My newest project: '08 Ninja 250 - Page 2

nickjpass · May 29th, 2014, 08:20 PM

Check out cycle cruza's gps mount on YouTube.

Singh2jz · May 29th, 2014, 10:19 PM

That paint is flippin' awesome, especially keeping the tail black. Can't wait to see 4/4 of the bike!

verboten1 · May 30th, 2014, 06:47 AM

Quote:

Originally Posted by sharky nrk

review on luggage

Initial impressions: great fit and finish, bags are nice, good zippers.
They don't move around much, but they do rub right on the point of the rear fairing, it comes with some clear paint protection film though.

Quote:

Originally Posted by nickjpass

Check out cycle cruza's gps mount on YouTube.

Thanks, I'm pretty sure I'm going with the twisted throttle mount, or at least making one similar.

Quote:

Originally Posted by Singh2jz

That paint is flippin' awesome, especially keeping the tail black. Can't wait to see 4/4 of the bike!

Hah, thanks! I wish I could get all OEM parts in the plain pearl white, I already have the headlight fairing and the fender in the white. Painting the tail black was actually an internal debate I had. I really wanted it white, but decided that I didn't want to deal with the dirt back there.

verboten1 · June 1st, 2014, 05:48 PM

I think something is bent, pretty badly, I'm hoping it's just the front fairing mount, I had a hard time getting all of those parts to line up, then today, I was going to mount the left fairing, and there is just no way it will work. Won't bolt to the tank, won't bolt to the other side, and have to bend the other side to make it fit.

You can see here how the right side poked out, I though nothing of it. Until trying to put them together, and they are way off, bringing this one to the middle bends the part back by the rear most mounting bolt. Time for a new bracket!

Skullz · June 1st, 2014, 08:05 PM

Wow, that thing is a mile off and the bottom should tuck right behind the front tire.
Does the other side hit the engine and have a huge gap when trying to bolt it up?

verboten1 · June 1st, 2014, 08:14 PM

Yeah, I was able to get a bolt in, but the right side was hitting exhaust. I'll be searching for parts, have to get one ASAP now, I can't have those nice freshly finished parts sitting around getting scratched!

verboten1 · June 26th, 2014, 06:11 PM

Today, my new front fairing bracket showed up, thanks to @rc racer!

I wasted no time bolting it up and throwing on my fairings!

650R blinkers I think

I love orange

Since the decal was under the clear coat, i actually left them, and got an awesome ghost effect on it, too bad my tank bag screwed the paint up, I should have known!

Hero Danny · June 26th, 2014, 06:42 PM

wow! nice work! I think it's safe to say that you saved that bike!

Where did you get the shortys? I like em'

Keep up the good work

rc racer · June 26th, 2014, 06:58 PM

Good to see you got the bracket. Even better to see your bike together and straight!

verboten1 · June 26th, 2014, 07:01 PM

Quote:

Originally Posted by Hero Danny

wow! nice work! I think it's safe to say that you saved that bike!

Where did you get the shortys? I like em'

Keep up the good work

They are ebay levers, I have a set on each of my bikes, really love the feel of the shortys and the color

Quote:

Originally Posted by rc racer

Good to see you got the bracket. Even better to see your bike together and straight!

Thanks again! I'm glad it fixed the problem.

verboten1 · June 28th, 2014, 03:09 PM

More parts showed up today, finally!

My cockpit is a. Bit changed up now, from clipons

To stock style bars and risers with Oury road grips, I love how much they kill the vibes

And old broken turn signal

To custom LED blaster x integrated tail.

verboten1 · June 29th, 2014, 06:21 AM

My geek buddies and I decided that this bike is/will be a clone trooper from the 212th dug to the white/orange theme.

roc0487 · June 29th, 2014, 02:00 PM

This thing turned out badass, awesome work man!

verboten1 · June 29th, 2014, 02:23 PM

Thanks! I need to get my power outlets wired up and installed in the inner fairing, and get a gps mount on there and I am pretty well set.

Maybe some buell lowered pegs, it's a bit tight for me still

Klondike1020 · June 29th, 2014, 05:55 PM

Quote:

Originally Posted by Hero Danny

wow! nice work! I think it's safe to say that you saved that bike!
Keep up the good work

What are you getting at! - it was about to be parted out hen I got it- and I did the bare min to get it rideable. Lol

Also-
Yes they are 650 signals
And that rear signal wasn't broke when I parked it .... That's on you verboten1
Lol
Bike looks great. I was tempted to pull the slip on when you haggled me down but I am thrilled to see what you've done with the bike!!!

