New indicators from China (with photos) for scrutineering.

[burnrich]

What do people think of the modern indicator replacement for the pre-gen? Love it or lose it?

[Kscreations08]

I imagine the wiring for the turn signals is the same for both pre and new gen. Got these for my new gen and they work great

http://www.amazon.com/gp/product/B00...?ie=UTF8&psc=1

[burnrich]

Originally Posted by Kscreations08

I imagine the wiring for the turn signals is the same for both pre and new gen. Got these for my new gen and they work great

http://www.amazon.com/gp/product/B00...?ie=UTF8&psc=1

Yep wiring is pretty much the same. I prefer the clear lens though. Wanted a change from the amber look.

[Singh2jz]

Not good enough for me lol. I'm making my own. We'll see how they turn out.

[kdogg2077]

Originally Posted by Kscreations08

I imagine the wiring for the turn signals is the same for both pre and new gen. Got these for my new gen and they work great

http://www.amazon.com/gp/product/B00...?ie=UTF8&psc=1

How do you get those to stick out far enough and fit in the old turn signal hole? I bought some similar ones but they didn't stick far enough out and the threads on them are too big to fit the screws on the new gen fairing.

[Kscreations08]

Originally Posted by kdogg2077

How do you get those to stick out far enough and fit in the old turn signal hole? I bought some similar ones but they didn't stick far enough out and the threads on them are too big to fit the screws on the new gen fairing.

The turn signals are definitely shorter than stock, but I found them to fit perfect. Definitely didn't have any issues with screws or anything. The set I bought was literally the "take out old, replace with new, have a beer" kind of plug and play. I already owe pictures in a few different areas of the forum but I'll add this to the list I'll get a side profile shot of the signal for you

[b.miller123]

Originally Posted by Kscreations08

I imagine the wiring for the turn signals is the same for both pre and new gen. Got these for my new gen and they work great

http://www.amazon.com/gp/product/B00...?ie=UTF8&psc=1

The older bikes may use the same wiring, but the signals mount to a large base that is then bolted to the outside of the fairing. Installing the ones you linked would require creating another base to mount them to, or just screwing them onto the fairings and having them pointing towards the center of the bike, and leaving a large hole where the original bases are.

I made some plates that cover up the holes and installed a set of proton turn signals that were made for another bike (ZX-6 I think).

[burnrich]

I'm now using an abs platic cement to patch over the hole where the rubbers mounted to the fairing. I'll then drill new holes in the original black plastic mount and then mount the new indicators. I love abs plastic cement. It creates new plastic right where you need it!I'll follow up with some photos of what I've done later on ...