September 9th, 2013, 08:28 PM | #1 |
ninjette.org member
Name: dean
Location: L-town
Join Date: Oct 2012 Motorcycle(s): 99 honda rebel/ 04 ninjette Posts: 42
|
Normal operating temp
I know the ninjette's are famous for being cold blooded, but I'm new to them and was wondering what the normal operating temp is? Also, what temp is considered overheating on these bikes?
|
|
September 9th, 2013, 09:09 PM | #3 |
ninjette.org member
Name: dean
Location: L-town
Join Date: Oct 2012 Motorcycle(s): 99 honda rebel/ 04 ninjette Posts: 42
|
So if 200 is the normal operating temp, what is the overheat temp? 215? 225?
|
|
September 9th, 2013, 09:15 PM | #4 |
Certified looney toon
Name: Teri
Location: 39°52'40.7"N 118°23'53.8"W (Northern NV)
Join Date: Jun 2012 Motorcycle(s): 2012 Ninja 250, 102k+ miles -- 2014 CB500X, 42k+ miles Posts: A lot.
Blog Entries: 16
MOTM Jul '13, Jul '14
|
I think I just read the fan kicks on at 220*, but not entirely sure if that is accurate or if that applies to only one or both the generations. I'm trying to get my newgen hot enough to run the fan but gave up.
__________________________________________________
<-- Linky Hey Unregistered! The code [you] shows the username currently logged in. IBA # 56020 AMA # 521481 Fun Rides! ][ My Videos ][ My Gear Hold yourself to the same rules you expect others to follow. |
|
September 9th, 2013, 10:05 PM | #5 |
Fix It Till Ya Break It
Name: Asspyre
Location: T.Dot
Join Date: Oct 2011 Motorcycle(s): 08 250RRrrrr Posts: 623
|
Fan comes on at 210 for me on my temp gauge
|
|
September 10th, 2013, 06:16 AM | #6 | |
Daily Ninjette rider
Name: Hernan
Location: Florida
Join Date: Mar 2011 Motorcycle(s): 2007 Ninja 250 Posts: A lot.
MOTY - 2016, MOTM - Dec '12, Jan '14, Jan '15, May '16
|
Quote:
The combustion chamber has the highest. Open throttle means higher pressure and temps. High rpms at low speed overloads the cooling system. http://faq.ninja250.org/wiki/Cooling_system The cool blood is due to the mix being regulated by the manufacturer on the lean side in order to comply with EPA restrictions. When carburetor's and head's metal parts are cool, the vaporized gasoline in the mix condenses over those, making the mix reaching the combustion chamber way too lean.
__________________________________________________
Motofool .................................Never ride faster than your guardian angel can fly "Mankind is composed of two sorts of men — those who love and create, and those who hate and destroy. Love is the bond between men, the way to teach and the center of the world." - José Martí |
|
|
September 10th, 2013, 09:57 AM | #7 |
-
Name: -
Location: -
Join Date: May 2009 Motorcycle(s): - Posts: A lot.
|
The legendary cold-bloodedness of many of Kawasaki's motorcycles (why they run so cold in cold weather) is due to the overly-simple design of their cooling systems. In a lot of their lower-end models Kawasaki has chosen to use a very rudimentary plumbing. And besides running too cold in cold weather this type of cooling system causes some rather negative effects on the engine's thermal characteristics and this affects its efficiency and longevity.
One person in particular who has done research on this situation is Bill at watt-man.com He's the guy who has developed the Thermo-Bob modification that can be used to fix the cooling system shortfalls in several Kawasaki models. Here's his analysis of what's going on in one of Kawasaki's cooling systems (a KLR 650 which has the same cooling system plumbing as the EX-250): http://www.watt-man.com/uploads/TB_Testing.pdf I don't know if you have the interest and patience to read and understand what Bill is demonstrating in this PDF file, but it pretty well explains the dynamics of the EX-250's cooling system and the shortfalls and drawbacks to such a design. |
|
September 10th, 2013, 05:48 PM | #8 |
ninjette.org member
Name: ninja
Location: LAND OF OZ
Join Date: Sep 2012 Motorcycle(s): 2002 ninja 250 Posts: 100
|
Should have a temp. gauge
|
|
September 11th, 2013, 12:59 AM | #9 |
ninjette.org member
Name: dean
Location: L-town
Join Date: Oct 2012 Motorcycle(s): 99 honda rebel/ 04 ninjette Posts: 42
|
Wow!! Thanks for the info guys. I really appreciate it. I'm just getting the bike back on the road so this is greatly appreciated.
|
|
September 11th, 2013, 06:20 AM | #10 | |
not an actual panda
Name: dan
Location: philadelphia
Join Date: Aug 2012 Motorcycle(s): 2008 Ninja 250, 2009 CBR600RR (Sold) Posts: A lot.
|
Quote:
|
|
|
September 11th, 2013, 08:20 AM | #11 |
-
Name: -
Location: -
Join Date: May 2009 Motorcycle(s): - Posts: A lot.
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Koso Oil Temp Sensor Adapter & Water Temp Sensor Adapter | StaylorT | 2008 - 2012 Ninja 250R Tech Talk | 10 | January 24th, 2014 12:38 AM |
What is the normal operating engine temperature? | arnoldc6 | 2008 - 2012 Ninja 250R Tech Talk | 16 | February 21st, 2013 01:30 AM |
oil temp vs coolant temp | cuong-nutz | General Motorcycling Discussion | 11 | January 23rd, 2013 05:44 PM |
[roadracingworld.com] - Zero Motorcycles Names Wharton Chief Operating Officer | Ninjette Newsbot | Motorcycling News | 0 | February 26th, 2011 10:10 AM |
Operating temp. question | JCCJMM_ | 1986 - 2007 Ninja 250R Tech Talk | 6 | September 30th, 2010 07:39 AM |
|
|