What Did You Do to Your Ninjette Today ?? - Page 117

csmith12 · October 12th, 2013, 09:40 AM

Well, how bout this then. I plan to race the 250 class again next season, with the MotoSeries and MCRA, as many rounds as I can afford. I was kicking around racing the R6 but thought... there is still much to learn from the lil bike and I have learned so much thus far. I aint giving up until I get an elbow down. So I will keep the R6 in street clothes.

Winter plans;

Drum up some more sponsors (racin' aint cheap

)
Proper paint job
Proper dyno tune
A set of rain shoes
A spare set of wheels with tires (already have those

)
Install all my suspension parts
Clipons + spare bars
Spare rearsets
ect.. ect..

And the best part

, I got an old enclosed trailer that I am rebuilding. Along with the new truck, she gets a new trailer to ride in covered style. I just need something cool to paint or vinyl on the side. "Smith Family Racing" is already taken by a friend of mine, so need something different. Accepting any and all ideas.

She will come emerge of hibernation so fresh and so clean.

lgk · October 12th, 2013, 12:17 PM

Werd racing taken already?

csmith12 · October 12th, 2013, 12:24 PM

DUH!!!!!!! lol, taken or not, that is what's going on the side of the trailer.

IF13 · October 13th, 2013, 04:43 PM

Almost bought another mirror but realized I just needed the locking nuts. Also while dismantling the front, I realized I used the longer bolt that I needed for the bottom of the windshield for the gas tank bracket. So now I've got the windshield properly mounted and the mirror back in place.While doing this, I decided to finally clean off two months worth of NY grime and lube the chain.

Then I discovered a dent on a pipe that comes directly from the radiator...Yep not in the best motorcycle mood. I mean....Its been running for the past month without any flaws but that dents pretty severe. It pretty much cut the volume of coolant that can pass by half. Whether or not the bike's cooling system is compensating for this, I wouldn't know. But I'm hoping replacing this pipe isn't going to be difficult.

For anyone who cares, it's part number 39192 and it doesn't look like cake to replace it. Physically speaking. Logically, it just seems to get twisted on or something.

TheTraveler · October 13th, 2013, 05:13 PM

I didn't start today, but finished everything today as I prepare for a 4-5 day trip around California in 2 weeks.

- take the wheels off
- take it shop to mount the Pirelli Diablo Rosso II I bought online
- reinstall wheels
- align rear wheel
- adjust chains
- clean/lube chains
- change filter and oil (Rotella T6)
- wash bike

I took the tires to Bert's Mega Mall in Covina, CA to mount them. $20 for both tires, really cheap. Much cheaper than everywhere else ($50+). They balanced it too.

These tires already have 60 miles of break-in miles in them.

menikmati · October 13th, 2013, 05:38 PM

I got lucky at the gas station and got the pump that had residual gas from the last fill-up, coating my gas tank with gas.

Cleaned and lubed the chain. Cleaning in a chain is so much easier when it's done on a regular basis before it gets all loaded up with gunk.

mtbang · October 13th, 2013, 06:07 PM

After doing a lot of reading about changing the front to a 15T sprocket, I bit the bullet and swapped mine out. I think that was the most practical mod I have done thus far. I also put the CRG clutch/brake levers on, makes the reach a little better for me. Plus they look so much better than the stock levers.

JUSTiiE · October 13th, 2013, 08:20 PM

Serious question here...

...Okay. So I'm curious now as to how many speeds my 2011 Ninja has. Is it 5 speed or 6 speed. I've only gotten it up to 70 Mph, on 5th gear, and it sounds like and feels like there could be a 6th. But I'm scared to actually try and shift up and the clutch slip back in to 5th, and possibly screw something. Again I don't know crap about gears, clutches and what not. First motorcycle, first manual vehicle too. Help me out if you can?

tfkrocks · October 13th, 2013, 08:21 PM

Quote:

Originally Posted by JUSTiiE

Serious question here...

...Okay. So I'm curious now as to how many speeds my 2011 Ninja has. Is it 5 speed or 6 speed. I've only gotten it up to 70 Mph, on 5th gear, and it sounds like and feels like there could be a 6th. But I'm scared to actually try and shift up and the clutch slip back in to 5th, and possibly screw something. Again I don't know crap about gears, clutches and what not. First motorcycle, first manual vehicle too. Help me out if you can?

