Number Plate Template

csmith12 · March 24th, 2014, 10:44 AM

Anyone got any number plate templates? I have a new gen 250 but if you got a pregen template, I will take that too.

Thanks!

csmith12 · April 4th, 2014, 12:43 PM

None?

Aodrn · April 4th, 2014, 03:22 PM

I just bought some spray paint. Pretty bikes suck.

csmith12 · April 4th, 2014, 03:31 PM

Quote:

Originally Posted by Aodrn

I just bought some spray paint. Pretty bikes suck.

lol, Not really trying to be pretty and all, I just wanna print them out and stick em on.

Paint? Aint nobody got time for dat.

iamjacob · April 4th, 2014, 03:39 PM

Where on the bike do you want the plate(s) ? Won't take but a couple of minutes to make one.

Zombiphone · April 4th, 2014, 03:40 PM

Templates? Club racers don't need no stinkin' templates

csmith12 · April 4th, 2014, 03:50 PM

Quote:

Originally Posted by iamjacob

Where on the bike do you want the plate(s) ? Won't take but a couple of minutes to make one.

Nothing special, where the headlight would be, and on the tail.

iamjacob · April 4th, 2014, 04:06 PM

I'll see if I can throw a couple together over the weekend.

rc-rick · April 4th, 2014, 09:50 PM

Quote:

Originally Posted by csmith12

Anyone got any number plate templates? I have a new gen 250 but if you got a pregen template, I will take that too.

Thanks!

With your track record at Putnam with MCRA, it better not be pretty. Lol

csmith12 · April 4th, 2014, 09:59 PM

Dang, tough crowd. So you run outta gas and crash one little time....

bwhahhahahaha See ya in a few weeks Rick!

rc-rick · April 4th, 2014, 10:12 PM

I did the same as you, but I spread mine out through the year.

We will be the LITTLE big show with MCRA, our grid is going to be huge! See ya in a few week.

csmith12 · April 5th, 2014, 08:51 AM

I heard the 250 grid was gunna be good sized.

Should be some good racing.

Quote:

Originally Posted by rc-rick

With your track record at Putnam with MCRA, it better not be pretty. Lol

And for "the record"....

I have 10+ track days with MCRA, ALL of them at Putnam.

4 run offs including one in the straight due to a guy looping it outta hot pit

1 outta gas
1 crash

It just was my rotten luck the gas/crash happened in the same day. Why?

csmith12 · April 18th, 2014, 05:42 AM

Packed and stacked! Leaving for Putnam late this afternoon.

Also, I did get a number plate template finally. We ended up making it. Unless the prints come in the mail today, I will have to use tape for a front plate. lol Oh well...

JohnnyBravo · April 18th, 2014, 09:56 AM

Don't they sell them at cycle gear?

csmith12 · April 18th, 2014, 10:26 AM

Quote:

Originally Posted by JohnnyBravo

Don't they sell them at cycle gear?

Sell what? Ended up making the template from scratch. With as many 250 racers on here seemed like a waist of time but meh. I will share what I got when I get back so the next person can just print em.

JohnnyBravo · April 18th, 2014, 10:43 AM

The racers around here change out there number plates when thy get back from cycle gear, so I figured cycle gear sold something to make them... Idk, look forward to see what you came up with

alex.s · April 18th, 2014, 11:09 AM

cyclegear sells vinyl numbers and vinyl backgrounds (they carry yellow and white at the one by me with black or white numbers) they also have plastic dirtbike numberplates.

JohnnyBravo · April 18th, 2014, 11:45 AM

csmith12 · April 18th, 2014, 12:12 PM

Quote:

Originally Posted by alex.s

cyclegear sells vinyl numbers and vinyl backgrounds (they carry yellow and white at the one by me with black or white numbers) they also have plastic dirtbike numberplates.

Quote for a online associate below.

Quote:

Unfortunately I would not have these available online or by phone, but our stores can special order thousands of items direct from our distributors. To place a special order you would need to visit the store in person, but if you contact them by phone they can check the availability for you. You can find all the contact information for our stores here: http://www.cyclegear.com/store-finder

Can you please hit me with a link?

alex.s · April 18th, 2014, 12:31 PM

weird. i can't find it on the website. i was in cyclegear about 2 or 3 weeks ago though and they had them when i was there then. i'll go in tomorrow and take photos as proof ;P

March 24th, 2014, 10:44 AM	#1
csmith12 The Corner Whisperer Name: Chris (aka Reactor) Location: Northern KY Join Date: May 2011 Motorcycle(s): 2010 250 (track), 1992 250, 2006 R6 (street/track), 2008 R6 (track) Posts: Too much. MOTY 2015, MOTM - Nov '12, Nov '13	Number Plate Template Anyone got any number plate templates? I have a new gen 250 but if you got a pregen template, I will take that too. Thanks! __________________________________________________ Goal: Shake A Million Hands \| Look through the corners \| Track Day Prep \| Closest track? \| The Mid-Ohio School

April 4th, 2014, 12:43 PM	#2
csmith12 The Corner Whisperer Name: Chris (aka Reactor) Location: Northern KY Join Date: May 2011 Motorcycle(s): 2010 250 (track), 1992 250, 2006 R6 (street/track), 2008 R6 (track) Posts: Too much. MOTY 2015, MOTM - Nov '12, Nov '13	None? __________________________________________________ Goal: Shake A Million Hands \| Look through the corners \| Track Day Prep \| Closest track? \| The Mid-Ohio School

April 4th, 2014, 03:22 PM	#3
Aodrn It's a long boring story Name: Ryan Location: St. Louis Join Date: Jul 2013 Motorcycle(s): 2012 Ninja 250 Posts: 167	I just bought some spray paint. Pretty bikes suck. __________________________________________________ #41 MCRA alex.s :crashing is a normal part of life... people are just in denial about that.

