October 17th, 2011, 01:33 PM | #1 |
ninjette.org member
Name: Mike
Location: Wayne, NJ
Join Date: May 2011 Motorcycle(s): 2011 Black Ninja @50r Posts: 12
|
Can anyone suggest a good rear tire hugger?
I went through two already and both had fitment issues. Originally tried the sportsi one, but it did not fit around the brake caliber properly and it cracked during install! Than tried another from ebay by a member listed as edrivestore, and it was off center and rubbing the right side of the stock wheel. So figured I would come on here and ask what you guys have successful installed without a any fitment issues. Thanks!!!
|
|
October 17th, 2011, 01:38 PM | #2 |
The Corner Whisperer
Name: Chris (aka Reactor)
Location: Northern KY
Join Date: May 2011 Motorcycle(s): 2010 250 (track), 1992 250, 2006 R6 (street/track), 2008 R6 (track) Posts: Too much.
MOTY 2015, MOTM - Nov '12, Nov '13
|
search scotts hugger, good price and great quality and fitment.
__________________________________________________
Goal: Shake A Million Hands | Look through the corners | Track Day Prep | Closest track? | The Mid-Ohio School |
|
October 17th, 2011, 02:49 PM | #3 |
ninjette.org member
Name: Dash
Location: PA
Join Date: Jun 2011 Motorcycle(s): stolen :( Posts: 158
|
+ 1
Great quality, ease of install and no more cleaning crud off of my rear shock. |
|
October 18th, 2011, 01:33 AM | #4 |
CPT Falcon
Name: J.Emmett Turner
Location: Newnan, GA
Join Date: Apr 2009 Motorcycle(s): '08 CP Blue EX250J, '97 unpainted EX250F, 2nd '97 unpainted EX250F (no engine), '07 black EX250F Posts: A lot.
|
Still have your Sportisi one? Parts/pieces perhaps?
|
|
October 18th, 2011, 01:57 AM | #5 |
ninjette.org certified postwhore
Name: Wayan
Location: Bali - Indonesia
Join Date: Apr 2009 Motorcycle(s): 2014 Z250 Posts: A lot.
|
http://www.ninjette.org/forums/showp...46&postcount=1
but the 2nd GB hasn't really taken off yet. about to send 30 for the 1st GB this week.
__________________________________________________
Kawasaki Z250, Bored up to 300cc with 12.8 CR, 41hp at wheel 27nm torque, Two bros full exhaust with DB killer Dynojet Power Commander V, KnN Open filter, intake and exhaust ported, Puig Windshield |
|
October 20th, 2011, 04:00 AM | #6 |
ninjette.org member
Name: Mike
Location: Wayne, NJ
Join Date: May 2011 Motorcycle(s): 2011 Black Ninja @50r Posts: 12
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Rear Tire Hugger | Dark Wolf | 1986 - 2007 Ninja 250R Farkles | 7 | October 18th, 2012 10:57 PM |
Rear Tire Hugger For Sale, MUST GO! | egutierrez90 | Motorcycle-related | 5 | March 2nd, 2012 09:14 PM |
My rear tire hugger | Gorilla25 | 2008 - 2012 Ninja 250R Farkles | 15 | September 13th, 2011 02:12 AM |
Ebay Rear tire Hugger | Dat_Ninja_There | 2008 - 2012 Ninja 250R Farkles | 5 | March 3rd, 2011 12:37 PM |
|
|