It looks awesome. All the parts you have invested in it- looks like it would be a really sweet ride at this point

Klondike1020 · June 29th, 2014, 05:58 PM

@verboten1 - you painted the pillon seat , admit it

verboten1 · June 29th, 2014, 06:23 PM

Quote:

Originally Posted by Klondike1020

What are you getting at! - it was about to be parted out hen I got it- and I did the bare min to get it rideable. Lol

Also-
Yes they are 650 signals
And that rear signal wasn't broke when I parked it .... That's on you verboten1
Lol
Bike looks great. I was tempted to pull the slip on when you haggled me down but I am thrilled to see what you've done with the bike!!!

It looks awesome. All the parts you have invested in it- looks like it would be a really sweet ride at this point

Thanks, it's finally getting where I envisioned it

Quote:

Originally Posted by Klondike1020

@verboten1 - you painted the pillon seat , admit it

Dyed it actually, but yes, that's the green seat under there still

Hero Danny · June 29th, 2014, 06:45 PM

Quote:

Originally Posted by Klondike1020

What are you getting at! - it was about to be parted out hen I got it- and I did the bare min to get it rideable. Lol

No offense intended lmao

Sirref · June 29th, 2014, 06:49 PM

hey @verboten1 I'm considering putting clip-on bars and rearset adjusters on my ninja 300 sometime in July, are you going to do anything with yours since you switched from clip-on bars to stock risers?

Since I'm posting, dude that looks sick. I like the white/black/orange you have going on there though I feel a bit more orange would make the look a bit better, maybe orange rim tape? I see some on the rear but not the front

verboten1 · June 29th, 2014, 07:03 PM

Quote:

Originally Posted by Sirref

hey @verboten1 I'm considering putting clip-on bars and rearset adjusters on my ninja 300 sometime in July, are you going to do anything with yours since you switched from clip-on bars to stock risers?

Since I'm posting, dude that looks sick. I like the white/black/orange you have going on there though I feel a bit more orange would make the look a bit better, maybe orange rim tape? I see some on the rear but not the front

I don't plan on using the clipons for anything. They are ok, just didn't work well for me

Thanks, I'm planning on more orange, a little on the fairings, and once I get a new front wheel, I'll install the stripes. I have some reflective orange striping I may use as well. My helmet is white/orange also.

Sirref · June 29th, 2014, 07:04 PM

Quote:

Originally Posted by verboten1

I don't plan on using the clipons for anything. They are ok, just didn't work well for me

well if you aren't planning to use them how much would you sell them for (not including shipping)

Singh2jz · July 1st, 2014, 01:11 AM

lookin better and better man!

verboten1 · July 1st, 2014, 03:35 PM

Thanks!

Just added a little more orange to the helmet...waiting on some more parts though.

verboten1 · July 1st, 2014, 04:24 PM

Another part showed up! Woohoo

mgentz · July 1st, 2014, 05:46 PM

Orange? You are a man after @rojoracing53 's heart.

verboten1 · July 1st, 2014, 05:54 PM

Orange is my color!
Phone,work laptop, bath towels, clocks, watches, you name it, if I can find it orange, I buy it!
My old luggage on the KLR was orange, and I really want a KTM...LOL

rojoracing53 · July 1st, 2014, 06:07 PM

did someone say orange?

verboten1 · July 1st, 2014, 06:13 PM

Quote:

Originally Posted by rojoracing53

did someone say orange?

Maybe it's a Jason thing, another Jason I know also loves it.

I almost went with this color

rojoracing53 · July 1st, 2014, 06:20 PM

Well I did have bright orange hair as a kid so that could be my reason, plus KTM's are just so sexy.

verboten1 · July 2nd, 2014, 07:40 PM

Just messing with some vinyl...I would really want to keep the band a bit narrower and completely follow the curve and curve the bottom if I did it for real.

c-dog · July 2nd, 2014, 08:13 PM

Those 650R front turn signals look really nice. I wonder if you could get the back ones from a 650R to fit as well. I like the angular look to them versus the rounder 250R turn signals.

The front signals you have look awesome! Great work on the restoration project.

Hero Danny · July 2nd, 2014, 08:20 PM

I think the vinyl may be too much. Maybe you could do the mirrors orange, or do some integrated orange turn signals in your mirrors.

