July 20th, 2021, 12:36 PM | #1 |
Board Member
Name: ...
Location: WI
Join Date: Dec 2011 Motorcycle(s): 250R (street), 250R (dirt) Posts: A lot.
|
FS 2009 Kawasaki Ninja 250
Currently located around Sarasota, FL.
17,XXX Miles Clear and Clean Title No Accidents and never down Maintained EXTREMELY well All stock and spare parts that I have will be given to the buyer as well. There are way too many to list, but I can think of: Stock carbs, spare sprockets, spark plugs, gaskets, rearsets, some crank bearings, other random bearings, some bolts, K&N pod filter, many jets and much more! ASKING PRICE $5000 Will post current pics soon. Summary of Motorcycle: Suspension Forks were redone and optimized by Ed Sorbo of Lindemann Engineering (Ed also added fork drains at the bottom of the forks so I can do oil changes w/o removing the forks.) SSR Preload caps Penske triple with LE valving and short reservoir hose (will mount to battery box) Springs front and rear are based on my weight and riding style. 2010 Aluminum shock triangle for less weight! SSR preload caps Ignition BRT-is NGK CR8EIX plugs Takai Racing Coils Engine APE Ported head with +1.5mm intake valves APE custom springs New guides, seals and retainers Falicon ultra light crank mods Falicon gram matched, shot peened and polished rods with bronze bushings JE 13.5:1 pistons +2mm BEET cams both intake and exhaust newer cam chain newer cam chain tensioner ISF polished transmission gears Worldwide ceramic transmission bearings Custom SS oil line Newer water pump and hoses Nikasil cylinder coating Thermobob 3 Engine EGR block off plates Lots of new seals, gaskets and consumables Fuel/Intake CR31 carbs full complement of jetting Ported stock airbox heat shield added to rear of engine for cooler air heat shield added to underside of gas tank Exhaust Leo Vince carbon superbike exhaust with custom header flanges that perfectly match the head and pipe for superior flow (I don't need to use gaskets). Pics elsewhere NGK A/F ratio gauge installed Frame and Controls Motion Pro VR Throttle (50mm cam) Motion Pro Right Cluster Switch Heated Grips WC Clip-ons Stainless bolts where I could easily replace Aluminum gas cap bolts, full aluminum race spec engine kit from ProBolt, AL sprocket nuts, TI brake bolts, TI oil drain bolt Lightech Rearsets Ohlins damper with BEET mount Brakes @rojoracing53 modified rear brake rotor (shaved off 13 oz or so!!!) @rojoracing53 modified rear brake hanger (captive) Braking full floating front rotor Vesrah SJRL front pads SS brake lines (both custom) Brembo RCS15 radial master, reservoir, and custom bracket Rear reservoir delete Other Fun Stuff Newer tires MicroBlue Ceramic Wheel Bearings New sprockets with a 520 non-oring chain (15/43) Engine Ice high performance coolant (no mixing) Yoshimura Fender eliminator Fully safety wired past WERA/AMA specs Kawasaki DB windscreen Spears Racing Chain Holder Battery Tender Super Bright Full LED tail light Captive front wheel spacers (eliminates speedo) Probably more that I am missing. Truly a sight to see!!! |
|
July 20th, 2021, 08:05 PM | #2 |
Board Member
Name: ...
Location: WI
Join Date: Dec 2011 Motorcycle(s): 250R (street), 250R (dirt) Posts: A lot.
|
Pics
|
|
July 20th, 2021, 08:07 PM | #3 |
Board Member
Name: ...
Location: WI
Join Date: Dec 2011 Motorcycle(s): 250R (street), 250R (dirt) Posts: A lot.
|
More pics
|
|
April 7th, 2022, 11:13 AM | #4 |
Board Member
Name: ...
Location: WI
Join Date: Dec 2011 Motorcycle(s): 250R (street), 250R (dirt) Posts: A lot.
|
BUMP
|
|
September 15th, 2022, 10:53 AM | #5 |
Board Member
Name: ...
Location: WI
Join Date: Dec 2011 Motorcycle(s): 250R (street), 250R (dirt) Posts: A lot.
|
BUMP
Now located in Sarasota, FL. I'll drop price to $4500 If no serious offers, I may part it. |
|
October 11th, 2022, 02:01 PM | #6 |
Board Member
Name: ...
Location: WI
Join Date: Dec 2011 Motorcycle(s): 250R (street), 250R (dirt) Posts: A lot.
|
Anyone want parts? If I can get buyers for the major items, I’ll part it.
