August 10th, 2016, 05:23 PM | #1 |
ninjette.org member
Name: J
Location: Washington, dc
Join Date: Aug 2016 Motorcycle(s): '08 Ninja 250 Posts: 18
|
What piece went missing?
I have a hole in my handlebar. I've never noticed what went there before. It looks like it should fit a bolt. On the right side there's a plug of some sort in (almost) the same place. So - what am I missing? Where/how do I replace it? How bad is it that it's missing? It rained the other day and I'm not sure when I lost it, did I be concerned about water getting... somewhere?
|
|
August 10th, 2016, 05:26 PM | #2 |
The Corner Whisperer
Name: Chris (aka Reactor)
Location: Northern KY
Join Date: May 2011 Motorcycle(s): 2010 250 (track), 1992 250, 2006 R6 (street/track), 2008 R6 (track) Posts: Too much.
MOTY 2015, MOTM - Nov '12, Nov '13
|
Welcome J!
Sounds like your missing a bar end. If so, then there are no real worries.
__________________________________________________
Goal: Shake A Million Hands | Look through the corners | Track Day Prep | Closest track? | The Mid-Ohio School |
|
August 10th, 2016, 05:28 PM | #3 |
Vintage Screwball
Name: B
Location: Washington
Join Date: Feb 2016 Motorcycle(s): 2011 Ninja 250, 2008 Ninja 250, 2019 KTM 1290SDR, 2017 FZ10 Posts: A lot.
MOTM - Mar '16
|
Those plastic plugs are where mirrors could mount but aren't used on the Ninjette's
Don't worry about it.
__________________________________________________
Goin' fast on slow bikes! |
2 out of 2 members found this post helpful. |
August 10th, 2016, 05:30 PM | #4 |
n00bie to wannabie
Name: Bill
Location: St Ives, BC (Shuswap Lake)
Join Date: Sep 2015 Motorcycle(s): 2012 250R (Red), 2005 VFR800A (Red), CRF450X (Red), 2012 F800GS (Wants to be Red!) Posts: A lot.
MOTM - Nov '15
|
Welcome J!
My memory is a little rusty but if I recall correctly; mine has those too. But; someone will be along soon to give you the correct answer. That's one of the great things about this forum: the people & quality info are incredibly good and friendly!
__________________________________________________
The Smart Money: #1 - ATGATT, #2 - Training (machine skills and survival skills), #3 - The bike; whatever floats yer boat with the money you have left over |
|
August 10th, 2016, 05:31 PM | #5 |
ninjette.org certified postwhore
Name: Whodat
Location: Ware Is.,MA
Join Date: Jan 2009 Motorcycle(s): I pass the wind! Posts: A lot.
MOTM - Mar '13, Jun '14
|
I believe that's where the cup holder goes.
__________________________________________________
If everything seems under control; you're just not going fast enough! |
3 out of 3 members found this post helpful. |
August 10th, 2016, 05:33 PM | #6 |
The Corner Whisperer
Name: Chris (aka Reactor)
Location: Northern KY
Join Date: May 2011 Motorcycle(s): 2010 250 (track), 1992 250, 2006 R6 (street/track), 2008 R6 (track) Posts: Too much.
MOTY 2015, MOTM - Nov '12, Nov '13
|
Dang! I was too fast with my reply. No worries here aside of a missing plug in the unused hole.
__________________________________________________
Goal: Shake A Million Hands | Look through the corners | Track Day Prep | Closest track? | The Mid-Ohio School |
|
August 10th, 2016, 05:39 PM | #7 |
n00bie to wannabie
Name: Bill
Location: St Ives, BC (Shuswap Lake)
Join Date: Sep 2015 Motorcycle(s): 2012 250R (Red), 2005 VFR800A (Red), CRF450X (Red), 2012 F800GS (Wants to be Red!) Posts: A lot.
MOTM - Nov '15
|
I think the OP tricked us into answering early (& wrong!): there were no pictures when I first read his post!!!