There are 6 gears. Trying to shift up when you're in the top gear won't hurt anything. I am guilty of doing that all the time

JUSTiiE · October 13th, 2013, 08:23 PM

Quote:

Originally Posted by tfkrocks

There are 6 gears. Trying to shift up when you're in the top gear won't hurt anything. I am guilty of doing that all the time

When I'm in Neutral is that considered a gear? I'm sure it's not but I wanna make sure that 100% about this before going on Interstates or Highways.

Example:

N
1(down)
2(up)
3(up)
4(up)
5(up)
6(end)

tfkrocks · October 13th, 2013, 08:25 PM

Quote:

Originally Posted by JUSTiiE

When I'm in Neutral is that considered a gear? I'm sure it's not but I wanna make sure that 100% about this before going on Interstates or Highways.

Gearing goes 1N23456. Neutral is not counted as a gear. You can go highway speeds in 5th gear although the bike will be screaming.

JUSTiiE · October 13th, 2013, 08:28 PM

Quote:

Originally Posted by tfkrocks

Gearing goes 1N23456. Neutral is not counted as a gear. You can go highway speeds in 5th gear although the bike will be screaming.

Screaming, hell. It'll be screaming for sure after tomorrow! New slip-on is gonna be in! Thanks for the tips too. I'm definitely pleased with this site thus far!

Thanks to all Ninjette'er(s)

JohnnyBravo · October 13th, 2013, 08:56 PM

Quote:

Originally Posted by JUSTiiE

Serious question here...

I shift my 300 into imaginary 7th all the time, when ya let the clutch out it rides just like it rode when ya pulled the clutch. It don't do nothing

Enjoy the ride

chugs · October 13th, 2013, 11:12 PM

Quote:

Originally Posted by tfkrocks

There are 6 gears. Trying to shift up when you're in the top gear won't hurt anything. I am guilty of doing that all the time

+2 I need to get a gear indicator. Spent today replacing spark plugs w/ new iridium plugs. Also charged up and installed my homemade lithium 11 oz battery. A ton of cranking amps and definitely lighter than the brick that was in there b4. Also, can someone id the exhaust on my bike, no label or decals on it?

tfkrocks · October 13th, 2013, 11:22 PM

Quote:

Originally Posted by chugs

+2 I need to get a gear indicator. Spent today replacing spark plugs w/ new iridium plugs. Also charged up and installed my homemade lithium 11 oz battery. A ton of cranking amps and definitely lighter than the brick that was in there b4. Also, can someone id the exhaust on my bike, no label or decals on it?

In my opinion, gear indicators are a lot of money for something entirely unnecessary. I'm too lazy to count when I'm getting up to highway speed since I know I'm just going to top gear anyway. Otherwise, I generally know what gear I'm in.

Nothing on the lip on the end? To me it looks like something Dan Moto makes.

NevadaWolf · October 13th, 2013, 11:49 PM

Added on a third of the miles I wanted in almost twice the time i needed.

But did go off roading a bit and above all else, any ride on the bike is a good day!

chugs · October 14th, 2013, 12:39 AM

Quote:

Originally Posted by tfkrocks

In my opinion, gear indicators are a lot of money for something entirely unnecessary. I'm too lazy to count when I'm getting up to highway speed since I know I'm just going to top gear anyway. Otherwise, I generally know what gear I'm in.

Nothing on the lip on the end? To me it looks like something Dan Moto makes.

Looks similiar to a danmoto but no dan moto logos anywhere.

tfkrocks · October 14th, 2013, 12:42 AM

Quote:

Originally Posted by chugs

Looks similiar to a danmoto but no dan moto logos anywhere.

Is it loud as hell? My next guess is cheap ebay **** lol.

chugs · October 14th, 2013, 01:03 AM

Quote:

Originally Posted by tfkrocks

Is it loud as hell? My next guess is cheap ebay **** lol.

Yeah, its pretty loud. lol I guess a similar replacement will be difficult to find!?

tfkrocks · October 14th, 2013, 01:24 AM

Quote:

Originally Posted by chugs

Yeah, its pretty loud. lol I guess a similar replacement will be difficult to find!?

