March 25th, 2021, 06:34 PM | #1 |
ninjette.org member
Name: Michael
Location: Vine Grove KY
Join Date: Mar 2021 Motorcycle(s): 2006 Kawasaki Ninja, Haulmaster Huskee UTV Posts: 19
|
2006 KEIHIN CVK Carb Main Fuel Inlet
Looking for this fitting that's missing from the carbs I have... any help would be greatly appreciated.
|
|
March 25th, 2021, 07:05 PM | #2 |
ninjette.org member
Name: Ben
Location: Lawrence
Join Date: Jul 2018 Motorcycle(s): 2007 ex250 (black), silver 2005 ex250 scrambler, 2003 ex250 donor bike, 2006 kymco people 250 Posts: 73
|
I think that fitting is pressed in, so if you find the right size fuel elbow, you should be able to press it in with some retaining compound. Do you have some calipers to measure the opening. The fuel line side is 3/8 I think.
There are people here who rebuild carb sets, they might also know. Ducatiman would be the one to ask. |
|
March 25th, 2021, 08:43 PM | #3 |
ninjette.org member
Name: Michael
Location: Vine Grove KY
Join Date: Mar 2021 Motorcycle(s): 2006 Kawasaki Ninja, Haulmaster Huskee UTV Posts: 19
|
@Artruck, yeah I had noticed that there wasn't any threads on the carb body. I'll check around parts stores to see if I can get anything to work. Just wanted to see if anyone might have that fitting they'd be willing to let go of before I rig something.
|
|
March 26th, 2021, 05:47 AM | #5 |
ninjette.org member
Name: Michael
Location: Vine Grove KY
Join Date: Mar 2021 Motorcycle(s): 2006 Kawasaki Ninja, Haulmaster Huskee UTV Posts: 19
|
@Triple Jim, I’ve asked @ducatiman and he says he doesn’t have one. Worse comes to worse I can make something work. This entire project is literally “making something work” lol. I did have a tangent question, the petcock for these ninjas, are they just a vacuum fuel flow function or does it have a pump built in?
__________________________________________________
No Bad Days |
|
March 26th, 2021, 05:58 AM | #6 |
ninjette.org certified postwhore
Name: Gordon
Location: new york
Join Date: Sep 2009 Motorcycle(s): '95 DUCATI 900SS/SP '07 DUCATI SS800 '19 HONDA CBR650R Posts: A lot.
MOTM - Nov '18, Mar '17
|
OEM petcock is vacuum actuated (on-off) but gravity fed.
link to a 1 piece brass elbow https://www.ebay.com/itm/Brass-Fuel-...A/223964728113 You had previously asked if I *have* one, not where to get one. The one I've linked is a 1 piece brass elbow.
__________________________________________________
gordon@customcarbservices.com Custom Carb Service www.customcarbservices.com |
1 out of 1 members found this post helpful. |
March 26th, 2021, 06:10 AM | #7 |
ninjette.org member
Name: Michael
Location: Vine Grove KY
Join Date: Mar 2021 Motorcycle(s): 2006 Kawasaki Ninja, Haulmaster Huskee UTV Posts: 19
|
My mistake, didn’t realize that needed to be separate inquiry. Either way, thank you for the link.
__________________________________________________
No Bad Days |
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
KEIHIN Carb Main Fuel Inlet Fitting | myates92 | 1986 - 2007 Ninja 250R Tech Talk | 1 | March 26th, 2021 05:52 AM |
CARB Dropped and Busted Fuel Inlet - Suggestions? | Road Dawg1 | 2008 - 2012 Ninja 250R Tech Talk | 9 | July 18th, 2014 07:12 PM |
|
|