New to me track bike - 2009 ZX6R - Page 2

lowcel · February 15th, 2015, 12:13 PM

Just added some decals to the lower fairing.

lowcel · February 15th, 2015, 12:14 PM

Oh, I also sent these things off to Thermosman to be serviced.

Jason5885 · February 25th, 2015, 10:05 AM

You appear to be rich. lol

lowcel · February 25th, 2015, 02:31 PM

Quote:

Originally Posted by Jason5885

You appear to be rich. lol

I can only dream of being rich. Closest I get to being rich is setting beside @csmith12 at the race track.

csmith12 · February 25th, 2015, 02:43 PM

^^^^ lol

Ballin' on a budget. hahahahahah

lowcel · March 6th, 2015, 03:32 PM

Getting a little closer to being ready every day.

I know that most stickers add hp, these stickers subtract seconds off of lap times.

No more being the loud guy in the paddocks. Can't believe @csmith12 made me spend so much money.

A little extra bling is always nice.

]

After changing my tires last weekend I got tired of screwing up the finish on my wheels. This is terrible.

So I purchased a no scuff mount / demount bar.

I then modified my bead breaker to give a place to get leverage to use the bar. All it took was some all thread, a few nuts, a couple of washers, and a piece of PVC.

Last but not least I picked up some new oil for the bike. Hopefully I will get a chance to change it this weekend.

csmith12 · March 6th, 2015, 03:38 PM

You will enjoy that genny yo. The first time you need to run a little heater in your trailer... sheeet mang... Run the genny outside and the heater inside and still get a good nights sleep, you will know your $$$ was well spent.

lowcel · March 9th, 2015, 04:14 PM

Looks like it is just about ready to go. All I have left to do is put the front number plate and number on it. I also ordered some new foot pegs and some new rubbers for the shifters and brake levers.

I have to say, I love my new pit bull stands.

Sirref · March 9th, 2015, 04:39 PM

where'd the badass ninja sticker go?

you're inspiring me to paint my gixxer and make it look all perfect

lowcel · March 9th, 2015, 04:45 PM

Quote:

Originally Posted by Sirref

where'd the badass ninja sticker go?

you're inspiring me to paint my gixxer and make it look all perfect

The bad ass ninja sticker didn't make the cut.

Sirref · March 9th, 2015, 04:47 PM

aww, and here I was thinking it was going to be on the top of the tank or something

lowcel · March 25th, 2015, 04:22 PM

Well I finally had the chance to ride my new toy. I love it! Now if I could just remember how to ride I would be set.

February 15th, 2015, 12:13 PM	#41
lowcel ninjette.org member Name: Bruce Location: Charleston, WV Join Date: Aug 2014 Motorcycle(s): 2013 ZX6R and a 2009 ZX6R Posts: 148	Just added some decals to the lower fairing.
	1 out of 1 members found this post helpful.

February 25th, 2015, 02:43 PM	#45
csmith12 The Corner Whisperer Name: Chris (aka Reactor) Location: Northern KY Join Date: May 2011 Motorcycle(s): 2010 250 (track), 1992 250, 2006 R6 (street/track), 2008 R6 (track) Posts: Too much. MOTY 2015, MOTM - Nov '12, Nov '13	^^^^ lol Ballin' on a budget. hahahahahah __________________________________________________ Goal: Shake A Million Hands \| Look through the corners \| Track Day Prep \| Closest track? \| The Mid-Ohio School

March 6th, 2015, 03:32 PM	#46
lowcel ninjette.org member Name: Bruce Location: Charleston, WV Join Date: Aug 2014 Motorcycle(s): 2013 ZX6R and a 2009 ZX6R Posts: 148	Getting a little closer to being ready every day. I know that most stickers add hp, these stickers subtract seconds off of lap times. No more being the loud guy in the paddocks. Can't believe @csmith12 made me spend so much money. A little extra bling is always nice. ] After changing my tires last weekend I got tired of screwing up the finish on my wheels. This is terrible. So I purchased a no scuff mount / demount bar. I then modified my bead breaker to give a place to get leverage to use the bar. All it took was some all thread, a few nuts, a couple of washers, and a piece of PVC. Last but not least I picked up some new oil for the bike. Hopefully I will get a chance to change it this weekend.
	2 out of 2 members found this post helpful.