Motor Frame Suspension Otherwise $4250 is pretty darn low for this thing |
|
October 31st, 2022, 09:27 AM | #7 |
Board Member
Name: ...
Location: WI
Join Date: Dec 2011 Motorcycle(s): 250R (street), 250R (dirt) Posts: A lot.
|
$4000 for the bike is as low as I can go.
Wont find a better deal anywhere on such a nice bike. Last futzed with by mgentz; December 1st, 2022 at 07:43 AM. |
|
October 31st, 2022, 05:33 PM | #8 |
dirty boy
Name: Joe
Location: Johnstown, PA
Join Date: Sep 2012 Motorcycle(s): I don't even know anymore?? Posts: A lot.
MOTM - Apr '14
|
It's unfortunate but next to no one wants to pay premium for a tricked out ex250. Not sure what the 250cc racing scene is like these days either with all the small displacement increases in new bikes over the years.
When I sold my 250 I ended up tearing it down and trying to turn it back to stock as much as i could and sell off the extras separately but I didn't really have any engine work either though. Tough market, good luck man.
__________________________________________________
I love the smell of burning pre-mix in the morning I don't think I'm a lot dumber than you thought that I think that I thought I was once. |
|
October 31st, 2022, 06:22 PM | #9 |
Board Member
Name: ...
Location: WI
Join Date: Dec 2011 Motorcycle(s): 250R (street), 250R (dirt) Posts: A lot.
|
I would part it out if I could find someone that wants the major parts. I would even strip it down to as much of stock as I could, if I had a buyer for some of the “race” parts. I’m open to options.
However, if someone wants the whole thing, they will get one heck of a machine |
1 out of 1 members found this post helpful. |
November 2nd, 2022, 04:40 AM | #10 |
ninjette.org member
Name: Topaz
Location: South Florida
Join Date: Mar 2017 Motorcycle(s): 2013 Ninja 300 / Suzuki DR-Z 400 SM Posts: 214
|
Beautiful bike! What a shame to have to part it out.
|
|
November 2nd, 2022, 11:19 AM | #11 |
Board Member
Name: ...
Location: WI
Join Date: Dec 2011 Motorcycle(s): 250R (street), 250R (dirt) Posts: A lot.
|
I would like for it to go to a good home!
Also, I cannot edit my original post, but I am now located in Sarasota, FL. Hopefully that helps!!! |
|
November 2nd, 2022, 11:42 AM | #12 |
ninjette.org guru
Name: Drew
Location: SoCal
Join Date: Jul 2013 Motorcycle(s): 2007 SV650S 2005 EX250F Posts: 487
|
I would love to take over ownership if I actually had any need of it
That's the same paint scheme as my wife's old new-gen we had back in the day. I like the new-gen 250s but they're obsolete like everything nowadays. I'm just steady rolling with my moldy-oldie first-gen.
__________________________________________________
Don't think, look! |
|
November 2nd, 2022, 02:49 PM | #13 |
ninjette.org dude
Name: 1 guess :-)
Location: SF Bay Area
Join Date: Jun 2008 Motorcycle(s): '13 Ninja 300 (white, the fastest color!), '13 R1200RT, '14 CRF250L, '12 TT-R125LE Posts: Too much.
Blog Entries: 7
|
Edited.
__________________________________________________
Montgomery Street Motorcycle Club / cal24.com / crf250l.org / ninjette.org ninjette.org Terms of Service Shopping for motorcycle parts or equipment? Come here first. The friendliest Ninja 250R/300/400 forum on the internet! (especially Unregistered) |
|
November 3rd, 2022, 10:55 AM | #14 |
ninjette.org certified postwhore
Name: AKA JacRyann
Location: Mesa, AZ
Join Date: Dec 2011 Motorcycle(s): CB125T CBR250R-MC19 CBR250RR-MC22 NSR350R-MC21 VF500F CBR600RR SFV650 VFR750F R1M ST1300PA Valkyrie-F6C Posts: A lot.
MOTY - 2018, MOTM - Nov '17
|
Seems race-bikes are moving pretty good on various FB groups. I've had several get sold before I even had chance to contact seller.
|
|
November 3rd, 2022, 05:45 PM | #15 |
dirty boy
Name: Joe
Location: Johnstown, PA
Join Date: Sep 2012 Motorcycle(s): I don't even know anymore?? Posts: A lot.
