May 18th, 2024, 08:05 PM | #1 |
ninjette.org newbie
Name: Eric
Location: Tucson, AZ
Join Date: Jul 2022 Motorcycle(s): 2006 EX250F Posts: 9
|
High and Hanging Idle
After about 7 months of sitting around, I finally built up the courage to put some gas in my bike and see how it started. To my surprise (and after a lot of cranking) it finally shot to life and could sustain itself at idle.
While that's all great, I'm having an issue where the lowest I can get it to idle is around 1800 to 2100 RPM. My idle screw is no longer in contact with the throttle body (idk the technical term for that little springy guy on the carbs) and even then I'm still running high. I've also noticed after revving up the engine, the idle will slowly drop and tend to stick around 5 or 6k. I thought it might be a throttle cable issue, but the cables feel loose when I mess with the throttle. I was thinking it could be a mixture screw issue, but I'm not sure if I should increase or decrease the fuel ratio. I've got many more issues with this beauty, but I figured this might be something the gurus have seen before. I'd appreciate any advice |
|
May 19th, 2024, 04:50 AM | #2 |
ninjette.org certified postwhore
Name: Gordon
Location: new york
Join Date: Sep 2009 Motorcycle(s): '95 DUCATI 900SS/SP '07 DUCATI SS800 '19 HONDA CBR650R Posts: A lot.
MOTM - Nov '18, Mar '17
|
synch issue, IMHO
__________________________________________________
gordon@customcarbservices.com Custom Carb Service www.customcarbservices.com |
|
May 19th, 2024, 06:18 AM | #3 |
Guy Who Enjoys Riding
Name: Jim
Location: North Carolina
Join Date: Jul 2016 Motorcycle(s): Ninja 250 Posts: A lot.
MOTM - Oct '18, Aug '17, Aug '16
|
After looking into what ducatiman suggested, another possibility is air leaks between the carburetors and engine.
|
|
May 19th, 2024, 11:21 AM | #4 |
ninjette.org certified postwhore
Name: Gordon
Location: new york
Join Date: Sep 2009 Motorcycle(s): '95 DUCATI 900SS/SP '07 DUCATI SS800 '19 HONDA CBR650R Posts: A lot.
MOTM - Nov '18, Mar '17
|
certainly could be a cause for synch issues
__________________________________________________
gordon@customcarbservices.com Custom Carb Service www.customcarbservices.com |
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Slight hanging idle question. | Fatherof2 | 2008 - 2012 Ninja 250R Tech Talk | 2 | July 18th, 2022 07:25 AM |
Hanging idle and dies with throttle? | gitter | 2008 - 2012 Ninja 250R Tech Talk | 30 | November 9th, 2017 08:32 AM |
Idle High, Adjuster All the Way Down | Speedy3 | 2013 - 2017 Ninja 300 General Discussion | 2 | May 22nd, 2017 08:48 AM |
Idle - too high | ninja_sleeper | 2008 - 2012 Ninja 250R Tech Talk | 26 | August 30th, 2011 06:11 PM |
Hanging Idle | ak_907_ak | 2008 - 2012 Ninja 250R Tech Talk | 33 | June 14th, 2009 08:31 PM |
|
|