Delkevics are the cheapest things that pop up on ebay and there are similar looking ones. You could just get something nicer too

IF13 · October 14th, 2013, 07:02 AM

Quote:

Originally Posted by tfkrocks

There are 6 gears. Trying to shift up when you're in the top gear won't hurt anything. I am guilty of doing that all the time

This.

I've attempted to shift up while at a fast speed hoping I'm still in fifth gear. But I'm not so I die a little inside.

Also, I parked by a bunch of SS bikes the other day. Seemed like this corner of the lot was meant for bicycles but have become a mix of whatever runs on two wheels.

As Im pulling out of the spot, there were two other bikers. One on a fireblade the other on an R6, felt like I was being downplayed when other people came up to them asking the R6er how he got that little usb thing installed.

JUSTiiE · October 15th, 2013, 07:45 AM

Got my Growler today!

Putting it on, and taking it for a test run!

cuong-nutz · October 15th, 2013, 07:50 AM

Quote:

Originally Posted by TheTraveler

I miss how good mine looked

Quote:

Originally Posted by chugs

+2 I need to get a gear indicator. Spent today replacing spark plugs w/ new iridium plugs. Also charged up and installed my homemade lithium 11 oz battery. A ton of cranking amps and definitely lighter than the brick that was in there b4. Also, can someone id the exhaust on my bike, no label or decals on it?

How much did that setup cost you?

Quote:

Originally Posted by JUSTiiE

Got my Growler today!
Putting it on, and taking it for a test run!

Save your hearing!

lgk · October 15th, 2013, 07:53 AM

Hope it came with a box of ear plugs, lol

JUSTiiE · October 15th, 2013, 07:53 AM

Quote:

Originally Posted by cuong-nutz

I miss how good mine looked

How much did that setup cost you?

Save your hearing!

Haha is it really all that loud?

cuong-nutz · October 15th, 2013, 07:55 AM

obnoxiously, and my hearing is shot too. Age may be a factor too lol.

JUSTiiE · October 15th, 2013, 08:03 AM

Quote:

Originally Posted by cuong-nutz

obnoxiously, and my hearing is shot too. Age may be a factor too lol.

Hmm, I guess we'll see. I'll look at investing in to some ear plugs if needed! I just hope the cops don't get called on me whenever I show up from work after 9 o'clock. Neighbor-hater exhaust!

chugs · October 15th, 2013, 11:52 AM

Quote:

Originally Posted by cuong-nutz

How much did that setup cost you?

Are u referring to the battery or the exhaust?

chillbr0412 · October 15th, 2013, 12:11 PM

Quote:

Originally Posted by JUSTiiE

Got my Growler today!

Putting it on, and taking it for a test run!

Nice! I'm planning to get one also

cuong-nutz · October 15th, 2013, 02:58 PM

Quote:

Originally Posted by chugs

Are u referring to the battery or the exhaust?

Sorry, I was referring to your battery.

tfkrocks · October 15th, 2013, 03:35 PM

Rode though some smoke on the road. I think something was burning at the center divide. Oh yeah and this is the first thing I've posted with my GoPro Hero3

Link to original page on YouTube.

chugs · October 15th, 2013, 04:44 PM

Quote:

Originally Posted by cuong-nutz

Sorry, I was referring to your battery.

It cost me about $55 for the lithium cells + hardware to to assemble it.

allanoue · October 15th, 2013, 08:10 PM

Oil change w/t6
Tried to find the mythical 7th gear without success. I will be sure to look for it again soon

JohnnyBravo · October 15th, 2013, 08:33 PM

Patted the tank, gave it a kiss on the ear, and said "soon my friend soon"

NevadaWolf · October 15th, 2013, 08:53 PM

Found a way to carry fuel!!

IF13 · October 15th, 2013, 09:35 PM

Quote:

Originally Posted by NevadaWolf

Found a way to carry fuel!!

Guess that's one way of looking like you're about to take a trip to the moon.

As for myself...Almost crashed. Didn't realize that the traffic ahead was so backed up. I must have hit the brakes too hard or at an angle but started fish tailing. Planting my left foot down as fast and as hard as I could trying to stabilize the bike while trying to find some sort of sweet spot with the brakes. Ended up right next to the car that was ahead of me but an inch or so before a curb (we were at a T intersection and thankfully the curb was curved to accommodate right turners).

I looked like I did the whole thing on purpose, took awhile for me to grasp what just happened then looked like I was on speed once I started looking very antsy at the 7/11 I stopped at after the near-accident.

