ninjette.org

Go Back   ninjette.org > Marketplace > Motorcycle-related

Reply
 
Thread Tools
Old May 16th, 2016, 10:53 AM   #1
abhijitz
ninjette.org sage
 
Name: Abhijit
Location: San Francisco
Join Date: Nov 2011

Motorcycle(s): Many Two Wheels ..

Posts: 611
08 Ninja 250 motor part-out

08 Ninja 250 motor part-out ..

lmk what you want ... will let go stuff cheap. The head is in very good condition (only 2 race weekends). Bike made 33 HP. Bottom end, spun a bearing ... -- dont ask me why bottom end wasnt refreshed {I thought it was, but builder didnt}

I also have OEM levers, MotionPro levers, RIMS, front rotor, front master (broken cap), OEM Rearsets, OEM springs, etc etc.

No fairings (just the piece under the dash), or tank.

text : 408.429.3817
__________________________________________________
[ex-AFM #828 | SMUSA #828 |
Sponsors : MotionPro | LeoVince | Insurrection Racing Gloves | QstarZ Laptimers
+ OEM Parts @ 30-40% OFF : Harry @ 1-877-437-1631,17 harry@hondaeasttoledo.com

Last futzed with by abhijitz; June 8th, 2016 at 05:03 PM.
abhijitz is offline   Reply With Quote




Old June 6th, 2016, 09:45 AM   #2
abhijitz
ninjette.org sage
 
Name: Abhijit
Location: San Francisco
Join Date: Nov 2011

Motorcycle(s): Many Two Wheels ..

Posts: 611
some parts sold. I also have OEM levers, brand new MotionPro levers, wheels, rotors, etc etc. (no plastics/headlight) Lmk, what you need.
__________________________________________________
[ex-AFM #828 | SMUSA #828 |
Sponsors : MotionPro | LeoVince | Insurrection Racing Gloves | QstarZ Laptimers
+ OEM Parts @ 30-40% OFF : Harry @ 1-877-437-1631,17 harry@hondaeasttoledo.com
abhijitz is offline   Reply With Quote


Old June 6th, 2016, 11:56 AM   #3
LittleRedNinjette
Certified Troublemaker
 
LittleRedNinjette's Avatar
 
Name: Teri
Location: Hamilton, NJ
Join Date: Oct 2012

Motorcycle(s): 2006 Ninja 250r "Pikachu", 2017 Ninja 650 "Epona"

Posts: A lot.
MOTM - Aug '13, Aug '14, Feb '17
Do you have a master cylinder?
__________________________________________________


Raven's Rejuvenation
A bruise is a lesson... and each lesson makes us better...
LittleRedNinjette is offline   Reply With Quote


Old June 6th, 2016, 12:02 PM   #4
abhijitz
ninjette.org sage
 
Name: Abhijit
Location: San Francisco
Join Date: Nov 2011

Motorcycle(s): Many Two Wheels ..

Posts: 611
Yes, i do. pm me your # will send you a pic.

Quote:
Originally Posted by LittleRedNinjette View Post
Do you have a master cylinder?
__________________________________________________
[ex-AFM #828 | SMUSA #828 |
Sponsors : MotionPro | LeoVince | Insurrection Racing Gloves | QstarZ Laptimers
+ OEM Parts @ 30-40% OFF : Harry @ 1-877-437-1631,17 harry@hondaeasttoledo.com
abhijitz is offline   Reply With Quote


Old June 6th, 2016, 12:22 PM   #5
LittleRedNinjette
Certified Troublemaker
 
LittleRedNinjette's Avatar
 
Name: Teri
Location: Hamilton, NJ
Join Date: Oct 2012

Motorcycle(s): 2006 Ninja 250r "Pikachu", 2017 Ninja 650 "Epona"

Posts: A lot.
MOTM - Aug '13, Aug '14, Feb '17
Sent, thanks!
__________________________________________________


Raven's Rejuvenation
A bruise is a lesson... and each lesson makes us better...
LittleRedNinjette is offline   Reply With Quote


Old June 7th, 2016, 08:19 PM   #6
TGRIFF
ninjette.org member
 
Name: Tyson
Location: Fayetteville, NC
Join Date: Jan 2012

Motorcycle(s): 08 Ninja 250R

Posts: 72
PM sent.
TGRIFF is offline   Reply With Quote


Old June 7th, 2016, 08:53 PM   #7
cbinker
Track Clown
 
cbinker's Avatar
 
Name: Chris
Location: Kingman, AZ
Join Date: May 2012

Motorcycle(s): '08 250R, '15 TTR-125, SV650 Racer

Posts: A lot.
MOTM - Sep '15
@Trailerboy531
i know a guy that may need a motor
__________________________________________________

