WTS - 2009 Ninja 250R part out. 19k miles, in running condition.

[PHMCS]

Hey all.
Looking to sell some of the parts I have left over from a 2009 Ninja 250R.
Bike had 19,157miles on the odo, no smoke/oil/fluid issues, ran well. Bike was last ridden about 1.5 months ago. I did an additional 170ish miles of riding on it after purchase with no issues before pulling it apart.

The listed prices are open to negotiation, so if you really feel a price is too high, feel free to make an offer, I am likely more than willing to work with you. Shipping not included in prices unless otherwise noted. Can do Local sales in the Arkansas region if needed. If you are interested, please feel free to send me a PM with questions or to make an offer. Pictures of all parts are available, just ask. VIN can also be supplied if anyone is worried about stolen/iffy parts sources. Items will be removed from list as they are sold, but feel free to ask about anything not here. I may have it, in addition to some used pre-gen parts.

Will accept Paypal, USPS money order (no third party MO), or Cash for local buyers. Shipping prices will be as close to actual cost as possible. I'm not into gouging people for shipping.

Prices/Stock updated as of 8/5/14 - Thanks everyone so far for the interest and purchases!
------------------------------------------------------------------------
Engine/Cooling
-Complete Engine w starter and Transmission. Fully functional, 19k miles. No noticeable rod knock, oil consumption, coolant loss during test rides. $475.00 Local Pickup. Can potentially ship if absolutely needed, will be pricey due to freight charges.
-Front Sprocket cover: Great condition, light scratching. $10.00 + shipping
-Carburetor Assy, complete with choke. Fully functioning during last ride, but could likely benefit from a good cleaning. Includes carb -> head boots.: $85.00 + shipping
-Airbox with snorkel and -> Carb Boots. Complete, undamaged. Could use cleaning: $20.00 + shipping
-Coolant Reservoir Tank. No damage. $5.00+ shipping.
-Radiator and cooling fan. Excellent condition, no visible corrosion. Combo Set $35.00 + shipping
-Thermostat. No issues, zero corrosion. Comes with coolant temp sensor. $10.00 + shipping
-Exhaust Manifold. Great condition, no cracks, visible dings, or heavy rust. $35.00 + shipping (large item)
-Clutch Cable. $10.00 Shipped.

Electrical
-Full wiring Harness, uncut. Splices in front and rear turn signal lines from PO. All connectors present, everything worked at time of removal. $15.00 + shipping
-Voltage Regulator. Good as new. $10.00 + shipping
-Gauge Cluster Assy. All gauges functional, some smudging under fuel level glass. All mounting points good. No damage. Can supply Speedo Cable if needed. $75.00 + shipping.
-Upper engine mount brackets (Also functions as a mount for the ignition coils). No Damage. $10.00 + shipping (heavy)
-Ignition Coils w/ Sparkplug cap. set $20.00 + shipping

Body/Frame
-Main Seat - Excellent condition! $15.00 + Shipping.
-Rear Fender Assy, undertray panel, no tail light. Good condition, no damage aside from some wear on the clips that hold the tail light lid on. $10.00 + shipping
-Left Clip on with choke controls, handlebar, bar-end, Lighting controls, and clutch cable/lever. $35.00 + shipping
-Right Clip on with kill switch, handlebar, throttle assy, throttle cables. (no master cyl or brake lever) some light scratches on bar end: $30.00 + shipping
-Complete Frame. Bike was crashed but had a clear title, did not show any handling issues during test rides, and there isn't any noticeable damage. Has not been checked on any laser alignment rig, so no promises that its to the degree accurate. Once fully stripped, will need to be crated and freighted unless buyer can pick up Locally. $300.00 + freight and packing.

[MrSavvy]

No idea if you have any of these, but I'm looking for;
Ignition/upper triple tree, gas cap, rear seat lock, with matched key/s.
Front wheel fender.
Let me know, thanks bud.

[PHMCS]

pm sent

[PHMCS]

Updating main post via reply as it won't let me edit any longer. (hope no problems with that? I can make a new post if preferred) List is now current as of 8/23/14. If you see a part you are interested in, (or don't see it), let me know what you are looking to pay and we can work out a price.

Can do Local sales in the Arkansas region if needed. If you are interested, please feel free to send me a PM with questions or to make an offer. Pictures of all parts are available, just ask. VIN can also be supplied if anyone is worried about stolen/iffy parts sources. Items will be removed from list as they are sold, but feel free to ask about anything not here. I may have it, in addition to some used pre-gen parts.

Will accept Paypal, USPS money order (no third party MO), or Cash for local buyers. Shipping prices will be as close to actual cost as possible. I'm not into gouging people for shipping.
------------------------------------------------------------------------
Updated 9/24/14

Engine/Cooling
-Complete Engine w starter and Transmission. Fully functional, 19k miles. No noticeable rod knock, oil consumption, coolant loss during test rides.Local Pickup. Can potentially ship if absolutely needed, will be pricey due to freight charges.
-Front Sprocket cover: Great condition, light scratching.
-Airbox with snorkel and -> Carb Boots. Complete, undamaged. Could use cleaning:
-Coolant Reservoir Tank. No damage.
-Radiator and cooling fan. Excellent condition, no visible corrosion. Combo Set.
-Thermostat. No issues, zero corrosion. Comes with coolant temp sensor.