Or like you said, maybe just a slightly thinner piece of vinyl. Like maybe half as big as the one you did.

verboten1 · July 2nd, 2014, 08:29 PM

Quote:

Originally Posted by c-dog

Those 650R front turn signals look really nice. I wonder if you could get the back ones from a 650R to fit as well. I like the angular look to them versus the rounder 250R turn signals.

The front signals you have look awesome! Great work on the restoration project.

Thanks, I really wanted to use these, as I also liked that angularity and thought it fit the bike very well.

I believe these are off the back, IIRC the fronts are kind of integrated into the fairing shape.

Quote:

Originally Posted by Hero Danny

I think the vinyl may be too much. Maybe you could do the mirrors orange, or do some integrated orange turn signals in your mirrors.

Or like you said, maybe just a slightly thinner piece of vinyl. Like maybe half as big as the one you did.

Yeah, this is pretty big, I'm not sure what I want to do. I don't really want to put anything on the new paint, but I need to do something! This is just what I had, split it in half and laid it down.

verboten1 · July 4th, 2014, 10:41 AM

Another try!

c-dog · July 4th, 2014, 11:20 AM

Cool! I see what you are doing there - a Stormtrooper theme. How about the Imperial logo in white?

verboten1 · July 28th, 2014, 08:18 AM

Clone trooper actually...but yeah, the wife kind of suggested it.

One of the last things I plan on doing is a front brake upgrade.

verboten1 · September 17th, 2014, 09:08 AM

Added a new toy to the bike, SJCam SJ4000

1080P, I put a 32 GB card in, the wife and I are riding across the Mackinaw Bridge, I'll be recording her!

verboten1 · October 13th, 2014, 08:45 PM

I picked up a small LED light to supplement my lights for the late night twisty runs.

This is the pattern of only the LED

Klondike1020 · October 13th, 2014, 09:29 PM

HAHA you have gone so far with this bike so quickly.

GREAT JOB. it is coming out awsome
I want to see a pic of how you put the LEDS on it

Klondike1020 · October 19th, 2014, 08:32 AM

Quote:

Originally Posted by c-dog

Those 650R front turn signals look really nice. I wonder if you could get the back ones from a 650R to fit as well. I like the angular look to them versus the rounder 250R turn signals.

The front signals you have look awesome! Great work on the restoration project.

The 650 signals can be made to fit the front and back. you can take them apart and rewire them easily to fit other bikes.

They do look much nicer than stock and provide much better visibility than flush mounts

They look great on his clone trooper.

May 29th, 2014, 08:20 PM	#41
nickjpass #squid Name: nickypoo Location: Five Guys Join Date: Jul 2011 Motorcycle(s): Track dedicated 2008 ZX6R Posts: A lot. MOTM - Jul '16	Check out cycle cruza's gps mount on YouTube. __________________________________________________

May 29th, 2014, 10:19 PM	#42
Singh2jz ninjette.org certified postwhore Name: Inderveer Location: San Jose Join Date: Nov 2012 Motorcycle(s): '07 ex250-F/J Posts: A lot.	That paint is flippin' awesome, especially keeping the tail black. Can't wait to see 4/4 of the bike! __________________________________________________ The Bike \| The Truck

June 1st, 2014, 05:48 PM	#44
verboten1 ninjette.org certified postwhore Name: Jason Location: Monroe, MI Join Date: May 2013 Motorcycle(s): '75 CB550:.'82 XV920:.'00 KLR650:.'00 EX250:.'08 Ninja 250 Posts: A lot. MOTM - June '15	I think something is bent, pretty badly, I'm hoping it's just the front fairing mount, I had a hard time getting all of those parts to line up, then today, I was going to mount the left fairing, and there is just no way it will work. Won't bolt to the tank, won't bolt to the other side, and have to bend the other side to make it fit. You can see here how the right side poked out, I though nothing of it. Until trying to put them together, and they are way off, bringing this one to the middle bends the part back by the rear most mounting bolt. Time for a new bracket! __________________________________________________ '82 XV920: Soon to be tracker--'00 KLR685:adv --'04 DRZ400E--'12 Super Tenere --'13 Versys Ride more, worry less.

June 1st, 2014, 08:14 PM	#46
verboten1 ninjette.org certified postwhore Name: Jason Location: Monroe, MI Join Date: May 2013 Motorcycle(s): '75 CB550:.'82 XV920:.'00 KLR650:.'00 EX250:.'08 Ninja 250 Posts: A lot. MOTM - June '15	Yeah, I was able to get a bolt in, but the right side was hitting exhaust. I'll be searching for parts, have to get one ASAP now, I can't have those nice freshly finished parts sitting around getting scratched! __________________________________________________ '82 XV920: Soon to be tracker--'00 KLR685:adv --'04 DRZ400E--'12 Super Tenere --'13 Versys Ride more, worry less.