Daks · October 16th, 2013, 02:07 AM

Planned a twisty ride on wildcat canyon rd and tested out my glove liners. Not exactly heated grips level of warmth but still a world of difference.

menikmati · October 16th, 2013, 08:12 AM

Placed an order for a bicycle floor pump because I don't check my tire pressures enough out of laziness.

Plan on getting 90 degree valve stems next tire change, have about 8.5k on my S20's and can still go about 1-1.5k more.

cuong-nutz · October 16th, 2013, 08:37 AM

Quote:

Originally Posted by menikmati

Placed an order for a bicycle floor pump because I don't check my tire pressures enough out of laziness.

Plan on getting 90 degree valve stems next tire change, have about 8.5k on my S20's and can still go about 1-1.5k more.

crap you got more out of your s20s than I did lol, I ran mine all the way down to the wire ~7.5k

menikmati · October 16th, 2013, 09:41 AM

Quote:

Originally Posted by cuong-nutz

crap you got more out of your s20s than I did lol, I ran mine all the way down to the wire ~7.5k

I have a couple of mm of tread until I hit the wear bars for both the rear and the front, they seem to be wearing quite evenly.

I've got plans for some Diablo Rosso II's by the end of the year. I really liked the S20's but am going to give Pirelli a shot.

October 12th, 2013, 09:40 AM	#4641
csmith12 The Corner Whisperer Name: Chris (aka Reactor) Location: Northern KY Join Date: May 2011 Motorcycle(s): 2010 250 (track), 1992 250, 2006 R6 (street/track), 2008 R6 (track) Posts: Too much. MOTY 2015, MOTM - Nov '12, Nov '13	Well, how bout this then. I plan to race the 250 class again next season, with the MotoSeries and MCRA, as many rounds as I can afford. I was kicking around racing the R6 but thought... there is still much to learn from the lil bike and I have learned so much thus far. I aint giving up until I get an elbow down. So I will keep the R6 in street clothes. Winter plans; Drum up some more sponsors (racin' aint cheap ) Proper paint job Proper dyno tune A set of rain shoes A spare set of wheels with tires (already have those ) Install all my suspension parts Clipons + spare bars Spare rearsets ect.. ect.. And the best part , I got an old enclosed trailer that I am rebuilding. Along with the new truck, she gets a new trailer to ride in covered style. I just need something cool to paint or vinyl on the side. "Smith Family Racing" is already taken by a friend of mine, so need something different. Accepting any and all ideas. She will come emerge of hibernation so fresh and so clean. __________________________________________________ Goal: Shake A Million Hands \| Look through the corners \| Track Day Prep \| Closest track? \| The Mid-Ohio School

October 12th, 2013, 12:17 PM	#4642
lgk ninjette.org certified postwhore Name: Jason Location: Norfolk, VA Join Date: Dec 2011 Motorcycle(s): 2012 EX250, 2014 EX300 Posts: A lot.	Werd racing taken already? __________________________________________________ Ethioknight Memorial Fund- Sticker sale http://www.ninjette.org/forums/showthread.php?t=111700
	1 out of 1 members found this post helpful.

October 12th, 2013, 12:24 PM	#4643
csmith12 The Corner Whisperer Name: Chris (aka Reactor) Location: Northern KY Join Date: May 2011 Motorcycle(s): 2010 250 (track), 1992 250, 2006 R6 (street/track), 2008 R6 (track) Posts: Too much. MOTY 2015, MOTM - Nov '12, Nov '13	DUH!!!!!!! lol, taken or not, that is what's going on the side of the trailer. __________________________________________________ Goal: Shake A Million Hands \| Look through the corners \| Track Day Prep \| Closest track? \| The Mid-Ohio School

October 13th, 2013, 04:43 PM	#4644
IF13 WOT WOT WOT Name: Ken Location: Suffolk Join Date: Jul 2013 Motorcycle(s): '12 Ninja 250R Posts: 421	Almost bought another mirror but realized I just needed the locking nuts. Also while dismantling the front, I realized I used the longer bolt that I needed for the bottom of the windshield for the gas tank bracket. So now I've got the windshield properly mounted and the mirror back in place.While doing this, I decided to finally clean off two months worth of NY grime and lube the chain. Then I discovered a dent on a pipe that comes directly from the radiator...Yep not in the best motorcycle mood. I mean....Its been running for the past month without any flaws but that dents pretty severe. It pretty much cut the volume of coolant that can pass by half. Whether or not the bike's cooling system is compensating for this, I wouldn't know. But I'm hoping replacing this pipe isn't going to be difficult. For anyone who cares, it's part number 39192 and it doesn't look like cake to replace it. Physically speaking. Logically, it just seems to get twisted on or something. __________________________________________________ May your roads stay clear....