April 4th, 2014, 09:59 PM	#10
csmith12 The Corner Whisperer Name: Chris (aka Reactor) Location: Northern KY Join Date: May 2011 Motorcycle(s): 2010 250 (track), 1992 250, 2006 R6 (street/track), 2008 R6 (track) Posts: Too much. MOTY 2015, MOTM - Nov '12, Nov '13	Dang, tough crowd. So you run outta gas and crash one little time.... bwhahhahahaha See ya in a few weeks Rick! __________________________________________________ Goal: Shake A Million Hands \| Look through the corners \| Track Day Prep \| Closest track? \| The Mid-Ohio School

April 18th, 2014, 05:42 AM	#13
csmith12 The Corner Whisperer Name: Chris (aka Reactor) Location: Northern KY Join Date: May 2011 Motorcycle(s): 2010 250 (track), 1992 250, 2006 R6 (street/track), 2008 R6 (track) Posts: Too much. MOTY 2015, MOTM - Nov '12, Nov '13	Packed and stacked! Leaving for Putnam late this afternoon. Also, I did get a number plate template finally. We ended up making it. Unless the prints come in the mail today, I will have to use tape for a front plate. lol Oh well... __________________________________________________ Goal: Shake A Million Hands \| Look through the corners \| Track Day Prep \| Closest track? \| The Mid-Ohio School

April 4th, 2014, 03:39 PM	#5
iamjacob ninjette.org guru Name: Jacob Location: Stockton, CA Join Date: Dec 2013 Motorcycle(s): 2011 250R SE Posts: 326	Where on the bike do you want the plate(s) ? Won't take but a couple of minutes to make one.

April 4th, 2014, 04:06 PM	#8
iamjacob ninjette.org guru Name: Jacob Location: Stockton, CA Join Date: Dec 2013 Motorcycle(s): 2011 250R SE Posts: 326	I'll see if I can throw a couple together over the weekend.

April 4th, 2014, 10:12 PM	#11
rc-rick ninjette.org member Name: Rick Location: St Peters Join Date: Feb 2013 Motorcycle(s): '09 ZX6 (street), '04 RC51 (street/track), '08 Ninja 250 (race) Posts: 104	I did the same as you, but I spread mine out through the year. We will be the LITTLE big show with MCRA, our grid is going to be huge! See ya in a few week.

April 18th, 2014, 09:56 AM	#14
JohnnyBravo Certifiable nontundrum Name: Harper Location: NC Milkshake stand Join Date: Mar 2013 Motorcycle(s): 2013 SE NINJA 300 Posts: Too much. MOTM - Sep '13, Sep '16	Don't they sell them at cycle gear?

April 18th, 2014, 10:43 AM	#16
JohnnyBravo Certifiable nontundrum Name: Harper Location: NC Milkshake stand Join Date: Mar 2013 Motorcycle(s): 2013 SE NINJA 300 Posts: Too much. MOTM - Sep '13, Sep '16	The racers around here change out there number plates when thy get back from cycle gear, so I figured cycle gear sold something to make them... Idk, look forward to see what you came up with

April 18th, 2014, 11:09 AM	#17
alex.s wat Name: wat Location: tustin/long beach Join Date: Sep 2009 Motorcycle(s): wat Posts: Too much. Blog Entries: 5 MOTM - Oct '12, Feb '14	cyclegear sells vinyl numbers and vinyl backgrounds (they carry yellow and white at the one by me with black or white numbers) they also have plastic dirtbike numberplates. __________________________________________________

April 18th, 2014, 11:45 AM	#18
JohnnyBravo Certifiable nontundrum Name: Harper Location: NC Milkshake stand Join Date: Mar 2013 Motorcycle(s): 2013 SE NINJA 300 Posts: Too much. MOTM - Sep '13, Sep '16

April 18th, 2014, 12:31 PM	#20
alex.s wat Name: wat Location: tustin/long beach Join Date: Sep 2009 Motorcycle(s): wat Posts: Too much. Blog Entries: 5 MOTM - Oct '12, Feb '14	weird. i can't find it on the website. i was in cyclegear about 2 or 3 weeks ago though and they had them when i was there then. i'll go in tomorrow and take photos as proof ;P __________________________________________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[visordown.com] - Number plate flies off and embeds in bike behind	Ninjette Newsbot	Motorcycling News	0	October 9th, 2014 06:40 AM
[visordown.com] - Number plate flies off and spears following bike	Ninjette Newsbot	Motorcycling News	0	October 9th, 2014 03:50 AM
[visordown.com] - Can I have a small number plate	Ninjette Newsbot	Motorcycling News	0	January 23rd, 2014 03:00 PM
[motorcyclistonline] - Air Fence Auction - Hayden Number Plate	Ninjette Newsbot	Motorcycling News	0	September 8th, 2010 07:10 PM
[superbikeplanet.com] - Mladin To Run Number One Plate At New Jersey	Ninjette Newsbot	Motorcycling News	0	August 22nd, 2009 12:00 PM