June 26th, 2014, 06:11 PM	#47
verboten1 ninjette.org certified postwhore Name: Jason Location: Monroe, MI Join Date: May 2013 Motorcycle(s): '75 CB550:.'82 XV920:.'00 KLR650:.'00 EX250:.'08 Ninja 250 Posts: A lot. MOTM - June '15	Today, my new front fairing bracket showed up, thanks to @rc racer! I wasted no time bolting it up and throwing on my fairings! 650R blinkers I think I love orange Since the decal was under the clear coat, i actually left them, and got an awesome ghost effect on it, too bad my tank bag screwed the paint up, I should have known! __________________________________________________ '82 XV920: Soon to be tracker--'00 KLR685:adv --'04 DRZ400E--'12 Super Tenere --'13 Versys Ride more, worry less.

June 1st, 2014, 08:05 PM	#45
Skullz ninjette.org guru Name: Ray Location: 48162 Join Date: Aug 2013 Motorcycle(s): 2012 Ninja 250 Posts: 450	Wow, that thing is a mile off and the bottom should tuck right behind the front tire. Does the other side hit the engine and have a huge gap when trying to bolt it up?

June 26th, 2014, 06:42 PM	#48
Hero Danny Inline 4!!! Name: Danny Location: MA Join Date: May 2014 Motorcycle(s): 2008 CBR600rr, 1987 KLR 250 Posts: A lot.	wow! nice work! I think it's safe to say that you saved that bike! Where did you get the shortys? I like em' Keep up the good work __________________________________________________ Be careful. Remember you are invisible

June 26th, 2014, 06:58 PM	#49
rc racer ninjette.org member Name: robert Location: Dallas Join Date: Oct 2012 Motorcycle(s): 2015 R3, 1969 CB160, 2002 TTR125, 2007 KX250F Posts: 96	Good to see you got the bracket. Even better to see your bike together and straight!

June 28th, 2014, 03:09 PM	#51
verboten1 ninjette.org certified postwhore Name: Jason Location: Monroe, MI Join Date: May 2013 Motorcycle(s): '75 CB550:.'82 XV920:.'00 KLR650:.'00 EX250:.'08 Ninja 250 Posts: A lot. MOTM - June '15	More parts showed up today, finally! My cockpit is a. Bit changed up now, from clipons To stock style bars and risers with Oury road grips, I love how much they kill the vibes And old broken turn signal To custom LED blaster x integrated tail. __________________________________________________ '82 XV920: Soon to be tracker--'00 KLR685:adv --'04 DRZ400E--'12 Super Tenere --'13 Versys Ride more, worry less.

June 29th, 2014, 06:21 AM	#52
verboten1 ninjette.org certified postwhore Name: Jason Location: Monroe, MI Join Date: May 2013 Motorcycle(s): '75 CB550:.'82 XV920:.'00 KLR650:.'00 EX250:.'08 Ninja 250 Posts: A lot. MOTM - June '15	My geek buddies and I decided that this bike is/will be a clone trooper from the 212th dug to the white/orange theme. __________________________________________________ '82 XV920: Soon to be tracker--'00 KLR685:adv --'04 DRZ400E--'12 Super Tenere --'13 Versys Ride more, worry less.

June 29th, 2014, 02:00 PM	#53
roc0487 ninjette.org member Name: Mike Location: Pennsylvania Join Date: Jun 2014 Motorcycle(s): 08 250 Posts: 22	This thing turned out badass, awesome work man!

June 29th, 2014, 02:23 PM	#54
verboten1 ninjette.org certified postwhore Name: Jason Location: Monroe, MI Join Date: May 2013 Motorcycle(s): '75 CB550:.'82 XV920:.'00 KLR650:.'00 EX250:.'08 Ninja 250 Posts: A lot. MOTM - June '15	Thanks! I need to get my power outlets wired up and installed in the inner fairing, and get a gps mount on there and I am pretty well set. Maybe some buell lowered pegs, it's a bit tight for me still __________________________________________________ '82 XV920: Soon to be tracker--'00 KLR685:adv --'04 DRZ400E--'12 Super Tenere --'13 Versys Ride more, worry less.

