February 10th, 2016, 08:00 PM | #1 |
ninjette.org member
Name: Jon
Location: Southern California
Join Date: Dec 2014 Motorcycle(s): 77' yamaha xs650 / 01' R6 / 08' ninja 250 Posts: 31
|
250 track bike project
I know theres a million of these on here but i wanted to share my project anyway.
I just got some new sharkskinz today and the fitment is near OEM. i give these a 9/10 only because there was a little crack in the upper but its easily repairable. |
|
February 10th, 2016, 08:04 PM | #2 |
ninjette.org member
Name: Jon
Location: Southern California
Join Date: Dec 2014 Motorcycle(s): 77' yamaha xs650 / 01' R6 / 08' ninja 250 Posts: 31
|
heres a picture of the crack. its about the size of a nickel but Its under the headlight of the upper so its not really noticeable. ill probably fix it anyway.
other than that, all the holes lined up perfectly and were pre drilled. Ive bought ebay fairings before where i had a terrible time getting everything to line up. Even the body parts that came in the kit didnt fit with each other. Even though i spent twice as much on sharkskinz, you really do get what you pay |
|
February 10th, 2016, 08:05 PM | #3 |
ninjette.org member
Name: Jon
Location: Southern California
Join Date: Dec 2014 Motorcycle(s): 77' yamaha xs650 / 01' R6 / 08' ninja 250 Posts: 31
|
ill probably be putting up the stock fairings up for sale in a future thread. i rate them 8.5/10. the bike only has 2k miles on it
|
|
February 27th, 2016, 08:06 PM | #4 |
ninjette.org member
Name: Jon
Location: Southern California
Join Date: Dec 2014 Motorcycle(s): 77' yamaha xs650 / 01' R6 / 08' ninja 250 Posts: 31
|
I just finished up some painting over the past week. i kind of rushed the job so it definitely isn't my best work but its good enough for a track bike
|
|
February 27th, 2016, 08:12 PM | #5 |
ninjette.org member
Name: Jon
Location: Southern California
Join Date: Dec 2014 Motorcycle(s): 77' yamaha xs650 / 01' R6 / 08' ninja 250 Posts: 31
|
a few more pictures
|
3 out of 3 members found this post helpful. |
March 5th, 2016, 10:00 AM | #6 |
Board Member
Name: ...
Location: WI
Join Date: Dec 2011 Motorcycle(s): 250R (street), 250R (dirt) Posts: A lot.
|
Nice looking bike!
|
|
March 5th, 2016, 10:30 AM | #7 |
The Corner Whisperer
Name: Chris (aka Reactor)
Location: Northern KY
Join Date: May 2011 Motorcycle(s): 2010 250 (track), 1992 250, 2006 R6 (street/track), 2008 R6 (track) Posts: Too much.
MOTY 2015, MOTM - Nov '12, Nov '13
|
Nice!
__________________________________________________
Goal: Shake A Million Hands | Look through the corners | Track Day Prep | Closest track? | The Mid-Ohio School |
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Another 250 track project | sparky80 | Ninjettes At Speed | 10 | February 10th, 2016 08:08 PM |
[roadracingworld.com] - Sportbike Track Gear announces 2015 Project Bike Giveaway | Ninjette Newsbot | Motorcycling News | 0 | April 8th, 2015 12:50 PM |
New member and new track bike project | GregS | Ninjettes At Speed | 28 | January 17th, 2015 04:34 PM |
[roadracingworld.com] - Sportbike Track Gear Gives Away Yamaha YZF-R1 Project Bike | Ninjette Newsbot | Motorcycling News | 0 | November 15th, 2013 06:50 PM |
WTB: 2008+ 250R salvage bike for track bike project | htdub | Items Wanted | 0 | April 25th, 2012 11:12 AM |
|
|