October 13th, 2013, 05:38 PM	#4646
menikmati crash 250, get supersport Name: Richard Location: San Diego, CA Join Date: Apr 2010 Motorcycle(s): 2010 250R SE (Sold 6/9/14), 2009 ZX-6R (Sold 6/25/14), Subaru BRZ Posts: A lot.	I got lucky at the gas station and got the pump that had residual gas from the last fill-up, coating my gas tank with gas. Cleaned and lubed the chain. Cleaning in a chain is so much easier when it's done on a regular basis before it gets all loaded up with gunk. __________________________________________________

October 13th, 2013, 05:13 PM	#4645
TheTraveler ninjette.org member Name: Kevin Location: Diamond Bar, CA Join Date: Feb 2013 Motorcycle(s): 2010 Ninja 250 SE (Red/Black) Posts: 33	I didn't start today, but finished everything today as I prepare for a 4-5 day trip around California in 2 weeks. - take the wheels off - take it shop to mount the Pirelli Diablo Rosso II I bought online - reinstall wheels - align rear wheel - adjust chains - clean/lube chains - change filter and oil (Rotella T6) - wash bike I took the tires to Bert's Mega Mall in Covina, CA to mount them. $20 for both tires, really cheap. Much cheaper than everywhere else ($50+). They balanced it too. These tires already have 60 miles of break-in miles in them.

October 13th, 2013, 06:07 PM	#4647
mtbang ninjette.org newbie Name: Angie Location: St. Charles, MO Join Date: Sep 2013 Motorcycle(s): 2011 Ninja 250R SE, 2011 Triumph Street Triple R, 2013 BMW F800GT, 2005 Honda CRF230F Posts: 9	After doing a lot of reading about changing the front to a 15T sprocket, I bit the bullet and swapped mine out. I think that was the most practical mod I have done thus far. I also put the CRG clutch/brake levers on, makes the reach a little better for me. Plus they look so much better than the stock levers.

October 13th, 2013, 08:20 PM	#4648
JUSTiiE ninjette.org newbie Name: Justin Location: Arkansas Join Date: Oct 2013 Motorcycle(s): 2011 Ninja 250 Posts: 8	Don't Laugh. Serious question here... ...Okay. So I'm curious now as to how many speeds my 2011 Ninja has. Is it 5 speed or 6 speed. I've only gotten it up to 70 Mph, on 5th gear, and it sounds like and feels like there could be a 6th. But I'm scared to actually try and shift up and the clutch slip back in to 5th, and possibly screw something. Again I don't know crap about gears, clutches and what not. First motorcycle, first manual vehicle too. Help me out if you can?
	1 out of 1 members found this post helpful.

October 13th, 2013, 11:49 PM	#4656
NevadaWolf Certified looney toon Name: Teri Location: 39°52'40.7"N 118°23'53.8"W (Northern NV) Join Date: Jun 2012 Motorcycle(s): 2012 Ninja 250, 102k+ miles -- 2014 CB500X, 42k+ miles Posts: A lot. Blog Entries: 16 MOTM Jul '13, Jul '14	Added on a third of the miles I wanted in almost twice the time i needed. But did go off roading a bit and above all else, any ride on the bike is a good day! __________________________________________________ <-- Linky Hey Unregistered! The code [you] shows the username currently logged in. IBA # 56020 AMA # 521481 Fun Rides! ][ My Videos ][ My Gear Hold yourself to the same rules you expect others to follow.

