DIY exhaust hanger, real nice!!

subxero · April 13th, 2014, 07:24 PM

So i wanted to lose my pillion pegs but i needed an exhaust hanger obviously.

So after looking for aftermarket and had a good chuckle at the fact they they are $80 or more for a little piece of metal

I figured ill just play with mine a bit. if i mess it up to bad, i can always buy a new oem peg/hanger on ebay for a few bucks.

So pretty simple here, take hanger off, disassemble peg section, i used a hack saw (real hi tech) to cut off whatever i felt like, spray painted the bare pieces real quick, literally just held it and sprayed it, wiped off collateral damage and this is what i ended up with, which is if i remember correctly 13oz lighter than the stock piece

For basically a little bit of time and effort out of my right arm to work the hack saw i am pretty happy with how it ended up. Better than paying $80 + and i didn't need to buy any pieces parts

FREE, ZIP, ZILCH, NADA

csmith12 · April 13th, 2014, 08:55 PM

rasta · April 14th, 2014, 09:38 AM

That looks good

I got this one for $50. But it's mainly because the bracket that the passenger pegs connected to got bent, so I could only bolt to one side.

http://www.slingshotracing.net/catal...ket-p-167.html

subxero · April 14th, 2014, 11:23 AM

^yeah i seen those ones but again couldn't bring myself to pay that, for that.
I thought about fabricating my own but figured hacking the OEM was cheaper and easier and it would match/flow better with the bike.

ill get some more/better pics up sooner or later, maybe this weekend or Friday.

April 13th, 2014, 08:55 PM	#2
csmith12 The Corner Whisperer Name: Chris (aka Reactor) Location: Northern KY Join Date: May 2011 Motorcycle(s): 2010 250 (track), 1992 250, 2006 R6 (street/track), 2008 R6 (track) Posts: Too much. MOTY 2015, MOTM - Nov '12, Nov '13	__________________________________________________ Goal: Shake A Million Hands \| Look through the corners \| Track Day Prep \| Closest track? \| The Mid-Ohio School

April 14th, 2014, 09:38 AM	#3
rasta Your face Name: Wes Location: SF Bay Area Join Date: Jul 2013 Motorcycle(s): 2014 Honda CBR650f Posts: A lot.	That looks good I got this one for $50. But it's mainly because the bracket that the passenger pegs connected to got bent, so I could only bolt to one side. http://www.slingshotracing.net/catal...ket-p-167.html __________________________________________________ "even a proper fitting helmet can 'get loose'" -csmith

April 14th, 2014, 11:23 AM	#4
subxero dirty boy Name: Joe Location: Johnstown, PA Join Date: Sep 2012 Motorcycle(s): I don't even know anymore?? Posts: A lot. MOTM - Apr '14	^yeah i seen those ones but again couldn't bring myself to pay that, for that. I thought about fabricating my own but figured hacking the OEM was cheaper and easier and it would match/flow better with the bike. ill get some more/better pics up sooner or later, maybe this weekend or Friday. __________________________________________________ I love the smell of burning pre-mix in the morning I don't think I'm a lot dumber than you thought that I think that I thought I was once.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DIY: Exhaust Hanger (no welding)	Shift250R	2008 - 2012 Ninja 250R Tech Talk	31	January 12th, 2013 08:09 PM
DIY- Installing Zartan's Exhaust Hanger	kkim	2008 - 2012 Ninja 250R Farkles	45	April 26th, 2011 06:43 PM
DIY- AP Exhaust Hanger	kkim	2008 - 2012 Ninja 250R Farkles	12	June 18th, 2010 12:39 PM
DIY: Evotech Exhaust Hanger	schneider_11	2008 - 2012 Ninja 250R Farkles	7	May 22nd, 2010 01:42 PM
exhaust hanger	mista350z	2008 - 2012 Ninja 250R Farkles	5	April 13th, 2009 10:41 AM