TEAM ALFALFA
Unregistered swallows.
cbinker is offline   Reply With Quote


Old June 8th, 2016, 05:00 PM   #8
Trailerboy531
Gear crash test dummy
 
Trailerboy531's Avatar
 
Name: Max
Location: South Bay (So. Cal)
Join Date: May 2011

Motorcycle(s): 2010 Ninja 250 race bike, 2014 ZX-636r

Posts: A lot.
Quote:
Originally Posted by cbinker View Post
@Trailerboy531
i know a guy that may need a motor

I know a guy that needs an un-dented gas tank!
__________________________________________________
CVMA #531
Trailerboy531 is offline   Reply With Quote


Old June 8th, 2016, 05:02 PM   #9
abhijitz
ninjette.org sage
 
Name: Abhijit
Location: San Francisco
Join Date: Nov 2011

Motorcycle(s): Many Two Wheels ..

Posts: 611
Sorry, I dont have a gas tank.
__________________________________________________
[ex-AFM #828 | SMUSA #828 |
Sponsors : MotionPro | LeoVince | Insurrection Racing Gloves | QstarZ Laptimers
+ OEM Parts @ 30-40% OFF : Harry @ 1-877-437-1631,17 harry@hondaeasttoledo.com
abhijitz is offline   Reply With Quote


Old June 8th, 2016, 11:05 PM   #10
Ghostt
in your machine
 
Ghostt's Avatar
 
Name: Scott
Location: Summer Shade, Ky.
Join Date: Oct 2014

Motorcycle(s): 98 Ninja 250/F12 aka ZX-2R "SERENITY", 91 Ninja 500/A5 aka ZX-5R "Phoenix", 84 Honda GL1200A "SIREN"

Posts: A lot.
Blog Entries: 25
MOTM - Jun '17, May '16, Mar '15
What about the entire clutch assembly, side cover, and rod?
__________________________________________________
violente et ignorantia

ZX-2R BLOG
Twitter and Instagram = Ghostt_Scott
I'm not here to change your mind, just to inform.
Ghostt is offline   Reply With Quote


Old June 8th, 2016, 11:08 PM   #11
abhijitz
ninjette.org sage
 
Name: Abhijit
Location: San Francisco
Join Date: Nov 2011

Motorcycle(s): Many Two Wheels ..

Posts: 611
Could you please give me the exact parts # from the fiche diagram that you would need from the clutch assembly? Would you need the friction plates & steel plates? ..

My current springs are Barnett (installed 2 trackdays prior the motor damage) and i wanted to sell them separately.

If you want to email : abhijitz@gmail.com and i can send you the pictures.



Quote:
Originally Posted by Ghostt View Post
What about the entire clutch assembly, side cover, and rod?
__________________________________________________
[ex-AFM #828 | SMUSA #828 |
Sponsors : MotionPro | LeoVince | Insurrection Racing Gloves | QstarZ Laptimers
+ OEM Parts @ 30-40% OFF : Harry @ 1-877-437-1631,17 harry@hondaeasttoledo.com
abhijitz is offline   Reply With Quote


Old June 8th, 2016, 11:49 PM   #12
Ghostt
in your machine
 
Ghostt's Avatar
 
Name: Scott
Location: Summer Shade, Ky.
Join Date: Oct 2014

Motorcycle(s): 98 Ninja 250/F12 aka ZX-2R "SERENITY", 91 Ninja 500/A5 aka ZX-5R "Phoenix", 84 Honda GL1200A "SIREN"

Posts: A lot.
Blog Entries: 25
MOTM - Jun '17, May '16, Mar '15
Quote:
Originally Posted by abhijitz View Post
Could you please give me the exact parts # from the fiche diagram that you would need from the clutch assembly? Would you need the friction plates & steel plates? ..

My current springs are Barnett (installed 2 trackdays prior the motor damage) and i wanted to sell them separately.

If you want to email : abhijitz@gmail.com and i can send you the pictures.
D: All the above, and below. Especially 14044 cable bracket.

I'll be replacing the assembly on a pregen, like @Mohawk did, https://www.ninjette.org/forums/showthread.php?t=259395
Attached Images
File Type: jpg Screenshot_2016-06-09-01-39-18.jpg (79.7 KB, 3 views)
File Type: jpg Screenshot_2016-06-09-01-40-43.jpg (58.5 KB, 2 views)
__________________________________________________
violente et ignorantia

ZX-2R BLOG
Twitter and Instagram = Ghostt_Scott
I'm not here to change your mind, just to inform.
Ghostt is offline   Reply With Quote


Old June 10th, 2016, 08:41 AM   #13
abhijitz
ninjette.org sage
 
Name: Abhijit
Location: San Francisco
Join Date: Nov 2011

Motorcycle(s): Many Two Wheels ..

