ninjette.org

Go Back   ninjette.org > 2008 - 2012 Ninja 250R > 2008 - 2012 Ninja 250R Tech Talk

Reply
 
Thread Tools
Old January 19th, 2014, 01:28 PM   #1
Floki
Motorcycle Nurse?
 
Floki's Avatar
 
Name: Jacques
Location: Gulf Coast
Join Date: Sep 2013

Motorcycle(s): 2010 250R, 1998 Ducati 748L #77/100

Posts: 606
I'm broke down in the middle of nowhere...

So I've done my valve job, synced the carbs, and I was having an idle issue.
It would idle around 1000 rpm or really badly when cold.
Now I'm driving on the interstate at 70MPH and I hear a clicking noise. Pull over at the next exit and it sounds like it is coming from the camshaft area. Now I have a loss of power and it feels finnicky. Should I call insurance and get a tow??
I'm about 30 miles from home
Floki is offline   Reply With Quote




Old January 19th, 2014, 01:32 PM   #2
csmith12
The Corner Whisperer
 
csmith12's Avatar
 
Name: Chris (aka Reactor)
Location: Northern KY
Join Date: May 2011

Motorcycle(s): 2010 250 (track), 1992 250, 2006 R6 (street/track), 2008 R6 (track)

Posts: Too much.
MOTY 2015, MOTM - Nov '12, Nov '13
yep, i would call em

check oil
check the cam chain tensioner
csmith12 is offline   Reply With Quote


Old January 19th, 2014, 02:21 PM   #3
Floki
Motorcycle Nurse?
 
Floki's Avatar
 
Name: Jacques
Location: Gulf Coast
Join Date: Sep 2013

Motorcycle(s): 2010 250R, 1998 Ducati 748L #77/100

Posts: 606
Quote:
Originally Posted by csmith12 View Post
yep, i would call em

check oil
check the cam chain tensioner
I used moly grease to hold the shims in place in the bucket, could they fall off?
My exhaust sounds really strange. I had to use new shims on te two exhaust valves for cylinder two.
Floki is offline   Reply With Quote


Old January 19th, 2014, 03:16 PM   #4
Motofool
Daily Ninjette rider
 
Motofool's Avatar
 
Name: Hernan
Location: Florida
Join Date: Mar 2011

Motorcycle(s): 2007 Ninja 250

Posts: A lot.
MOTY - 2016, MOTM - Dec '12, Jan '14, Jan '15, May '16
Cool

Quote:
Originally Posted by Floki View Post
I used moly grease to hold the shims in place in the bucket, could they fall off?
My exhaust sounds really strange. I had to use new shims on te two exhaust valves for cylinder two.
You did OK.

Have you been helped so far?
__________________________________________________
Motofool
.................................Never ride faster than your guardian angel can fly
"Mankind is composed of two sorts of men — those who love and create, and those who hate and destroy. Love is the bond between men, the way to teach and the center of the world." - José Martí
Motofool is offline   Reply With Quote


Old January 19th, 2014, 03:24 PM   #5
mgentz
Board Member
 
Name: ...
Location: WI
Join Date: Dec 2011

Motorcycle(s): 250R (street), 250R (dirt)

Posts: A lot.
Worse case your cam timing is off and a valve is no longer seated correctly. :
mgentz is offline   Reply With Quote


Old January 19th, 2014, 08:44 PM   #6
Floki
Motorcycle Nurse?
 
Floki's Avatar
 
Name: Jacques
Location: Gulf Coast
Join Date: Sep 2013

Motorcycle(s): 2010 250R, 1998 Ducati 748L #77/100

Posts: 606
I did okay. I was two hours late for work and smelly but everything is okay. I'm worried about my bike though. I left it parked hidden behind the repair shop where it will stay until Tuesday.
Floki is offline   Reply With Quote


Old January 19th, 2014, 08:47 PM   #7
CC Cowboy
ninjette.org certified postwhore
 
CC Cowboy's Avatar
 
Name: Whodat
Location: Ware Is.,MA
Join Date: Jan 2009

Motorcycle(s): I pass the wind!

Posts: A lot.
MOTM - Mar '13, Jun '14
Quote:
Originally Posted by Floki View Post
I did okay. I was two hours late for work and smelly but everything is okay. I'm worried about my bike though. I left it parked hidden behind the repair shop where it will stay until Tuesday.
What repair shop was that again?
__________________________________________________
If everything seems under control; you're just not going fast enough!
CC Cowboy is offline   Reply With Quote


1 out of 1 members found this post helpful.
Old January 22nd, 2014, 08:44 PM   #8
PartsNinja
Ninja Parts Master
 
PartsNinja's Avatar
 
Name: Dan
Location: Houma, Louisiana
Join Date: Aug 2013

Motorcycle(s): 2011 Ducati Streetfighter 1098, 2014 Honda CB1100 Cafe, 2007 SV1000S, Quite a few 2008-2012 Ninja 250s

Posts: 366
Quote:
Originally Posted by CC Cowboy View Post
What repair shop was that again?
__________________________________________________
Add me on Instagram: @d_jalb Or follow me on eBay: PartsNinja
PartsNinja is offline   Reply With Quote


Old January 22nd, 2014, 10:11 PM   #9
Floki
Motorcycle Nurse?
 
Floki's Avatar
 
Name: Jacques
Location: Gulf Coast
Join Date: Sep 2013

Motorcycle(s): 2010 250R, 1998 Ducati 748L #77/100

Posts: 606
Friendly Powersports in Slidell, LA. Great shop.
@PartsNinja I have a stock tail light and I stay in Hammond if you want it
Floki is offline   Reply With Quote


Old January 23rd, 2014, 08:46 AM   #10
PartsNinja
Ninja Parts Master
 
PartsNinja's Avatar
 
Name: Dan
Location: Houma, Louisiana
Join Date: Aug 2013

Motorcycle(s): 2011 Ducati Streetfighter 1098, 2014 Honda CB1100 Cafe, 2007 SV1000S, Quite a few 2008-2012 Ninja 250s

Posts: 366
Quote:
Originally Posted by Floki View Post
Friendly Powersports in Slidell, LA. Great shop.
@PartsNinja I have a stock tail light and I stay in Hammond if you want it
If that stay is in good condition, I definitely will take it off of your hands, but Im not about to drive to Hammond for it, would you be willing to throw it in a box? Ill pay for shipping and your time to box it up.
__________________________________________________
Add me on Instagram: @d_jalb Or follow me on eBay: PartsNinja
PartsNinja is offline   Reply With Quote


Reply




Similar Threads
Thread Thread Starter Forum Replies Last Post
What it do from Middle GA amodea1 New Members 22 July 12th, 2017 01:12 PM
Broke Down Takaa 1986 - 2007 Ninja 250R Tech Talk 9 March 25th, 2015 06:19 AM
I broke something... KrazyWalle 2008 - 2012 Ninja 250R Tech Talk 3 October 23rd, 2013 04:27 PM
[nytimes.com] - Motorcycles, Memorials and the Middle of Nowhere Ninjette Newsbot Motorcycling News 0 August 26th, 2013 10:30 AM
I broke it. Hadyn 1986 - 2007 Ninja 250R Tech Talk 31 October 6th, 2010 10:54 AM



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


Motorcycle Safety Foundation

All times are GMT -7. The time now is 02:58 PM.


Website uptime monitoring Host-tracker.com
Powered by vBulletin®
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
User Alert System provided by Advanced User Tagging (Lite) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
Except where otherwise noted, all site contents are © Copyright 2022 ninjette.org, All rights reserved.