July 23rd, 2013, 10:11 AM | #241 |
ninjette.org member
Name: Carlos
Location: Puerto Rico
Join Date: Jan 2013 Motorcycle(s): Ninja 300R Posts: 181
|
i install my system today and those stock pipes looks like a straw compare to the area p system. it really awaken the bike now with the tuner and the full system. i will upload a video later in the day for you to see
thanks again kerry for ur hard work |
|
July 23rd, 2013, 11:36 AM | #242 |
Finding some curves....
Name: Thomas
Location: Hurst,Texas
Join Date: Sep 2012 Motorcycle(s): 2013 300 Ninja Posts: 268
|
|
|
July 23rd, 2013, 01:28 PM | #243 |
ninjette.org certified postwhore
Name: Al
Location: York, Pa
Join Date: Dec 2012 Motorcycle(s): 2013 Ninja 300..............2008 Ninja 500-sold...2009 Ninja 250-Crashed Posts: Too much.
MOTM - Sep '14
|
|
|
July 23rd, 2013, 08:12 PM | #244 |
Finding some curves....
Name: Thomas
Location: Hurst,Texas
Join Date: Sep 2012 Motorcycle(s): 2013 300 Ninja Posts: 268
|
I got my exhaust installed tonight and my... my... my.... its a sweet sounding note I have to say. The bike went from lawn mower to a real motorcycle.
I have heard the slip-ons and other full exhausts and this Area P exhaust sounds the best by far. Area P has exceeded my expectations at this point. The only other thing that would put me over the edge is to be the group by winner hint.... hint... LOL.............. Anyway ...... this is an outstanding product. Thank you Kerry and all the people who put time into making such a good product at Area P. |
|
July 27th, 2013, 12:17 PM | #245 |
ninjette.org member
Name: Steve
Location: Oswego, NY
Join Date: Aug 2012 Motorcycle(s): 2013 White 300 Posts: 221
|
Got mine today! It is beautiful. Can't wait to install it tomorrow.
Holy crap you guys package the hell out of these. I had to dig into my toolbox just to get everything out and unwrapped. |
|
July 27th, 2013, 12:32 PM | #246 |
ninjette.org certified postwhore
Name: Al
Location: York, Pa
Join Date: Dec 2012 Motorcycle(s): 2013 Ninja 300..............2008 Ninja 500-sold...2009 Ninja 250-Crashed Posts: Too much.
MOTM - Sep '14
|
I just got mine also. Opened a bottle of wine and reading the installation instructions.
|
|
July 28th, 2013, 03:14 PM | #247 |
ninjette.org member
Name: Steve
Location: Oswego, NY
Join Date: Aug 2012 Motorcycle(s): 2013 White 300 Posts: 221
|
|
|
July 29th, 2013, 12:07 PM | #248 |
ninjette.org member
Name: Wes
Location: Tampa, FL
Join Date: Mar 2013 Motorcycle(s): Kawasaki Ninja 300 Posts: 30
|
|
|
July 29th, 2013, 12:53 PM | #249 |
Que Buenos Son!!!
Name: Ryan
Location: Grovetucky, OH
Join Date: Jun 2012 Motorcycle(s): Aprilia Shiver 750, Husaberg FE 450, Ninja 300 (sold), xr100 Posts: A lot.
MOTM - Nov '14
|
Mine backfires a little, but I definetely wouldn't call it nasty.
__________________________________________________
Don't do something because it's easy,.. Do it because it's not! If you aren't going forward, then you're falling behind. "Drive it like you stole it"!!! |
|
July 29th, 2013, 12:57 PM | #250 |
ninjette.org member
Name: Wes
Location: Tampa, FL
Join Date: Mar 2013 Motorcycle(s): Kawasaki Ninja 300 Posts: 30
|
Unless by nasty you mean --> NASTY!
|
|
July 29th, 2013, 01:17 PM | #251 |
ninjette.org member
Name: Steve
Location: Oswego, NY
Join Date: Aug 2012 Motorcycle(s): 2013 White 300 Posts: 221
|
Oh I love the sound of it and the looks I get, I just don't want to damage anything.
|
|
July 29th, 2013, 02:22 PM | #252 |
Que Buenos Son!!!
Name: Ryan
Location: Grovetucky, OH
Join Date: Jun 2012 Motorcycle(s): Aprilia Shiver 750, Husaberg FE 450, Ninja 300 (sold), xr100 Posts: A lot.
MOTM - Nov '14
|
A little bit of back fire won't hurt anything. Did you remove your intake snorkel?
