|
June 18th, 2011, 07:13 PM
|
#1 |
|
The Corner Whisperer
Name: Chris (aka Reactor)
Location: Northern KY
Join Date: May 2011 Motorcycle(s): 2010 250 (track), 1992 250, 2006 R6 (street/track), 2008 R6 (track) Posts: Too much.
MOTY 2015, MOTM - Nov '12, Nov '13
|
Air filter missing?
All,
I am working on my pregen some. It needs some TLC. Does anyone have any pics of the air filter and how its installed? I don’t have any manual for my 91. I searched but didn’t find any pics. From what I can see, there is no filter at all on the bike currently. Should you be able to see it by removing the seat? Thanks
__________________________________________________
Goal: Shake A Million Hands | Look through the corners | Track Day Prep | Closest track? | The Mid-Ohio School |
|
|
|
June 19th, 2011, 08:00 AM
|
#2 |
|
The Corner Whisperer
Name: Chris (aka Reactor)
Location: Northern KY
Join Date: May 2011 Motorcycle(s): 2010 250 (track), 1992 250, 2006 R6 (street/track), 2008 R6 (track) Posts: Too much.
MOTY 2015, MOTM - Nov '12, Nov '13
|
Thanks kkim, extremely helpful as you would expect.
 It was as I thought, missing the filter & element holder. Which leads to my next question on this. If I were to buy this http://www.xdcycle.com/discount-moto...ir-Filter.html Would I still need the element holder? It looks as if I would not need it. Just slide into hole, strap down and done. Is this correct? Feel free to point me in the direction of a preferred filter (cheaper would be nice.).
__________________________________________________
Goal: Shake A Million Hands | Look through the corners | Track Day Prep | Closest track? | The Mid-Ohio School |
|
|
|
|
June 19th, 2011, 11:31 AM
|
#3 |
|
Join Date: Nov 2008 Posts: Too much.
|
sorry, this is the best I can do.
http://faq.ninja250.org/wiki/Which_a...e_Ninja_250%3F perhaps someone who actually owns a pregen can help you more. 
|
|
|
|
|
June 19th, 2011, 04:13 PM
|
#4 |
|
ninjette.org certified postwhore
Name: .
Location: .
Join Date: Feb 2011 Motorcycle(s): . Posts: Too much.
MOTM - Feb '13, Feb '14
|
is that K+N supposed to slide over the tubes on the airbox lid or something? If it slides over the tubes of the airbox lid then you shouldn't need the filter holder.
If this is the drop in filter that ninja250.org talks about in kkims link, I see why they say its a pain. |
|
|
|
|
June 20th, 2011, 12:16 PM
|
#5 |
|
The Corner Whisperer
Name: Chris (aka Reactor)
Location: Northern KY
Join Date: May 2011 Motorcycle(s): 2010 250 (track), 1992 250, 2006 R6 (street/track), 2008 R6 (track) Posts: Too much.
MOTY 2015, MOTM - Nov '12, Nov '13
|
That is what I am trying to figure out. I don't want to buy what I don't need.
__________________________________________________
Goal: Shake A Million Hands | Look through the corners | Track Day Prep | Closest track? | The Mid-Ohio School |
|
|
|
 |
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| K&N air filter to stock air box | Graugaard | 2008 - 2012 Ninja 250R Tech Talk | 29 | July 28th, 2012 06:33 AM |
| Anyone know an air filter I can replace the OEM filter with? | Monkeytofu | 1986 - 2007 Ninja 250R Tech Talk | 5 | July 22nd, 2012 09:34 AM |
| Missing Filter Spring!!! | AmplexorJ | 1986 - 2007 Ninja 250R Tech Talk | 4 | February 11th, 2012 10:52 PM |
| Oil filter change - missing parts | HorizonXP | 2008 - 2012 Ninja 250R Tech Talk | 12 | August 29th, 2010 09:26 PM |
| Missing oil filter washer | JokerSeven | 2008 - 2012 Ninja 250R Tech Talk | 2 | February 21st, 2010 07:23 PM |
|
|