Posts: 611
Ya, i have all of that.

Let me know what you think is a fair price for all of these. My clutch cover has some scratches but doesnt leak or have any holes. You may have to buy a new gasket.

If you want me to price out, i will do so tomorrow and let you know.

I assume you dont need the shift rod?


Quote:
Originally Posted by Ghostt View Post
D: All the above, and below. Especially 14044 cable bracket.

I'll be replacing the assembly on a pregen, like @Mohawk did, https://www.ninjette.org/forums/showthread.php?t=259395
__________________________________________________
[ex-AFM #828 | SMUSA #828 |
Sponsors : MotionPro | LeoVince | Insurrection Racing Gloves | QstarZ Laptimers
+ OEM Parts @ 30-40% OFF : Harry @ 1-877-437-1631,17 harry@hondaeasttoledo.com
abhijitz is offline   Reply With Quote


Old June 10th, 2016, 08:50 AM   #14
Ghostt
in your machine
 
Ghostt's Avatar
 
Name: Scott
Location: Summer Shade, Ky.
Join Date: Oct 2014

Motorcycle(s): 98 Ninja 250/F12 aka ZX-2R "SERENITY", 91 Ninja 500/A5 aka ZX-5R "Phoenix", 84 Honda GL1200A "SIREN"

Posts: A lot.
Blog Entries: 25
MOTM - Jun '17, May '16, Mar '15
Quote:
Originally Posted by abhijitz View Post
Ya, i have all of that.

Let me know what you think is a fair price for all of these. My clutch cover has some scratches but doesnt leak or have any holes. You may have to buy a new gasket.

If you want me to price out, i will do so tomorrow and let you know.

I assume you dont need the shift rod?
PM replied, and might as well take the shift rod as well.
__________________________________________________
violente et ignorantia

ZX-2R BLOG
Twitter and Instagram = Ghostt_Scott
I'm not here to change your mind, just to inform.
Ghostt is offline   Reply With Quote


Old June 13th, 2016, 07:33 PM   #15
abhijitz
ninjette.org sage
 
Name: Abhijit
Location: San Francisco
Join Date: Nov 2011

Motorcycle(s): Many Two Wheels ..

Posts: 611
Pictures and a short video sent

Quote:
Originally Posted by Ghostt View Post
PM replied, and might as well take the shift rod as well.
__________________________________________________
[ex-AFM #828 | SMUSA #828 |
Sponsors : MotionPro | LeoVince | Insurrection Racing Gloves | QstarZ Laptimers
+ OEM Parts @ 30-40% OFF : Harry @ 1-877-437-1631,17 harry@hondaeasttoledo.com
abhijitz is offline   Reply With Quote


Old July 11th, 2016, 01:21 PM   #16
SSG54
ninjette.org member
 
SSG54's Avatar
 
Name: Benny
Location: Brooklyn NY
Join Date: Sep 2012

Motorcycle(s): 2008 Ninja 250R

Posts: 149
do you have all the wiring? mine melted together :/
SSG54 is offline   Reply With Quote


Old July 11th, 2016, 01:27 PM   #17
abhijitz
ninjette.org sage
 
Name: Abhijit
Location: San Francisco
Join Date: Nov 2011

Motorcycle(s): Many Two Wheels ..

Posts: 611
Sorry, i do not have any wiring.

Quote:
Originally Posted by SSG54 View Post
do you have all the wiring? mine melted together :/
__________________________________________________
[ex-AFM #828 | SMUSA #828 |
Sponsors : MotionPro | LeoVince | Insurrection Racing Gloves | QstarZ Laptimers
+ OEM Parts @ 30-40% OFF : Harry @ 1-877-437-1631,17 harry@hondaeasttoledo.com
abhijitz is offline   Reply With Quote


Reply




Similar Threads
Thread Thread Starter Forum Replies Last Post
08' Ninja 250 Parts bike part out *you name the part and price* BuckyNaked Motorcycle-related 106 July 12th, 2011 02:01 PM
[hell for leather] - Ultra Motor A2B: one part bicycle, one part electric scooter Ninjette Newsbot Motorcycling News 0 June 12th, 2008 12:56 PM


Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


Motorcycle Safety Foundation

All times are GMT -7. The time now is 09:00 PM.


Website uptime monitoring Host-tracker.com
Powered by vBulletin®
Copyright ©2000 - 2023, Jelsoft Enterprises Ltd.
User Alert System provided by Advanced User Tagging (Lite) - vBulletin Mods & Addons Copyright © 2023 DragonByte Technologies Ltd.
Except where otherwise noted, all site contents are Copyright 2022 ninjette.org, All rights reserved.