April 13th, 2013, 06:21 PM | #1 |
ninjette.org member
Name: Nasty
Location: East Bay - CA
Join Date: Jan 2013 Motorcycle(s): 2013 Ebony Ninja 300 Posts: 55
|
How to design motorcycle fairings
Does anybody know a good program to design fairings?
I remember seeing something where you can design around the holes, curves and grooves on the "3D" image and at the same time, a "flat" image is generated. What is this program called? Also, are there any other ways of designing them?
__________________________________________________
-Need tips/have tips to give on buying a new bike? Visit my thread. Add your input! http://www.ninjette.org/forums/showthread.php?t=122975 |
|
April 13th, 2013, 06:39 PM | #2 | |
Daily Ninjette rider
Name: Hernan
Location: Florida
Join Date: Mar 2011 Motorcycle(s): 2007 Ninja 250 Posts: A lot.
MOTY - 2016, MOTM - Dec '12, Jan '14, Jan '15, May '16
|
Quote:
http://en.wikipedia.org/wiki/Autocad http://en.wikipedia.org/wiki/Solidworks First one is free and does the 3D to flat transfer that you want
__________________________________________________
Motofool .................................Never ride faster than your guardian angel can fly "Mankind is composed of two sorts of men — those who love and create, and those who hate and destroy. Love is the bond between men, the way to teach and the center of the world." - José Martí |
|
|
April 14th, 2013, 11:14 PM | #3 | |
ninjette.org member
Name: Nasty
Location: East Bay - CA
Join Date: Jan 2013 Motorcycle(s): 2013 Ebony Ninja 300 Posts: 55
|
Quote:
Now to find someone to design a model of a Ninja 300 on there!
__________________________________________________
-Need tips/have tips to give on buying a new bike? Visit my thread. Add your input! http://www.ninjette.org/forums/showthread.php?t=122975 |
|
|
April 18th, 2013, 05:26 PM | #4 |
CPT Falcon
Name: J.Emmett Turner
Location: Newnan, GA
Join Date: Apr 2009 Motorcycle(s): '08 CP Blue EX250J, '97 unpainted EX250F, 2nd '97 unpainted EX250F (no engine), '07 black EX250F Posts: A lot.
|
|
|
April 18th, 2013, 06:22 PM | #5 |
The Corner Whisperer
Name: Chris (aka Reactor)
Location: Northern KY
Join Date: May 2011 Motorcycle(s): 2010 250 (track), 1992 250, 2006 R6 (street/track), 2008 R6 (track) Posts: Too much.
MOTY 2015, MOTM - Nov '12, Nov '13
|
After you get them all designed up, you just need a 3d printer that can print with a abs mat.
__________________________________________________
Goal: Shake A Million Hands | Look through the corners | Track Day Prep | Closest track? | The Mid-Ohio School |
|