__________________________________________________
The Smart Money: #1 - ATGATT, #2 - Training (machine skills and survival skills), #3 - The bike; whatever floats yer boat with the money you have left over |
1 out of 1 members found this post helpful. |
August 10th, 2016, 06:18 PM | #8 |
ninjette.org member
Name: J
Location: Washington, dc
Join Date: Aug 2016 Motorcycle(s): '08 Ninja 250 Posts: 18
|
Awesome, thanks! And yeah, haha, I messed up the photo upload at first, but I thought I got it fixed faster than anyone could have looked at my thread.
Also, hi, I'm new ro the thread, been ridinf sbout a year, etc. I love how friendly and helpful ninja (and really all) riders are. |
|
August 10th, 2016, 06:46 PM | #9 |
Participant
Name: Dave
Location: South of Seattle
Join Date: Oct 2012 Motorcycle(s): '94 K75 std Posts: Too much.
MOTM - Aug '15
|
Welcome, J. Install that cup holder: you'll love it!
|
|
August 10th, 2016, 07:04 PM | #10 |
ninjette.org member
Name: Mike
Location: West palm beach, fl
Join Date: May 2015 Motorcycle(s): 96 ninja 250 Posts: 20
|
You can mount a RAM 1" ball mount there too, works well for gopro, cellphone holder, etc.
|
1 out of 1 members found this post helpful. |
August 10th, 2016, 08:05 PM | #11 |
Certified looney toon
Name: Teri
Location: 39°52'40.7"N 118°23'53.8"W (Northern NV)
Join Date: Jun 2012 Motorcycle(s): 2012 Ninja 250, 102k+ miles -- 2014 CB500X, 42k+ miles Posts: A lot.
Blog Entries: 16
MOTM Jul '13, Jul '14
|
It's meant for mirrors on some bikes, but works great for RAM balls to mount accessories (phone, gps, MP3 player).
__________________________________________________
<-- Linky Hey Unregistered! The code [you] shows the username currently logged in. IBA # 56020 AMA # 521481 Fun Rides! ][ My Videos ][ My Gear Hold yourself to the same rules you expect others to follow. |
|
August 10th, 2016, 08:14 PM | #12 |
The Corner Whisperer
Name: Chris (aka Reactor)
Location: Northern KY
Join Date: May 2011 Motorcycle(s): 2010 250 (track), 1992 250, 2006 R6 (street/track), 2008 R6 (track) Posts: Too much.
MOTY 2015, MOTM - Nov '12, Nov '13
|
You underestimate just how fast we are here.
__________________________________________________
Goal: Shake A Million Hands | Look through the corners | Track Day Prep | Closest track? | The Mid-Ohio School |
1 out of 1 members found this post helpful. |
August 10th, 2016, 08:20 PM | #13 |
Certifiable nontundrum
Name: Harper
Location: NC Milkshake stand
Join Date: Mar 2013 Motorcycle(s): 2013 SE NINJA 300 Posts: Too much.
MOTM - Sep '13, Sep '16
|
the thingy ain't in your whatchamajigger
__________________________________________________
|
|
August 10th, 2016, 08:52 PM | #14 |
n00bie to wannabie
Name: Bill
Location: St Ives, BC (Shuswap Lake)
Join Date: Sep 2015 Motorcycle(s): 2012 250R (Red), 2005 VFR800A (Red), CRF450X (Red), 2012 F800GS (Wants to be Red!) Posts: A lot.
MOTM - Nov '15
|
We're on 250's! Only in the corners. But; corners are where it counts!
__________________________________________________
The Smart Money: #1 - ATGATT, #2 - Training (machine skills and survival skills), #3 - The bike; whatever floats yer boat with the money you have left over |
1 out of 1 members found this post helpful. |
August 10th, 2016, 09:10 PM | #15 |
ninjette.org member
Name: J
Location: Washington, dc
Join Date: Aug 2016 Motorcycle(s): '08 Ninja 250 Posts: 18
|
That's a good idea for the Ram ball. I was also thinking something similar. Does anyone know what size bolt it takes?
|
|
August 10th, 2016, 09:38 PM | #16 |
ninjette.org certified postwhore
Name: Jason
Location: Monroe, MI
Join Date: May 2013 Motorcycle(s): '75 CB550:.'82 XV920:.'00 KLR650:.'00 EX250:.'08 Ninja 250 Posts: A lot.
