November 20th, 2013, 12:34 PM | #1 |
ninjette.org member
Name: Andrew
Location: Northwest Arkansas
Join Date: Mar 2013 Motorcycle(s): 08 Ninja 250R Posts: 29
|
Weak Vacuum
So a while back I had to replace my fuel petcock as it was damaged, but I am still running into the same issue; bike will only run with petcock in PRIME position. I disconnected the vacuum hose at the carb with the bike running, and I found that there is VERY little vacuum present. Do any of y'all have any ideas as to why this is happening? The bike runs perfectly fine otherwise.
|
|
November 20th, 2013, 12:39 PM | #2 |
Rev Limiter
Name: Jay
Location: WI
Join Date: Jul 2013 Motorcycle(s): '06 SV650n, '00 Derbi GPR, '64 CA77 Dream 305, '70 CL450 Scrambler, numerous dirt bikes Posts: A lot.
MOTM - Jun '18, Oct '16
|
Damaged hose or plugged vacuum port?
|
|
November 20th, 2013, 12:42 PM | #3 |
ninjette.org member
Name: Andrew
Location: Northwest Arkansas
Join Date: Mar 2013 Motorcycle(s): 08 Ninja 250R Posts: 29
|
I just pulled the hose itself off and it was free of any obstruction. Where do I go from here?
|
|
November 20th, 2013, 01:17 PM | #4 |
ninjette.org member
Name: Andrew
Location: Northwest Arkansas
Join Date: Mar 2013 Motorcycle(s): 08 Ninja 250R Posts: 29
|
Ok I figured out what the issue was! As it turns out, the previous owner did route the vacuum hoses correctly. Everything is running fine now.
|
1 out of 1 members found this post helpful. |
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Front brakes getting weak over time. | agentbad | 1986 - 2007 Ninja 250R Tech Talk | 5 | June 19th, 2014 12:05 PM |
weak rear brake -- a feature, not a flaw | AlanDog | General Motorcycling Discussion | 14 | May 17th, 2012 09:12 PM |
Weak-ish Brake | saxnbass | 2008 - 2012 Ninja 250R Tech Talk | 6 | February 26th, 2012 07:11 PM |
I'm Weak.... | onetruevibe | Off-Topic | 32 | June 17th, 2011 08:48 PM |
Gas Tank, is it this weak? | Betlog | 2008 - 2012 Ninja 250R Tech Talk | 5 | January 16th, 2010 03:55 PM |
|
|