May 17th, 2014, 10:53 AM | #1 |
ninjette.org guru
Name: Josh
Location: Kern
Join Date: Dec 2013 Motorcycle(s): '04 Ninja 250R Posts: 367
|
Slow crawl to idle.
When coming to a stop or just revibg it at idle, it will hang at 2k rpm then slowly crawl down to idle. I have idle set at 1200.
Is this normal? Or could something be wrong. I haven't noticed it till now. Last I did was remove tank, clean airbox. Not sure if I put something back wrong or what. Please help. |
|
May 20th, 2014, 06:59 AM | #2 |
The Corner Whisperer
Name: Chris (aka Reactor)
Location: Northern KY
Join Date: May 2011 Motorcycle(s): 2010 250 (track), 1992 250, 2006 R6 (street/track), 2008 R6 (track) Posts: Too much.
MOTY 2015, MOTM - Nov '12, Nov '13
|
If everything was good before, spritz some carb cleaner around the vacuum lines, carb boots and airbox to check for leaks.
__________________________________________________
Goal: Shake A Million Hands | Look through the corners | Track Day Prep | Closest track? | The Mid-Ohio School |
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
[motorcycle-usa.com] - Smoky Mountain Crawl Ruckus|Grom Event '15 | Ninjette Newsbot | Motorcycling News | 0 | February 26th, 2015 09:40 PM |
Giving up the slow bike for a slow car | CycleCam303 | Off-Topic | 17 | February 18th, 2014 02:13 AM |
Slow throttle response and slow return to idle help | Crriiissss | 1986 - 2007 Ninja 250R Tech Talk | 22 | August 7th, 2013 12:26 AM |
Portland Bike Pub Crawl | ninja_sleeper | Ride Reports | 7 | September 2nd, 2011 04:49 PM |
slow return to idle | red | 2008 - 2012 Ninja 250R Tech Talk | 4 | April 9th, 2011 09:25 PM |
|
|