October 15th, 2013, 07:53 AM	#4664
lgk ninjette.org certified postwhore Name: Jason Location: Norfolk, VA Join Date: Dec 2011 Motorcycle(s): 2012 EX250, 2014 EX300 Posts: A lot.	Hope it came with a box of ear plugs, lol __________________________________________________ Ethioknight Memorial Fund- Sticker sale http://www.ninjette.org/forums/showthread.php?t=111700

October 15th, 2013, 07:55 AM	#4666
cuong-nutz RIP Alex Name: Cuong Location: Houston, TX Join Date: Apr 2011 Motorcycle(s): '10 250r, '09 265r Posts: A lot. Blog Entries: 2	obnoxiously, and my hearing is shot too. Age may be a factor too lol. __________________________________________________ HalfFast Racing Team Serving Greater Houston Area Riders:WFO Riders MotoHouston HPC CMRA Ride Smart Fastline Lone Star Track Days

October 15th, 2013, 03:35 PM	#4671
tfkrocks ninjette.org certified postwhore Name: Rebecca Location: SF Bay Area Join Date: Sep 2009 Motorcycle(s): 2013 Ninja 300 w/ ABS, 2014 NC700X, 2008 Ninja 250 (sold), 2002 Ninja 250 (sold) Posts: A lot. MOTM - Jan '18, Sep '13	Rode though some smoke on the road. I think something was burning at the center divide. Oh yeah and this is the first thing I've posted with my GoPro Hero3 Link to original page on YouTube.

October 15th, 2013, 08:10 PM	#4673
allanoue ninjette.org certified postwhore Name: Al Location: York, Pa Join Date: Dec 2012 Motorcycle(s): 2013 Ninja 300..............2008 Ninja 500-sold...2009 Ninja 250-Crashed Posts: Too much. MOTM - Sep '14	Oil change w/t6 Tried to find the mythical 7th gear without success. I will be sure to look for it again soon
	1 out of 1 members found this post helpful.

October 15th, 2013, 08:33 PM	#4674
JohnnyBravo Certifiable nontundrum Name: Harper Location: NC Milkshake stand Join Date: Mar 2013 Motorcycle(s): 2013 SE NINJA 300 Posts: Too much. MOTM - Sep '13, Sep '16	Patted the tank, gave it a kiss on the ear, and said "soon my friend soon" __________________________________________________

October 15th, 2013, 08:53 PM	#4675
NevadaWolf Certified looney toon Name: Teri Location: 39°52'40.7"N 118°23'53.8"W (Northern NV) Join Date: Jun 2012 Motorcycle(s): 2012 Ninja 250, 102k+ miles -- 2014 CB500X, 42k+ miles Posts: A lot. Blog Entries: 16 MOTM Jul '13, Jul '14	Found a way to carry fuel!! __________________________________________________ <-- Linky Hey Unregistered! The code [you] shows the username currently logged in. IBA # 56020 AMA # 521481 Fun Rides! ][ My Videos ][ My Gear Hold yourself to the same rules you expect others to follow.

October 16th, 2013, 02:07 AM	#4677
Daks Jersey Devil Name: Daks Location: Austin, TX Join Date: Oct 2012 Motorcycle(s): '06 Ninja 250 Posts: 469	Planned a twisty ride on wildcat canyon rd and tested out my glove liners. Not exactly heated grips level of warmth but still a world of difference. __________________________________________________ ~Riding like a grandma because I wanna ride as a grandma~

October 16th, 2013, 08:12 AM	#4678
menikmati crash 250, get supersport Name: Richard Location: San Diego, CA Join Date: Apr 2010 Motorcycle(s): 2010 250R SE (Sold 6/9/14), 2009 ZX-6R (Sold 6/25/14), Subaru BRZ Posts: A lot.	Placed an order for a bicycle floor pump because I don't check my tire pressures enough out of laziness. Plan on getting 90 degree valve stems next tire change, have about 8.5k on my S20's and can still go about 1-1.5k more. __________________________________________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Discovered something scary about my Ninjette today...	kjohng	General Motorcycling Discussion	28	October 15th, 2021 01:40 PM
Sold the 2006 Ninjette today :(	Renner	General Motorcycling Discussion	31	October 16th, 2014 11:46 PM
Today I Gave My Ninjette Wings!	BlueHairSar	Pictures	5	June 20th, 2013 07:38 AM
my bro went down today on his ninjette	richierich781	!%@*#$%!)@#&!%@ I crashed!	46	January 18th, 2013 11:59 AM
Ninjette. org hacked today	CC Cowboy	Off-Topic	9	April 3rd, 2011 08:55 AM