ninjette.org

Go Back   ninjette.org > General > Ninjettes At Speed

Reply
 
Thread Tools
Old February 8th, 2015, 06:50 PM   #1
stimpee
ninjette.org member
 
Name: Steve
Location: Gallatin TN
Join Date: Aug 2013

Motorcycle(s): 1 2005 Ninja EX250, 1 2008 Ninja 250, 1 2009 Ninja 250

Posts: 37
Race/Track Ninja 250 value

I am preparing to sell two Ninjettes, one pre-gen and one new gen. As the 300 is becoming more popular, does anybody have any guidance on reasonable values for these bikes? Both have been raced in FL CCS (the pre-gen only very briefly) and are well prepped and track ready, although both have stock suspensions.

Trying to sell to help fund my son moving to an SV650 (or maybe KTM 390 if they take a while to sell).


Any guidance would be appreciated!
stimpee is offline   Reply With Quote




Old February 8th, 2015, 07:13 PM   #2
Sirref
Private Joker
 
Sirref's Avatar
 
Name: Ben
Location: Towson, MD
Join Date: Nov 2012

Motorcycle(s): '99/'01 Ninja 250 "sketchy", '13 Ninja 300 "yoshi", '03 GSXR 600 "merlin"

Posts: A lot.
MOTM - Mar '14
depends, the pregen won't be worth much if it doesn't have 17" wheels so ~$1000 if it's able to be street legal easily. The newgen I'd say around $2,000-3,000 depending on condition and what's been done to it. These are prices in my area though which may be very different to FL prices

check the wera classifieds
__________________________________________________
I see you over there seeing me, do you see the me I think you see?
https://www.ninjette.org/forums/signaturepics/sigpic12146_1.gif
Sirref is offline   Reply With Quote


Old February 8th, 2015, 07:56 PM   #3
stimpee
ninjette.org member
 
Name: Steve
Location: Gallatin TN
Join Date: Aug 2013

Motorcycle(s): 1 2005 Ninja EX250, 1 2008 Ninja 250, 1 2009 Ninja 250

Posts: 37
Hasn't been too much going by on the classifieds for WERA or CCS recently.

The pre-gen has woodcraft clip ons, rearset brackets, full Muzzy exhaust. Can be converted back to street easily. Was hoping it could bring a bit more than that, but that is probably realistic since most don't want to run the old bike anymore.

The newgen is nice and is setup better than my newgen right now, and runs consistent top fives and a decent number of podiums in FL. But again it seems like prices are dropping due to the 300s, so trying to figure out a good asking price to move it. It has woodcraft clip ons, yosh rearset brackets, Tyga exhaust (I think it is), Pit-eck bodywork, quick-turn throttle, is jetted and is among the quickest of the FL "spec" bikes.

I have it listed on the STT forum and am just at the threshold of post count here to prepare to list it I think...
stimpee is offline   Reply With Quote


Old February 9th, 2015, 05:46 AM   #4
csmith12
The Corner Whisperer
 
csmith12's Avatar
 
Name: Chris (aka Reactor)
Location: Northern KY
Join Date: May 2011

Motorcycle(s): 2010 250 (track), 1992 250, 2006 R6 (street/track), 2008 R6 (track)

Posts: Too much.
MOTY 2015, MOTM - Nov '12, Nov '13
A few pics would help. As far as street prices go, CL will give you a ballpark. Sadly the aftermarket bits will not bump the price up that much. Stock newgens can go for as little as $2k round my parts as well as the pregens for about $1000-$1300.
csmith12 is offline   Reply With Quote


Old February 9th, 2015, 10:33 AM   #5
cuong-nutz
RIP Alex
 
cuong-nutz's Avatar
 
Name: Cuong
Location: Houston, TX
Join Date: Apr 2011

Motorcycle(s): '10 250r, '09 265r

Posts: A lot.
Blog Entries: 2
Quote:
Originally Posted by csmith12 View Post
A few pics would help. As far as street prices go, CL will give you a ballpark. Sadly the aftermarket bits will not bump the price up that much. Stock newgens can go for as little as $2k round my parts as well as the pregens for about $1000-$1300.
Same here in Texas.
__________________________________________________
HalfFast Racing Team
Serving Greater Houston Area Riders:WFO Riders MotoHouston HPC CMRA Ride Smart Fastline Lone Star Track Days
cuong-nutz is offline   Reply With Quote


Old February 9th, 2015, 12:09 PM   #6
stimpee
ninjette.org member
 
Name: Steve
Location: Gallatin TN
Join Date: Aug 2013

Motorcycle(s): 1 2005 Ninja EX250, 1 2008 Ninja 250, 1 2009 Ninja 250

Posts: 37
Pre-gen Bike Pics:

https://api.viglink.com/api/click?fo...OrMYa%3Fdl%3D0

New Gen Bike Pics

https://api.viglink.com/api/click?fo...JiEda%3Fdl%3D0

Thanks for the input so far...

Last futzed with by stimpee; February 25th, 2015 at 01:05 PM.
stimpee is offline   Reply With Quote


Old February 25th, 2015, 10:50 AM   #7
Foxrider64
Hello Moto
 
Foxrider64's Avatar
 
Name: Alex
Location: Ft. Myers
Join Date: Mar 2013

Motorcycle(s): 1975 RD350; 2001 KX125; 2003 Z1000; 2003 KDX50; 2009 ZX6R; 2011 Ninja 250R; 2014 KX250F

Posts: 352
Links don't work Steve- giving a Error 404.


I still see new gens in street trim with 15k miles listed at $3,000. With race trim and and clean title expect to get no more than that. Without a title $2,000 is fair for a race built.

The pregren- My suggestion is sell the nice bits on forums or ebay and sell the remainder as a street bike missing parts or put the stock pieces back on. A race ready or modified pregen brings no added value as they are not as competitive anymore. Some who would buy it as a street bike doesn't care about performance parts and only wants something that can take a beating.
Foxrider64 is offline   Reply With Quote


Old February 25th, 2015, 01:07 PM   #8
stimpee
ninjette.org member
 
Name: Steve
Location: Gallatin TN
Join Date: Aug 2013

Motorcycle(s): 1 2005 Ninja EX250, 1 2008 Ninja 250, 1 2009 Ninja 250

Posts: 37
Whoops. Fixed links in my for sale threads but not here. They should work now.

I have gotten some interest in the muzzy exhaust, so maybe I should sell that, and the clip ons separately, and then sell the bike for street. The biggest problem is that I need to do some "work' on it to do that, and since I am home only three days every few weeks, that is difficult!

Thanks for the input though.

Steve
stimpee is offline   Reply With Quote


Reply




Similar Threads
Thread Thread Starter Forum Replies Last Post
Parting Out :: 08+ Ninja 250 Track/Race Bike abhijitz Motorcycle-related 14 May 10th, 2014 07:32 AM
New-Gen Ninja 250 Race/Track Tires abhijitz Motorcycle-related 2 April 13th, 2014 03:14 PM
WTB : 08+ Ninja 250 Race/Track Stuff abhijitz Items Wanted 0 November 13th, 2011 04:45 PM
My track/race 250 'build' switch Ninjettes At Speed 14 April 22nd, 2010 04:45 PM



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


Motorcycle Safety Foundation

All times are GMT -7. The time now is 03:20 PM.


Website uptime monitoring Host-tracker.com
Powered by vBulletin®
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
User Alert System provided by Advanced User Tagging (Lite) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
Except where otherwise noted, all site contents are © Copyright 2022 ninjette.org, All rights reserved.