__________________________________________________
Don't do something because it's easy,.. Do it because it's not! If you aren't going forward, then you're falling behind. "Drive it like you stole it"!!! |
|
July 29th, 2013, 02:24 PM | #253 |
ninjette.org member
Name: Steve
Location: Oswego, NY
Join Date: Aug 2012 Motorcycle(s): 2013 White 300 Posts: 221
|
|
|
July 29th, 2013, 02:25 PM | #254 |
ninjette.org member
Name: Wes
Location: Tampa, FL
Join Date: Mar 2013 Motorcycle(s): Kawasaki Ninja 300 Posts: 30
|
|
|
July 29th, 2013, 03:47 PM | #255 |
ninjette.org member
Name: Wes
Location: Tampa, FL
Join Date: Mar 2013 Motorcycle(s): Kawasaki Ninja 300 Posts: 30
|
One question, when you guys are selecting your tune, are you just going by the tiny little triangle? Is the another indication?
|
|
July 29th, 2013, 04:26 PM | #256 |
ninjette.org member
Name: Steve
Location: Oswego, NY
Join Date: Aug 2012 Motorcycle(s): 2013 White 300 Posts: 221
|
|
|
July 29th, 2013, 11:57 PM | #257 |
ninjette.org guru
Name: David
Location: Lafayette, CA
Join Date: May 2010 Motorcycle(s): 2009 Ninja 250R, 2013 Ninja 300 Posts: 279
|
Got my exhaust a day early. My install took a long while because all my aftermarket but love it. Great exhaust Kerry
|
|
July 30th, 2013, 05:51 AM | #258 |
Area P
Name: Kerry
Location: SoCal & South Florida
Join Date: Dec 2008 Motorcycle(s): Too many to list Posts: 439
|
|
|
July 30th, 2013, 05:52 AM | #259 |
Area P
Name: Kerry
Location: SoCal & South Florida
Join Date: Dec 2008 Motorcycle(s): Too many to list Posts: 439
|
|
|
July 30th, 2013, 01:36 PM | #260 |
ninjette.org guru
Name: David
Location: Lafayette, CA
Join Date: May 2010 Motorcycle(s): 2009 Ninja 250R, 2013 Ninja 300 Posts: 279
|
|
|
July 31st, 2013, 06:25 PM | #261 |
ninjette.org member
Name: Joel
Location: Bellingham, wa
Join Date: Mar 2012 Motorcycle(s): 2017 Motus MSTR (Kara), 1990 Ninja 600R (ZX600C3) (Scrappy) Posts: 185
|
*Timid mumble* I finally got enough money to buy a Ninja 300...
If I set my computer clock to March 30th, and post in this thread; can I make the group buy cut off time? |
1 out of 1 members found this post helpful. |
July 31st, 2013, 06:35 PM | #262 |
ninjette.org member
Name: Wes
Location: Tampa, FL
Join Date: Mar 2013 Motorcycle(s): Kawasaki Ninja 300 Posts: 30
|
Well, the reason I ask is that now that I have installed my exhaust it's time for me to switch over to the map catered to the exhaust and snorkel delete. It seems that the only indication of the current mapping is the tiny arrow on the plastic screw that changes maps. I didn't know if maybe the LED flashed a certain pattern on startup to indicate position or something else similar just to be sure.
|
|
August 1st, 2013, 08:51 AM | #263 | |
Area P
Name: Kerry
Location: SoCal & South Florida
Join Date: Dec 2008 Motorcycle(s): Too many to list Posts: 439
|
Quote:
The Dial detent on the unit faceplate is very "subtle" when changing map positions. If you are unsure of what position you are actually on, simply go into the software and confirm the selected map position and map number that was pre-loaded for you. Your unit had two maps pre-loaded for you. Position 1 = Map #3 - Stock Position 2 = Map #7 - Ultra High Mount If you have any questions or need assistance, simply contact us and we'll be happy to help. |
|
|
August 3rd, 2013, 07:38 PM | #265 |
The Violet Vixen
Name: Yakaru
Location: Issaquah, WA & Las Vegas, NV
Join Date: Jun 2012 Motorcycle(s): Perigee (250), Hotaru (250), Saturn (300), Pearl (300), Zero (S1000RR), Chibi (Z125), Xellos ('18 HP4R) Posts: A lot.
MOTM - Jun '16
|
Got the exhaust setup today on mine (finally) -- haven't had a chance to wind her up though -- still need to do my airbox and install the controller.