MOTM - Apr '14
|
race scene should be decent in Florida, should definitely help a bit.
__________________________________________________
I love the smell of burning pre-mix in the morning I don't think I'm a lot dumber than you thought that I think that I thought I was once. |
|
November 6th, 2022, 02:38 PM | #16 |
Board Member
Name: ...
Location: WI
Join Date: Dec 2011 Motorcycle(s): 250R (street), 250R (dirt) Posts: A lot.
|
|
|
November 6th, 2022, 02:39 PM | #17 |
Board Member
Name: ...
Location: WI
Join Date: Dec 2011 Motorcycle(s): 250R (street), 250R (dirt) Posts: A lot.
|
|
1 out of 1 members found this post helpful. |
November 6th, 2022, 02:46 PM | #18 |
Guy Who Enjoys Riding
Name: Jim
Location: North Carolina
Join Date: Jul 2016 Motorcycle(s): Ninja 250 Posts: A lot.
MOTM - Oct '18, Aug '17, Aug '16
|
|
|
November 30th, 2022, 01:09 PM | #19 |
Board Member
Name: ...
Location: WI
Join Date: Dec 2011 Motorcycle(s): 250R (street), 250R (dirt) Posts: A lot.
|
Any takers....? Whole bike, engine, suspension, etc?
|
|
December 1st, 2022, 07:44 AM | #20 |
Board Member
Name: ...
Location: WI
Join Date: Dec 2011 Motorcycle(s): 250R (street), 250R (dirt) Posts: A lot.
|
|
|
December 1st, 2022, 08:42 PM | #21 |
ninjette.org member
Name: ROB
Location: WORCESTER
Join Date: Oct 2014 Motorcycle(s): 08 NINJA 250,EX500,YSR50,86 VFR750 Posts: 54
|
How much for motor? Also how much for the carbs?
|
|
December 2nd, 2022, 06:04 AM | #22 |
Board Member
Name: ...
Location: WI
Join Date: Dec 2011 Motorcycle(s): 250R (street), 250R (dirt) Posts: A lot.
|
Another member here told me $2000. That sounds fair to me.
Carbs for $300 with the motor. I would include my spare jets as well. |
|
April 14th, 2023, 05:02 PM | #23 | |
Board Member
Name: ...
Location: WI
Join Date: Dec 2011 Motorcycle(s): 250R (street), 250R (dirt) Posts: A lot.
|
Quote:
Otherwise willing to let the whole thing go for $3000 at this point. I need it gone. Last futzed with by mgentz; April 17th, 2023 at 09:34 AM. |
|
|
April 17th, 2023, 03:46 PM | #24 |
Board Member
Name: ...
Location: WI
Join Date: Dec 2011 Motorcycle(s): 250R (street), 250R (dirt) Posts: A lot.
|
$3000 for this is a great deal. A track ready weapon or a 50mpg street bike. This thing is both.
|
|
July 13th, 2023, 06:38 AM | #25 |
Board Member
Name: ...
Location: WI
Join Date: Dec 2011 Motorcycle(s): 250R (street), 250R (dirt) Posts: A lot.
|
Nobody is in for $3000? What would someone on here pay?
|
|
September 30th, 2023, 05:58 PM | #26 |
Board Member
Name: ...
Location: WI
Join Date: Dec 2011 Motorcycle(s): 250R (street), 250R (dirt) Posts: A lot.
|
How about $2300. Bike Only. Does that get anyone's attention?
PM me if interested and come pick this thing up. |
|
October 1st, 2023, 07:15 AM | #27 |
ninjette.org certified postwhore
Name: Gordon
Location: new york
Join Date: Sep 2009 Motorcycle(s): '95 DUCATI 900SS/SP '07 DUCATI SS800 '19 HONDA CBR650R Posts: A lot.
MOTM - Nov '18, Mar '17
|
I'll submit you are an obvious victim of the current radical economic downturn.
__________________________________________________
Custom Carb Service |
|
October 1st, 2023, 03:17 PM | #28 |
Board Member
Name: ...
Location: WI
Join Date: Dec 2011 Motorcycle(s): 250R (street), 250R (dirt) Posts: A lot.
|
It appears I am.
I just sold that bike locally for all of $2500. With $15,000+ into it, including the original purchase price, I am a little sad that it took that much to give away such a great bike. Oh well....Look for a spare parts thread to show up soon. At least others should be able to purchase my spares for cheap to keep their bikes running! MODERATORS - Please mark as sold. |
|