April 3rd, 2015, 06:22 PM | #1 |
ninjette.org certified postwhore
Name: Inderveer
Location: San Jose
Join Date: Nov 2012 Motorcycle(s): '07 ex250-F/J Posts: A lot.
|
Weighted bar ends for woodcraft bars 5/8"
Hey guys, the right one came out and I wanna eliminate the vibes. Lemme know if you've got any or which ones will fit. Thanks in advance.
|
|
April 3rd, 2015, 09:33 PM | #2 |
Track Clown
Name: Chris
Location: Kingman, AZ
Join Date: May 2012 Motorcycle(s): '08 250R, 21 MV F3 800, Kawasaki 400 build Posts: A lot.
MOTM - Sep '15
|
didn't know woodcraft bars have weights on them.
|
|
April 3rd, 2015, 09:39 PM | #3 |
ninjette.org certified postwhore
Name: Inderveer
Location: San Jose
Join Date: Nov 2012 Motorcycle(s): '07 ex250-F/J Posts: A lot.
|
they don't. The slider/plug thing came out.
|
|
April 3rd, 2015, 09:40 PM | #4 |
Track Clown
Name: Chris
Location: Kingman, AZ
Join Date: May 2012 Motorcycle(s): '08 250R, 21 MV F3 800, Kawasaki 400 build Posts: A lot.
MOTM - Sep '15
|
oh, mine are ground down from crashing. if it is a problem, might just get a new bar.
|
|
April 3rd, 2015, 10:22 PM | #5 |
ninjette.org certified postwhore
Name: Inderveer
Location: San Jose
Join Date: Nov 2012 Motorcycle(s): '07 ex250-F/J Posts: A lot.
|
The ones that came with the bars weren't a problem, it's just that I notice the vibes more when riding for 30+ minutes. The universal bar ends I see online are made to fit 7/8" bars, but woodcraft ones are 5/8". There's a diy here I might try that uses the stock ends.
|
|
April 7th, 2015, 09:48 AM | #6 |
ninjette.org sage
Name: Brian
Location: Orange County, CA
Join Date: Apr 2012 Motorcycle(s): '12 ninja 250r Posts: 762
|
Yea, try out the DIY with the stock ends. Very simple, cheap, and does the job.
|
1 out of 1 members found this post helpful. |
April 7th, 2015, 09:54 AM | #7 |
ninjette.org certified postwhore
Name: Jason
Location: Monroe, MI
Join Date: May 2013 Motorcycle(s): '75 CB550:.'82 XV920:.'00 KLR650:.'00 EX250:.'08 Ninja 250 Posts: A lot.
MOTM - June '15
|
the OD of your bars is 7/8" that is what is referred to as a 7/8" bar not the ID
__________________________________________________
'82 XV920: Soon to be tracker--'00 KLR685:adv --'04 DRZ400E--'12 Super Tenere --'13 Versys Ride more, worry less. |
1 out of 1 members found this post helpful. |
April 7th, 2015, 10:24 AM | #8 |
Fighting Texas Aggie '05
Name: Neil
Location: Hutto, TX
Join Date: Feb 2009 Motorcycle(s): '07 ZX6R, '08 Versys, '09 250R Track, '93 F2/F3 Track Posts: A lot.
|
woodcraft makes their own weighted bar ends you car purchase with different weights
__________________________________________________
Keep it rubber side down and enjoy the ride Get healthy - Get Fit - Change Your Life Click Here Or PM Me To Find More - Advocare |
|
April 8th, 2015, 01:12 AM | #9 |
ninjette.org certified postwhore
Name: Inderveer
Location: San Jose
Join Date: Nov 2012 Motorcycle(s): '07 ex250-F/J Posts: A lot.
|
yea, imma try out other options. If they don't do the trick then I will go with the WC ones.
you serious?! hahahaha mah bad |
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
HVMP Heavy Weighted Bar Ends | rasta | Motorcycle-related | 1 | March 10th, 2014 03:16 PM |
DIY -Weighted Bar Ends for Clipons for FREE!!! (almost) | kkim | 2008 - 2012 Ninja 250R Tech Talk | 36 | September 27th, 2011 12:10 AM |
Woodcraft Bar Ends replacement | minizoom | 2008 - 2012 Ninja 250R Tech Talk | 13 | March 31st, 2011 10:11 PM |
1pr black "shito" :) weighted bar ends | want1sobad | Motorcycle-related | 0 | March 6th, 2011 05:18 PM |
|
|