January 22nd, 2015, 09:18 PM | #1 |
ninjette.org member
Name: Lucas
Location: vietnam
Join Date: Oct 2014 Motorcycle(s): ninja 250 Posts: 83
|
do i have the stock piping?
hi. i bought a used ninja and i was wondering if this looks
like the stock piping? I just want to know before I order a slip on exhaust thanks. and is anyone against me getting a Growler exhaust?? |
|
January 22nd, 2015, 09:29 PM | #2 |
The Corner Whisperer
Name: Chris (aka Reactor)
Location: Northern KY
Join Date: May 2011 Motorcycle(s): 2010 250 (track), 1992 250, 2006 R6 (street/track), 2008 R6 (track) Posts: Too much.
MOTY 2015, MOTM - Nov '12, Nov '13
|
That doesn't look like stock to me. I don't care what can you get but can you take a pick that shows the can connection points? Midpipe and how it connects to the rear? It will have a wrap around the can using the stock pillion pegs or a custom bracket. That will answer your question.
__________________________________________________
Goal: Shake A Million Hands | Look through the corners | Track Day Prep | Closest track? | The Mid-Ohio School |
|
January 23rd, 2015, 08:44 AM | #4 |
ninjette.org member
Name: Matthew
Location: Hutchinson Minnesota
Join Date: Sep 2014 Motorcycle(s): Green Ninja 250 2008 Posts: 66
|
Just by the look at the end of the pipe it does not look like stock. If you are looking to get a slip on and not buy the full system a cheap option would to be to do what I did. Find a cheap exhaust manifold on ebay for 50 USD, and install that. From there you can buy any slip on.
|
|
January 26th, 2015, 04:36 AM | #5 |
ninjette.org member
Name: Lucas
Location: vietnam
Join Date: Oct 2014 Motorcycle(s): ninja 250 Posts: 83
|
Hey thanks guys, I looked underneath a bit and yeah you're right, that exhausted was welded on.
without starting another thread, my engine light and temperature light has been staying on for about 20 seconds right after I start the bike up. Usually it stays on and then shuts off immediately. After that it shuts off and doesn't show up again. Any ideas? The oil was changed less than 300 miles ago and this started happening after a long drive of about 50 miles. |
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Removing Exhaust/'Straight' Piping a Ninja 250??? | gilmorec61 | 2008 - 2012 Ninja 250R Tech Talk | 5 | February 2nd, 2012 10:12 PM |
FS: 08+ Yosh CF Slipon, Stock Headers, Stock Brake Lines, Stock Rearsets | Dmitriy | Motorcycle-related | 16 | August 24th, 2011 11:03 AM |
Stock tire, airbox, passenger pegs, stock right rearset, cowl shroud | ninja250 | Motorcycle-related | 6 | August 17th, 2011 10:33 AM |
WANTED: 2008+ Stock rear links and stock handlebar bolts | WesleyMarz | Items Wanted | 2 | July 14th, 2011 06:36 PM |
exhaust piping diameter? | J Walk | 2008 - 2012 Ninja 250R Tech Talk | 1 | February 9th, 2011 06:09 PM |
|
|