MOTM - June '15
|
I believe the conicular rod attaches to the canooter valve there
__________________________________________________
'82 XV920: Soon to be tracker--'00 KLR685:adv --'04 DRZ400E--'12 Super Tenere --'13 Versys Ride more, worry less. |
1 out of 1 members found this post helpful. |
August 10th, 2016, 10:35 PM | #17 |
n00bie to wannabie
Name: Bill
Location: St Ives, BC (Shuswap Lake)
Join Date: Sep 2015 Motorcycle(s): 2012 250R (Red), 2005 VFR800A (Red), CRF450X (Red), 2012 F800GS (Wants to be Red!) Posts: A lot.
MOTM - Nov '15
|
Wrong end of the bike, silly!
__________________________________________________
The Smart Money: #1 - ATGATT, #2 - Training (machine skills and survival skills), #3 - The bike; whatever floats yer boat with the money you have left over |
1 out of 1 members found this post helpful. |
August 11th, 2016, 01:54 AM | #18 |
Knives
Name: Marlon
Location: Philippines
Join Date: May 2016 Motorcycle(s): Kawasaki Ninja 250 Posts: 3
|
|
|
August 11th, 2016, 09:56 AM | #19 | |
Certified looney toon
Name: Teri
Location: 39°52'40.7"N 118°23'53.8"W (Northern NV)
Join Date: Jun 2012 Motorcycle(s): 2012 Ninja 250, 102k+ miles -- 2014 CB500X, 42k+ miles Posts: A lot.
Blog Entries: 16
MOTM Jul '13, Jul '14
|
Quote:
The RAM-B-349U includes a M10 x 1.25 pitch male thread connected to a 1" rubber ball. And to give Dr Yeager a plug for how it looks - http://www.theyeagergroup.com/ninja_250_RAM_Mount.htm
__________________________________________________
<-- Linky Hey Unregistered! The code [you] shows the username currently logged in. IBA # 56020 AMA # 521481 Fun Rides! ][ My Videos ][ My Gear Hold yourself to the same rules you expect others to follow. |
|
|
August 11th, 2016, 10:42 AM | #20 |
Cat herder
Name: Gort
Location: A secret lair which, being secret, has an undisclosed location
Join Date: May 2009 Motorcycle(s): Aprilia RS660 Posts: A lot.
Blog Entries: 6
MOTM - Jul '18, Nov '16, Aug '14, May '13
|
It's an opportunity for farkling.
__________________________________________________
I am NOT an adrenaline junkie, I'm a skill junkie. - csmith12 Nam et ipsa scientia potestas est. Heri historia. Cras mysterium. Hodie donum est. Carpe diem. |
1 out of 1 members found this post helpful. |
August 11th, 2016, 10:44 AM | #21 |
Certifiable nontundrum
Name: Harper
Location: NC Milkshake stand
Join Date: Mar 2013 Motorcycle(s): 2013 SE NINJA 300 Posts: Too much.
MOTM - Sep '13, Sep '16
|
I want his suit ^
__________________________________________________
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Missing piece to my master link?! | mrudich | 1986 - 2007 Ninja 250R Tech Talk | 24 | October 10th, 2014 07:29 PM |
What else am I missing???? | userjh160 | General Motorcycling Discussion | 23 | October 2nd, 2012 08:50 AM |
2-piece vs 1-piece suit | zilaniz | Motorcycle Gear | 21 | July 13th, 2012 12:54 AM |
Am I missing a screw? | S14 | 2008 - 2012 Ninja 250R Tech Talk | 2 | April 22nd, 2011 07:01 AM |
Something's missing. | tinng321 | General Motorcycling Discussion | 15 | June 25th, 2009 01:00 PM |
|
|