Getting a new chain and sprocket

kittyslasher · December 8th, 2013, 12:52 AM

I'm in need of a new chain and sprocket and found this kit online
http://www.amazon.com/D-I-D-DKK-013-...h+Sprocket+Kit

I was curious if it would work and if so how good of quality it is. I've heard did is good quality. It doesn't say in the name if its an X chain but mentions it in the description. If this i no good then will someone point me in the direction of a kit that doesn't cost an arm and a leg?

Alex · December 8th, 2013, 01:03 AM

I think it would work fine. You can get the chain specs by looking at DID's site, and the 520VX2 is going to be overkill for the 250 (i.e. it should last a good long while if taken care of).

kittyslasher · December 8th, 2013, 01:22 AM

Quote:

Originally Posted by Alex

I think it would work fine. You can get the chain specs by looking at DID's site, and the 520VX2 is going to be overkill for the 250 (i.e. it should last a good long while if taken care of).

Thanks Alex. You think its a good deal for the chain and sprockets or could i find better? Also i've heard mention of getting a 525 chain should i look for one of them or stick with a 520?

tfkrocks · December 8th, 2013, 02:39 AM

Quote:

Originally Posted by kittyslasher

Thanks Alex. You think its a good deal for the chain and sprockets or could i find better? Also i've heard mention of getting a 525 chain should i look for one of them or stick with a 520?

Heavier chains are preferred for more powerful bikes, but 520 is more than enough for the little ninjette.

Motofool · December 8th, 2013, 09:11 AM

http://chain-guide.com/applications/...cle-chain.html

It seems that this kit doesn't include the connecting link.

Use safety wire if you use a clip-type.

Take a look at these other options:
Checking e-bay for a Chain and Sprocket Kit 2008-2012 Kawasaki Ninja 250R

kittyslasher · December 8th, 2013, 10:53 AM

Quote:

Originally Posted by Motofool

http://chain-guide.com/applications/...cle-chain.html

It seems that this kit doesn't include the connecting link.

Use safety wire if you use a clip-type.

Take a look at these other options:
Checking e-bay for a Chain and Sprocket Kit 2008-2012 Kawasaki Ninja 250R

Yeah I don't know much about chains so when you talk about clip type I'm not sure what you mean. Can't I just buy a master link?

csmith12 · December 8th, 2013, 11:17 AM

Quote:

Originally Posted by kittyslasher

Yeah I don't know much about chains so when you talk about clip type I'm not sure what you mean. Can't I just buy a master link?

Your new chain should come with a master link. I will be one of 2 types, rivet or clip. If the master link is rivet type, you just press it on and go. If the master link is held onto place by a clip, safety wire it. After loosing so many clips, I stopped using them all together and just started safety wiring the master links and tossing the clip. ie as pictured below.

kittyslasher · December 8th, 2013, 11:31 AM

Quote:

Originally Posted by csmith12

Your new chain should come with a master link. I will be one of 2 types, rivet or clip. If the master link is rivet type, you just press it on and go. If the master link is held onto place by a clip, safety wire it. After loosing so many clips, I stopped using them all together and just started safety wiring the master links and tossing the clip. ie as pictured below.

Yeah in the picture It doesnt show a connector so I may have to purchase one seperate.

csmith12 · December 8th, 2013, 11:42 AM

Unlikely, I have never seen a new DID chain sold without a master. Should be rivet type in that kit as well.

Motofool · December 8th, 2013, 01:48 PM

Quote:

Originally Posted by kittyslasher

Yeah I don't know much about chains so when you talk about clip type I'm not sure what you mean. Can't I just buy a master link?

Please, read this article:
http://faq.ninja250.org/wiki/What_re..._I_consider%3F

Yes, you can buy a master link only for around $8.

kittyslasher · December 9th, 2013, 12:55 AM

Quote:

Originally Posted by csmith12

Unlikely, I have never seen a new DID chain sold without a master. Should be rivet type in that kit as well.

I went ahead and purchased it. Worst case ill get a master link if it doesn't come with one. Thanks everyone

December 8th, 2013, 12:52 AM	#1
kittyslasher ninjette.org member Name: David Location: Indio, Ca Join Date: Apr 2013 Motorcycle(s): Ninja 250 Posts: 87	Getting a new chain and sprocket I'm in need of a new chain and sprocket and found this kit online http://www.amazon.com/D-I-D-DKK-013-...h+Sprocket+Kit I was curious if it would work and if so how good of quality it is. I've heard did is good quality. It doesn't say in the name if its an X chain but mentions it in the description. If this i no good then will someone point me in the direction of a kit that doesn't cost an arm and a leg?

December 8th, 2013, 01:03 AM	#2
Alex ninjette.org dude Name: 1 guess :-) Location: SF Bay Area Join Date: Jun 2008 Motorcycle(s): '13 Ninja 300 (white, the fastest color!), '13 R1200RT, '14 CRF250L, '12 TT-R125LE Posts: Too much. Blog Entries: 7	I think it would work fine. You can get the chain specs by looking at DID's site, and the 520VX2 is going to be overkill for the 250 (i.e. it should last a good long while if taken care of). __________________________________________________ Montgomery Street Motorcycle Club / cal24.com / crf250l.org / ninjette.org ninjette.org Terms of Service Shopping for motorcycle parts or equipment? Come here first. The friendliest Ninja 250R/300/400 forum on the internet! (especially Unregistered)
	1 out of 1 members found this post helpful.

December 8th, 2013, 09:11 AM	#5
Motofool Daily Ninjette rider Name: Hernan Location: Florida Join Date: Mar 2011 Motorcycle(s): 2007 Ninja 250 Posts: A lot. MOTY - 2016, MOTM - Dec '12, Jan '14, Jan '15, May '16	http://chain-guide.com/applications/...cle-chain.html It seems that this kit doesn't include the connecting link. Use safety wire if you use a clip-type. Take a look at these other options: Checking e-bay for a Chain and Sprocket Kit 2008-2012 Kawasaki Ninja 250R __________________________________________________ *Motofool* *.................................Never ride faster than your guardian angel can fly* "Mankind is composed of two sorts of men — those who love and create, and those who hate and destroy. Love is the bond between men, the way to teach and the center of the world." - José Martí

December 8th, 2013, 11:42 AM	#9
csmith12 The Corner Whisperer Name: Chris (aka Reactor) Location: Northern KY Join Date: May 2011 Motorcycle(s): 2010 250 (track), 1992 250, 2006 R6 (street/track), 2008 R6 (track) Posts: Too much. MOTY 2015, MOTM - Nov '12, Nov '13	Unlikely, I have never seen a new DID chain sold without a master. Should be rivet type in that kit as well. __________________________________________________ Goal: Shake A Million Hands \| Look through the corners \| Track Day Prep \| Closest track? \| The Mid-Ohio School

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Chain and sprocket question	Baron	2008 - 2012 Ninja 250R Tech Talk	12	July 11th, 2014 01:35 PM
Chain and Sprocket Question	RandomPhantom	2008 - 2012 Ninja 250R Tech Talk	6	February 25th, 2014 01:44 AM
Need Help with chain or sprocket problem.	Trubin	2008 - 2012 Ninja 250R Tech Talk	10	November 25th, 2013 11:27 PM
Chain/Sprocket Questions	Red250R	2008 - 2012 Ninja 250R Tech Talk	11	May 7th, 2013 04:01 PM
54-60t sprocket and chain	ninja250	Items Wanted	2	July 26th, 2011 07:29 PM