'09 250r still only running with choke on.

AubreyGuad · April 5th, 2017, 10:22 AM

Ok guys. I am back again today. Yesterday I removed my carb again. This time, extra thorough. Turns out I did miss a couple of clogged jets that I missed in my previously cleaning. I blew through every orifice with carb clean and compressed air through the carb and all jets.

I go to reinstall the carb today. I am having the same issues. It dies after turning off the choke and/or touching the throttle. And when I touch the throttle, I ease it, so it is not like I am trying to hot rod it so to speak.

Anyways, I am stuck once again. Is it possible that I could have a fuel line swapped or backwards? There were a couple of lines I wasn't 100% sure about where they went. I just put them where they seemed to reach and fit. Any suggestions would be great.

Thanks.

(And I have also checked the boots from the carb to the head. They are good in shape.)

ducatiman · April 5th, 2017, 10:30 AM

i responded in your other thread.

April 5th, 2017, 10:22 AM	#1
AubreyGuad ninjette.org member Name: Aubrey Location: Birmingham Join Date: Apr 2017 Motorcycle(s): 2009 Ninja 250r Posts: 17	'09 250r still only running with choke on. Ok guys. I am back again today. Yesterday I removed my carb again. This time, extra thorough. Turns out I did miss a couple of clogged jets that I missed in my previously cleaning. I blew through every orifice with carb clean and compressed air through the carb and all jets. I go to reinstall the carb today. I am having the same issues. It dies after turning off the choke and/or touching the throttle. And when I touch the throttle, I ease it, so it is not like I am trying to hot rod it so to speak. Anyways, I am stuck once again. Is it possible that I could have a fuel line swapped or backwards? There were a couple of lines I wasn't 100% sure about where they went. I just put them where they seemed to reach and fit. Any suggestions would be great. Thanks. (And I have also checked the boots from the carb to the head. They are good in shape.)

April 5th, 2017, 10:30 AM	#2
ducatiman ninjette.org certified postwhore Name: Gordon Location: new york Join Date: Sep 2009 Motorcycle(s): '95 DUCATI 900SS/SP '07 DUCATI SS800 '19 HONDA CBR650R Posts: A lot. MOTM - Nov '18, Mar '17	i responded in your other thread. __________________________________________________ gordon@customcarbservices.com Custom Carb Service www.customcarbservices.com

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Having Idle issues, only running on choke..???	rubber duckie	1986 - 2007 Ninja 250R Tech Talk	10	May 14th, 2017 08:31 AM
Only runs with the choke on. '09 250r.	AubreyGuad	2008 - 2012 Ninja 250R Tech Talk	28	April 7th, 2017 07:00 AM
2009 250r won't run without choke	Bonereviver	2008 - 2012 Ninja 250R Tech Talk	8	February 3rd, 2014 08:00 PM
09 Ninja 250r wont stay idle without choke	TqAmsNy	2008 - 2012 Ninja 250R Tech Talk	11	March 20th, 2013 01:38 PM
Help!! Bike not running without choke	gaby	2008 - 2012 Ninja 250R Tech Talk	11	October 12th, 2011 07:15 PM