June 29th, 2014, 05:58 PM	#56
Klondike1020 Intrepid Adventurer Name: Josh Location: Rochester/Buffalo NY Join Date: Jan 2012 Motorcycle(s): 2004 GSXR 750 , 71 cb350streettracker, 07 Polaris Predator 500 Posts: A lot.	@verboten1 - you painted the pillon seat , admit it __________________________________________________ LIFE IS NOT FOR REGRETS OR EXCUSES. Breath deep, seek peace. Embrace the Madness. Life is good, let it be

June 29th, 2014, 06:49 PM	#59
Sirref Private Joker Name: Ben Location: Towson, MD Join Date: Nov 2012 Motorcycle(s): '99/'01 Ninja 250 "sketchy", '13 Ninja 300 "yoshi", '03 GSXR 600 "merlin" Posts: A lot. MOTM - Mar '14	hey @verboten1 I'm considering putting clip-on bars and rearset adjusters on my ninja 300 sometime in July, are you going to do anything with yours since you switched from clip-on bars to stock risers? Since I'm posting, dude that looks sick. I like the white/black/orange you have going on there though I feel a bit more orange would make the look a bit better, maybe orange rim tape? I see some on the rear but not the front

July 1st, 2014, 01:11 AM	#62
Singh2jz ninjette.org certified postwhore Name: Inderveer Location: San Jose Join Date: Nov 2012 Motorcycle(s): '07 ex250-F/J Posts: A lot.	lookin better and better man! __________________________________________________ The Bike \| The Truck

July 1st, 2014, 03:35 PM	#63
verboten1 ninjette.org certified postwhore Name: Jason Location: Monroe, MI Join Date: May 2013 Motorcycle(s): '75 CB550:.'82 XV920:.'00 KLR650:.'00 EX250:.'08 Ninja 250 Posts: A lot. MOTM - June '15	Thanks! Just added a little more orange to the helmet...waiting on some more parts though. __________________________________________________ '82 XV920: Soon to be tracker--'00 KLR685:adv --'04 DRZ400E--'12 Super Tenere --'13 Versys Ride more, worry less.

July 1st, 2014, 04:24 PM	#64
verboten1 ninjette.org certified postwhore Name: Jason Location: Monroe, MI Join Date: May 2013 Motorcycle(s): '75 CB550:.'82 XV920:.'00 KLR650:.'00 EX250:.'08 Ninja 250 Posts: A lot. MOTM - June '15	Another part showed up! Woohoo __________________________________________________ '82 XV920: Soon to be tracker--'00 KLR685:adv --'04 DRZ400E--'12 Super Tenere --'13 Versys Ride more, worry less.

July 1st, 2014, 05:46 PM	#65
mgentz Board Member Name: ... Location: WI Join Date: Dec 2011 Motorcycle(s): 250R (street), 250R (dirt) Posts: A lot.	Orange? You are a man after @rojoracing53 's heart.

July 1st, 2014, 05:54 PM	#66
verboten1 ninjette.org certified postwhore Name: Jason Location: Monroe, MI Join Date: May 2013 Motorcycle(s): '75 CB550:.'82 XV920:.'00 KLR650:.'00 EX250:.'08 Ninja 250 Posts: A lot. MOTM - June '15	Orange is my color! Phone,work laptop, bath towels, clocks, watches, you name it, if I can find it orange, I buy it! My old luggage on the KLR was orange, and I really want a KTM...LOL __________________________________________________ '82 XV920: Soon to be tracker--'00 KLR685:adv --'04 DRZ400E--'12 Super Tenere --'13 Versys Ride more, worry less.

July 1st, 2014, 06:07 PM	#67
rojoracing53 Fast-Guy wannabe Name: Jason Location: Brentwood, Ca Join Date: Oct 2011 Motorcycle(s): 2009 Ninja250, 2011 RM-Z250, 2004 NSR50, Posts: A lot. MOTM - Jan '13	did someone say orange?

July 1st, 2014, 06:20 PM	#69
rojoracing53 Fast-Guy wannabe Name: Jason Location: Brentwood, Ca Join Date: Oct 2011 Motorcycle(s): 2009 Ninja250, 2011 RM-Z250, 2004 NSR50, Posts: A lot. MOTM - Jan '13	Well I did have bright orange hair as a kid so that could be my reason, plus KTM's are just so sexy.
	1 out of 1 members found this post helpful.

