Crashed Posts: Too much.
MOTM - Sep '14
|
Quote:
It is a intricate part and I was not sure what a printer was able to do. Making it in two pieces is likely how it was originally made. Now please go away and stop your tolling. |
|
|
May 20th, 2013, 03:26 PM | #158 |
ninjette.org certified postwhore
Name: Jason
Location: Norfolk, VA
Join Date: Dec 2011 Motorcycle(s): 2012 EX250, 2014 EX300 Posts: A lot.
|
thats why i asked if he wanted a motel room, lol.
__________________________________________________
Ethioknight Memorial Fund- Sticker sale http://www.ninjette.org/forums/showthread.php?t=111700 |
|
May 20th, 2013, 03:28 PM | #159 | |
ninjette.org certified postwhore
Name: Jason
Location: Norfolk, VA
Join Date: Dec 2011 Motorcycle(s): 2012 EX250, 2014 EX300 Posts: A lot.
|
Quote:
but it won't be $2, when you factor time, machine wear, programming, and assembly, shipping, and tolerance checks. not trolling just being real
__________________________________________________
Ethioknight Memorial Fund- Sticker sale http://www.ninjette.org/forums/showthread.php?t=111700 Last futzed with by lgk; May 20th, 2013 at 03:30 PM. Reason: forgot to add shipping costs |
|
|
May 20th, 2013, 03:29 PM | #160 |
ninjette.org certified postwhore
Name: Al
Location: York, Pa
Join Date: Dec 2012 Motorcycle(s): 2013 Ninja 300..............2008 Ninja 500-sold...2009 Ninja 250-Crashed Posts: Too much.
MOTM - Sep '14
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
3d printing moto parts | alex.s | Off-Topic | 38 | November 12th, 2014 07:49 AM |
Shapeways 3d printing | eddiekay | General Motorcycling Discussion | 8 | July 17th, 2014 08:33 PM |
water transfer printing, pretty cool | subxero | Videos | 4 | April 15th, 2014 02:22 AM |
Printing new gauge faces? | CZroe | 2008 - 2012 Ninja 250R Farkles | 7 | May 10th, 2012 12:55 PM |
[superbikeplanet.com] - Under A Dozen Cagiva Prints Left. Re-Printing Not Scheduled U | Ninjette Newsbot | Motorcycling News | 0 | April 28th, 2009 11:00 AM |
|
|