What's the ETA on the drawing, by the by? |
|
August 3rd, 2013, 08:12 PM | #266 |
ninjette.org dude
Name: 1 guess :-)
Location: SF Bay Area
Join Date: Jun 2008 Motorcycle(s): '13 Ninja 300 (white, the fastest color!), '13 R1200RT, '14 CRF250L, '12 TT-R125LE Posts: Too much.
Blog Entries: 7
|
ETA is short! If I can get the little monsters to sit still long enough, I think we can hold a drawing tomorrow. Should be fun!
__________________________________________________
Montgomery Street Motorcycle Club / cal24.com / crf250l.org / ninjette.org ninjette.org Terms of Service Shopping for motorcycle parts or equipment? Come here first. The friendliest Ninja 250R/300/400 forum on the internet! (especially Unregistered) |
|
August 4th, 2013, 07:47 PM | #267 |
The Violet Vixen
Name: Yakaru
Location: Issaquah, WA & Las Vegas, NV
Join Date: Jun 2012 Motorcycle(s): Perigee (250), Hotaru (250), Saturn (300), Pearl (300), Zero (S1000RR), Chibi (Z125), Xellos ('18 HP4R) Posts: A lot.
MOTM - Jun '16
|
I'm very nearly done! Pulled the airbox, blocked off the KLEEN air system, pulled all the Cali exhaust stuff off, installed the FuelMoto controller, made sure I didn't have a check engine light, and the exhaust is installed.
Having two issues though: 1. the provided 'spacer' bolt heads are so small that they actually slip /through/ the fairing. If I use the OEM screw it puts my fairing right up on the pipe. Anyone else have this issue? 2. There is a slight odor after revving her that I'm not expecting, and some weird hesitation. This is PROBABLY because my tuner isn't loaded with the Pod Filter setup. I've PMed Kerry about that and will look into it again in the morning (easily could be my own screwup too) |
|
August 4th, 2013, 07:49 PM | #268 | |
ninjette.org member
Name: Carlos
Location: Puerto Rico
Join Date: Jan 2013 Motorcycle(s): Ninja 300R Posts: 181
|
Quote:
|
|
|
August 4th, 2013, 07:50 PM | #269 |
The Violet Vixen
Name: Yakaru
Location: Issaquah, WA & Las Vegas, NV
Join Date: Jun 2012 Motorcycle(s): Perigee (250), Hotaru (250), Saturn (300), Pearl (300), Zero (S1000RR), Chibi (Z125), Xellos ('18 HP4R) Posts: A lot.
MOTM - Jun '16
|
hmm, let me go check -- IIRC I only got 1 washer and figured it was just a packaging error; but it may be 2 stuck together.
|
|
August 4th, 2013, 07:53 PM | #270 |
ninjette.org member
Name: Carlos
Location: Puerto Rico
Join Date: Jan 2013 Motorcycle(s): Ninja 300R Posts: 181
|
Not the washer that came with the exhaust , i am talking about the oem washer that looks like a spacer so the bolt doesnt go thru the fairing...
|
|
August 5th, 2013, 05:32 AM | #271 | |
Area P
Name: Kerry
Location: SoCal & South Florida
Join Date: Dec 2008 Motorcycle(s): Too many to list Posts: 439
|
Quote:
1. As Felo pointed out several times - you simply use the oem shouldered/sleeved bushing with the new longer screws supplied. 2. As noted on your invoice, the Map pre-loaded on your unit was for the mods indicated at that time which was: stock airbox, snorkel removed, K&N panel filter. If you have removed the airbox and installed Pod Filters, this requires a very different Map. Simply contact us and we'll be happy to send it to you. Anything else you need assistance on, simply let us know. |
|
|
August 5th, 2013, 09:31 AM | #272 | |
The Violet Vixen
Name: Yakaru
Location: Issaquah, WA & Las Vegas, NV
Join Date: Jun 2012 Motorcycle(s): Perigee (250), Hotaru (250), Saturn (300), Pearl (300), Zero (S1000RR), Chibi (Z125), Xellos ('18 HP4R) Posts: A lot.
MOTM - Jun '16
|
Quote:
The sleeves did the job just fine, fairings are now attached and the system looks great And I'm looking forward to the map and then giving the system a spin. |
|
|
August 6th, 2013, 11:29 AM | #273 |
ninjette.org dude
Name: 1 guess :-)
Location: SF Bay Area
Join Date: Jun 2008 Motorcycle(s): '13 Ninja 300 (white, the fastest color!), '13 R1200RT, '14 CRF250L, '12 TT-R125LE Posts: Too much.