July 2nd, 2014, 07:40 PM	#70
verboten1 ninjette.org certified postwhore Name: Jason Location: Monroe, MI Join Date: May 2013 Motorcycle(s): '75 CB550:.'82 XV920:.'00 KLR650:.'00 EX250:.'08 Ninja 250 Posts: A lot. MOTM - June '15	Just messing with some vinyl...I would really want to keep the band a bit narrower and completely follow the curve and curve the bottom if I did it for real. __________________________________________________ '82 XV920: Soon to be tracker--'00 KLR685:adv --'04 DRZ400E--'12 Super Tenere --'13 Versys Ride more, worry less.

July 2nd, 2014, 08:13 PM	#71
c-dog ninjette.org sage Name: - Location: - Join Date: May 2010 Motorcycle(s): - Posts: 591	Those 650R front turn signals look really nice. I wonder if you could get the back ones from a 650R to fit as well. I like the angular look to them versus the rounder 250R turn signals. The front signals you have look awesome! Great work on the restoration project.
	1 out of 1 members found this post helpful.

July 2nd, 2014, 08:20 PM	#72
Hero Danny Inline 4!!! Name: Danny Location: MA Join Date: May 2014 Motorcycle(s): 2008 CBR600rr, 1987 KLR 250 Posts: A lot.	I think the vinyl may be too much. Maybe you could do the mirrors orange, or do some integrated orange turn signals in your mirrors. Or like you said, maybe just a slightly thinner piece of vinyl. Like maybe half as big as the one you did. __________________________________________________ Be careful. Remember you are invisible

July 4th, 2014, 10:41 AM	#74
verboten1 ninjette.org certified postwhore Name: Jason Location: Monroe, MI Join Date: May 2013 Motorcycle(s): '75 CB550:.'82 XV920:.'00 KLR650:.'00 EX250:.'08 Ninja 250 Posts: A lot. MOTM - June '15	Another try! __________________________________________________ '82 XV920: Soon to be tracker--'00 KLR685:adv --'04 DRZ400E--'12 Super Tenere --'13 Versys Ride more, worry less.

July 28th, 2014, 08:18 AM	#76
verboten1 ninjette.org certified postwhore Name: Jason Location: Monroe, MI Join Date: May 2013 Motorcycle(s): '75 CB550:.'82 XV920:.'00 KLR650:.'00 EX250:.'08 Ninja 250 Posts: A lot. MOTM - June '15	Clone trooper actually...but yeah, the wife kind of suggested it. One of the last things I plan on doing is a front brake upgrade. __________________________________________________ '82 XV920: Soon to be tracker--'00 KLR685:adv --'04 DRZ400E--'12 Super Tenere --'13 Versys Ride more, worry less.

September 17th, 2014, 09:08 AM	#77
verboten1 ninjette.org certified postwhore Name: Jason Location: Monroe, MI Join Date: May 2013 Motorcycle(s): '75 CB550:.'82 XV920:.'00 KLR650:.'00 EX250:.'08 Ninja 250 Posts: A lot. MOTM - June '15	Added a new toy to the bike, SJCam SJ4000 1080P, I put a 32 GB card in, the wife and I are riding across the Mackinaw Bridge, I'll be recording her! __________________________________________________ '82 XV920: Soon to be tracker--'00 KLR685:adv --'04 DRZ400E--'12 Super Tenere --'13 Versys Ride more, worry less.

October 13th, 2014, 09:29 PM	#79
Klondike1020 Intrepid Adventurer Name: Josh Location: Rochester/Buffalo NY Join Date: Jan 2012 Motorcycle(s): 2004 GSXR 750 , 71 cb350streettracker, 07 Polaris Predator 500 Posts: A lot.	HAHA you have gone so far with this bike so quickly. GREAT JOB. it is coming out awsome I want to see a pic of how you put the LEDS on it __________________________________________________ LIFE IS NOT FOR REGRETS OR EXCUSES. Breath deep, seek peace. Embrace the Madness. Life is good, let it be Last futzed with by Klondike1020; October 19th, 2014 at 08:35 AM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Ninja 250 trike project	4950cycle	Pictures	40	November 18th, 2016 01:08 PM
Wtb Ninja 250 project bike jn CA	chugs	Items Wanted	0	October 31st, 2013 08:29 PM
Wtb: Project ninja 250 + parts	5evenz	Items Wanted	2	April 19th, 2012 10:40 PM
Newest Ninja in Philadelphia, PA	Shwig	New Members	23	December 15th, 2011 02:28 PM
2000 ninja 250 project/parts 600obo	porschepatrick912	Motorcycle-related	5	January 18th, 2010 04:08 PM