Electrical
-Electrical kill switch from Right clip on.
-Lighting control/choke switch from left clip-on.
-Full wiring Harness, uncut. Splices in front and rear turn signal lines from PO. All connectors present, everything worked at time of removal.
-Gauge Cluster Assy. All gauges functional, some smudging under fuel level glass. All mounting points good. No damage. Includes gauge-side harness. Can supply Speedo Cable if needed.

Body/Frame/Controls
-OEM throttle tube w/ grip. Appears to be in perfect shape.
-Battery Tray. Good condition. No damage.
-OEM horn assembly.
-seat bracket with fuse assy (seat not included)
-Front upper fairing stay. Dent on left side turn signal mount. Otherwise excellent condition.
-Upper engine mount brackets (Also functions as a mount for the ignition coils). No Damage.
-Clutch Cable.
-Throttle cables.
-Clutch lever perch.
-Rear Fender Assy, undertray panel, no tail light. Good condition, no damage aside from some wear on the clips that hold the tail light lid on.
-Left handlebar. item has some bend to it, some crash damage.
-Complete Frame. Bike was crashed but had a clear title, did not show any handling issues during test rides, and there isn't any noticeable damage. Has not been checked on any laser alignment rig. prefer local buyer or pick up as freight will be costly.

[Insane Pie]

Do you have the front fairing stay?

[PHMCS]

Another repost due to losing ability to edit old entry. List is now current as of 10/22/14. If you see a part you are interested in, (or don't see it), let me know what you are looking to pay via PM and we can work out a price.

Can do Local sales in the Arkansas region if needed. If you are interested, please feel free to send me a PM with questions or to make an offer. Pictures of all parts are available, just ask. VIN can also be supplied if anyone is worried about stolen/iffy parts sources. Items will be removed from list as they are sold, but feel free to ask about anything not here. I may have it, in addition to some used pre-gen parts.

Will accept Paypal, USPS money order (no third party MO), or Cash for local buyers. Shipping prices will be as close to actual cost as possible. I'm not into gouging people for shipping.
------------------------------------------------------------------------
Updated 11/5/14

Engine/Cooling
-Complete Engine w starter and Transmission. Fully functional, 19k miles. No noticeable rod knock, oil consumption, coolant loss during test rides. Local Pickup. Can potentially ship if absolutely needed, will be pricey due to freight charges.
-Front Sprocket cover: Great condition, light scratching.
-Rear sprocket: pretty well worn, some surface rust.
-Airbox with snorkel and -> Carb Boots. Complete, undamaged. Could use cleaning:
-Coolant Reservoir Tank. No damage.
-Radiator and cooling fan. Excellent condition, no visible corrosion. Combo Set.
-Thermostat. No issues, zero corrosion. Comes with coolant temp sensor.

Electrical
-Electrical kill switch from Right clip on.
-Lighting control/choke switch from left clip-on.
-Ignition switch

Body/Frame/Controls
-Front wheel fender w under fender metal frame assy. some scratching and a bit of rash on corner but overall good shape.
-OEM throttle tube w/ grip. Appears to be in perfect shape.
-Battery Tray. Good condition. No damage.
-OEM horn assembly.
-fuel tank bracket
-seat bracket with fuse assy (seat not included)
-Upper engine mount brackets (Also functions as a mount for the ignition coils). No Damage.
-Clutch Cable.
-Throttle cables.
-Clutch lever perch.
-Rear Fender Assy, undertray panel, no tail light. Good condition, no damage aside from some wear on the clips that hold the tail light lid on.
-Left handlebar. item has some bend to it, some crash damage.
-Complete Frame. Bike was crashed but had a clear title, did not show any handling issues during test rides, and there isn't any noticeable damage. Has not been checked on any laser alignment rig. prefer local buyer or pick up as freight will be

--EX-F series parts
-07 Gauge cluster with housing. fully functional, but harness to frame is cut.
-07 rear shock and spring. great condition. approx 12k miles.
-07 rear brake caliper w/ master cylinder. Appears to be in good condition, but have not tested.

[Sirref]

any chance you still have the following:
rear swingarm assembly including wheel (tire condition doesn't matter)
front end (forks/triple tree/wheel/brakes/etc)

[PHMCS]

Sorry, none of the front or rear suspension components like those mentioned are available. There is a rear brake rotor, but I wouldn't consider it useable as there is a pretty deep groove (>1mm deep and about 5mm wide) worn into the inside rotor face from a misaligned pad that was never seen to.

[Gamma1]

Looking for the front fender brace and maybe the plastic rear fender Assy.
If you have I'll PM you my email for some pics.

Thanks.

[PHMCS]

I do have the front fender brace, the rear fender, and the rear under-tray, all in great condition. I will PM you later tonight with more information and picture links.