|
October 2nd, 2014, 09:54 AM
|
#1 |
|
ninjette.org sage
Name: Kevin
Location: Portland, OR
Join Date: Oct 2013 Motorcycle(s): Ninja 250R, Tiger 800 XRT Posts: 828
|
Idle Strangeness
When I come to a stop after riding along and fully warmed-up, choke off, the engine idles at around 1k or maybe slightly less, and sounds a bit rough. If I then blip it just a touch, it settles at an idle of 1500, and then is pretty ok, varies maybe +-50 RPM.
If I do further blips while stopped, it goes right back to 1500, no hangs or dips, although every once in a while it'll dip and come back up when I blip it. Only occasionally though, usually it's right back to 1500. Any ideas what could be causing this? I rejetted after putting on a new Area P pipe, and it seems to run well through all the gears, just this small issue at idle. Mixture screws are 2.75 turns out with stock pilot jets. |
|
|
|
October 6th, 2014, 09:50 PM
|
#2 |
|
The Corner Whisperer
Name: Chris (aka Reactor)
Location: Northern KY
Join Date: May 2011 Motorcycle(s): 2010 250 (track), 1992 250, 2006 R6 (street/track), 2008 R6 (track) Posts: Too much.
MOTY 2015, MOTM - Nov '12, Nov '13
|
hmmmm...
__________________________________________________
Goal: Shake A Million Hands | Look through the corners | Track Day Prep | Closest track? | The Mid-Ohio School |
|
|
|
|
October 11th, 2014, 06:07 PM
|
#3 |
|
ninjette.org dude
Name: 1 guess :-)
Location: SF Bay Area
Join Date: Jun 2008 Motorcycle(s): '13 Ninja 300 (white, the fastest color!), '13 R1200RT, '14 CRF250L, '12 TT-R125LE Posts: Too much.
Blog Entries: 7
|
hmmmmm......
__________________________________________________
Montgomery Street Motorcycle Club / cal24.com / crf250l.org / ninjette.org ninjette.org Terms of Service Shopping for motorcycle parts or equipment? Come here first. The friendliest Ninja 250R/300/400 forum on the internet! (especially Unregistered) |
|
|
|
|
October 11th, 2014, 06:52 PM
|
#4 |
|
Rev Limiter
Name: Jay
Location: WI
Join Date: Jul 2013 Motorcycle(s): '06 SV650n, '00 Derbi GPR, '64 CA77 Dream 305, '70 CL450 Scrambler, numerous dirt bikes Posts: A lot.
MOTM - Jun '18, Oct '16
|
Maybe one of the carb slides not seating completely?
Have they been synced lately? |
|
|
|
|
October 12th, 2014, 11:28 AM
|
#5 |
|
ninjette.org sage
Name: Kevin
Location: Portland, OR
Join Date: Oct 2013 Motorcycle(s): Ninja 250R, Tiger 800 XRT Posts: 828
|
I just synced the carbs. The slides seemed fine when I was doing the jetting. Are there any cables or things in their vicinity that might be blocking them?
|
|
|
|
|
June 2nd, 2015, 01:32 PM
|
#6 |
|
ninjette.org newbie
Name: Steve
Location: Sacramento
Join Date: Oct 2013 Motorcycle(s): 1966 Ducati 160 Posts: 3
|
Did you ever solve this problem? I'm experiencing similar issue with similar setup.
|
|
|
|
|
June 2nd, 2015, 01:41 PM
|
#7 |
|
ninjette.org sage
Name: Kevin
Location: Portland, OR
Join Date: Oct 2013 Motorcycle(s): Ninja 250R, Tiger 800 XRT Posts: 828
|
No, it still does it sometimes, though it seems to be less than it used to. Perhaps because the weather is warmer now. It runs fine otherwise so I'm not worrying about it.
|
|
|
|
|
June 3rd, 2015, 06:15 AM
|
#8 |
|
ninjette.org newbie
Name: Steve
Location: Sacramento
Join Date: Oct 2013 Motorcycle(s): 1966 Ducati 160 Posts: 3
|
Okay, thanks.
|
|
|
|
 |
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Idle issues - Idle is different every time I start up. | 106 | 1986 - 2007 Ninja 250R Tech Talk | 6 | November 13th, 2014 04:57 PM |
| idle issues | jgcable | 1986 - 2007 Ninja 250R Tech Talk | 9 | July 30th, 2014 03:13 PM |
| Idle is all wonky | MisterLu | 2008 - 2012 Ninja 250R Tech Talk | 4 | July 29th, 2014 03:23 AM |
| what should i idle at | EvilPooMonkey | 2008 - 2012 Ninja 250R Tech Talk | 7 | July 8th, 2012 03:00 PM |
| Idle jumps to 9000 rpm on choke then wont stay idle after off | Shawn250 | 2008 - 2012 Ninja 250R Tech Talk | 1 | June 19th, 2012 06:45 AM |
|
|