Blog Entries: 7
|
Alright sports fans, this capable group of (young) motorcyclists has helped out by conducting the drawing for the free system. The video is loading as we speak, so I'm not going to give away the details until we all can see the drawing as it happens... (and also, so the suspense builds. )
__________________________________________________
Montgomery Street Motorcycle Club / cal24.com / crf250l.org / ninjette.org ninjette.org Terms of Service Shopping for motorcycle parts or equipment? Come here first. The friendliest Ninja 250R/300/400 forum on the internet! (especially Unregistered) |
|
August 6th, 2013, 11:54 AM | #274 |
ninjette.org member
Name: Wes
Location: Tampa, FL
Join Date: Mar 2013 Motorcycle(s): Kawasaki Ninja 300 Posts: 30
|
|
|
August 6th, 2013, 12:45 PM | #275 |
ninjette.org dude
Name: 1 guess :-)
Location: SF Bay Area
Join Date: Jun 2008 Motorcycle(s): '13 Ninja 300 (white, the fastest color!), '13 R1200RT, '14 CRF250L, '12 TT-R125LE Posts: Too much.
Blog Entries: 7
|
__________________________________________________
Montgomery Street Motorcycle Club / cal24.com / crf250l.org / ninjette.org ninjette.org Terms of Service Shopping for motorcycle parts or equipment? Come here first. The friendliest Ninja 250R/300/400 forum on the internet! (especially Unregistered) |
|
August 6th, 2013, 01:32 PM | #276 |
Area P
Name: Kerry
Location: SoCal & South Florida
Join Date: Dec 2008 Motorcycle(s): Too many to list Posts: 439
|
|
|
August 6th, 2013, 01:35 PM | #277 |
ninjette.org member
Name: Carlos
Location: Puerto Rico
Join Date: Jan 2013 Motorcycle(s): Ninja 300R Posts: 181
|
|
|
August 6th, 2013, 05:14 PM | #278 |
ninjette.org dude
Name: 1 guess :-)
Location: SF Bay Area
Join Date: Jun 2008 Motorcycle(s): '13 Ninja 300 (white, the fastest color!), '13 R1200RT, '14 CRF250L, '12 TT-R125LE Posts: Too much.
Blog Entries: 7
|
__________________________________________________
Montgomery Street Motorcycle Club / cal24.com / crf250l.org / ninjette.org ninjette.org Terms of Service Shopping for motorcycle parts or equipment? Come here first. The friendliest Ninja 250R/300/400 forum on the internet! (especially Unregistered) |
|
August 6th, 2013, 05:19 PM | #279 |
ninjette.org dude
Name: 1 guess :-)
Location: SF Bay Area
Join Date: Jun 2008 Motorcycle(s): '13 Ninja 300 (white, the fastest color!), '13 R1200RT, '14 CRF250L, '12 TT-R125LE Posts: Too much.
Blog Entries: 7
|
__________________________________________________
Montgomery Street Motorcycle Club / cal24.com / crf250l.org / ninjette.org ninjette.org Terms of Service Shopping for motorcycle parts or equipment? Come here first. The friendliest Ninja 250R/300/400 forum on the internet! (especially Unregistered) |
1 out of 1 members found this post helpful. |
August 6th, 2013, 05:19 PM | #280 |
ninjette.org dude
Name: 1 guess :-)
Location: SF Bay Area
Join Date: Jun 2008 Motorcycle(s): '13 Ninja 300 (white, the fastest color!), '13 R1200RT, '14 CRF250L, '12 TT-R125LE Posts: Too much.
Blog Entries: 7
|
__________________________________________________
Montgomery Street Motorcycle Club / cal24.com / crf250l.org / ninjette.org ninjette.org Terms of Service Shopping for motorcycle parts or equipment? Come here first. The friendliest Ninja 250R/300/400 forum on the internet! (especially Unregistered) |
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
SF Bay Area Ninjetters invited for FE/fun runs 9/27-9/30 | greenaero | Ride Reports | 15 | September 28th, 2013 04:29 PM |
Area P - GB (for the new-gen 250!) Runs through February 28. | kbryant | Motorcycle-related | 239 | May 1st, 2013 04:42 PM |
SoCal: Azusa/GMR Monday March 9 and Tuesday March 10. | Ken | Ride Reports | 23 | March 10th, 2009 06:12 AM |
|
|