March 6th, 2015, 03:38 PM	#47
csmith12 The Corner Whisperer Name: Chris (aka Reactor) Location: Northern KY Join Date: May 2011 Motorcycle(s): 2010 250 (track), 1992 250, 2006 R6 (street/track), 2008 R6 (track) Posts: Too much. MOTY 2015, MOTM - Nov '12, Nov '13	You will enjoy that genny yo. The first time you need to run a little heater in your trailer... sheeet mang... Run the genny outside and the heater inside and still get a good nights sleep, you will know your $$$ was well spent. __________________________________________________ Goal: Shake A Million Hands \| Look through the corners \| Track Day Prep \| Closest track? \| The Mid-Ohio School

March 9th, 2015, 04:39 PM	#49
Sirref Private Joker Name: Ben Location: Towson, MD Join Date: Nov 2012 Motorcycle(s): '99/'01 Ninja 250 "sketchy", '13 Ninja 300 "yoshi", '03 GSXR 600 "merlin" Posts: A lot. MOTM - Mar '14	where'd the badass ninja sticker go? you're inspiring me to paint my gixxer and make it look all perfect __________________________________________________ I see you over there seeing me, do you see the me I think you see?

February 15th, 2015, 12:14 PM	#42
lowcel ninjette.org member Name: Bruce Location: Charleston, WV Join Date: Aug 2014 Motorcycle(s): 2013 ZX6R and a 2009 ZX6R Posts: 148	Oh, I also sent these things off to Thermosman to be serviced.

February 25th, 2015, 10:05 AM	#43
Jason5885 ninjette.org member Name: Jason Location: Scotland Join Date: Nov 2014 Motorcycle(s): 2010 Kawasaki Ninja 250r FI Posts: 205 Blog Entries: 1	You appear to be rich. lol

March 9th, 2015, 04:14 PM	#48
lowcel ninjette.org member Name: Bruce Location: Charleston, WV Join Date: Aug 2014 Motorcycle(s): 2013 ZX6R and a 2009 ZX6R Posts: 148	Looks like it is just about ready to go. All I have left to do is put the front number plate and number on it. I also ordered some new foot pegs and some new rubbers for the shifters and brake levers. I have to say, I love my new pit bull stands.

March 9th, 2015, 04:47 PM	#51
Sirref Private Joker Name: Ben Location: Towson, MD Join Date: Nov 2012 Motorcycle(s): '99/'01 Ninja 250 "sketchy", '13 Ninja 300 "yoshi", '03 GSXR 600 "merlin" Posts: A lot. MOTM - Mar '14	aww, and here I was thinking it was going to be on the top of the tank or something __________________________________________________ I see you over there seeing me, do you see the me I think you see?

March 25th, 2015, 04:22 PM	#52
lowcel ninjette.org member Name: Bruce Location: Charleston, WV Join Date: Aug 2014 Motorcycle(s): 2013 ZX6R and a 2009 ZX6R Posts: 148	Well I finally had the chance to ride my new toy. I love it! Now if I could just remember how to ride I would be set.
	1 out of 1 members found this post helpful.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
FS 2009 250R Track Bike	Boosted139	Motorcycle-related	1	May 13th, 2014 06:57 AM
2009 Kawasaki Ninja 250 track bike	TnNinjaGirl	Motorcycle-related	3	April 1st, 2014 08:48 AM
[roadracingworld.com] - Bike Night, Bikini Contest, Stunt Show, Track Laps And Track	Ninjette Newsbot	Motorcycling News	0	September 6th, 2013 01:20 PM
WTB: 2008+ 250R salvage bike for track bike project	htdub	Items Wanted	0	April 25th, 2012 11:12 AM
Taking the ZX6R to the track....	austexjg	The Ex-Ninjetters Lair	21	April 20th, 2012 09:03 AM