March 28th, 2015, 06:43 PM | #1 |
ninjette.org member
Name: warwick
Location: vancouver
Join Date: Mar 2010 Motorcycle(s): 2009 kawasaki ninja 250r Posts: 35
|
Need asap!!!
I'm in need of a oil filter cap, or housing ... Just the round base that it sits on , mine has cracked , and Im going on a trip very soon and motorcycle shops can only get them in a few days after I'm supposed to leave , if anyone has one lemme know asap and price , thanks!
Not sure if my picture will post , but I took a half ass pic of it It's for an 09 ninja 250 |
|
March 28th, 2015, 08:09 PM | #2 |
ninjette.org certified postwhore
Name: Inderveer
Location: San Jose
Join Date: Nov 2012 Motorcycle(s): '07 ex250-F/J Posts: A lot.
|
I think I've got one..It's for a pregen but I think it should fit. lemme check
|
|
March 28th, 2015, 08:13 PM | #3 |
ninjette.org member
Name: warwick
Location: vancouver
Join Date: Mar 2010 Motorcycle(s): 2009 kawasaki ninja 250r Posts: 35
|
Awesome yea lemme know
|
|
March 28th, 2015, 08:41 PM | #4 |
ninjette.org certified postwhore
Name: Inderveer
Location: San Jose
Join Date: Nov 2012 Motorcycle(s): '07 ex250-F/J Posts: A lot.
|
Yo, it should fit, according to bike bandit part numbers. Check for sure yourself and let me know. Just pay shipping.
|
|
March 28th, 2015, 08:49 PM | #5 |
ninjette.org member
Name: warwick
Location: vancouver
Join Date: Mar 2010 Motorcycle(s): 2009 kawasaki ninja 250r Posts: 35
|
Alright , il check it out , think we can get it out to van by Wednesday ?
|
|
March 28th, 2015, 08:50 PM | #6 |
ninjette.org member
Name: warwick
Location: vancouver
Join Date: Mar 2010 Motorcycle(s): 2009 kawasaki ninja 250r Posts: 35
|
What year is the one u have for?
|
|
March 28th, 2015, 09:08 PM | #8 |
ninjette.org member
Name: warwick
Location: vancouver
Join Date: Mar 2010 Motorcycle(s): 2009 kawasaki ninja 250r Posts: 35
|
Yea it's a crack ,oil is coming from it , wish it was a casting defect lol
|
|
March 28th, 2015, 09:09 PM | #9 |
ninjette.org member
Name: warwick
Location: vancouver
Join Date: Mar 2010 Motorcycle(s): 2009 kawasaki ninja 250r Posts: 35
|
Kind of a bad picture , but it goes all the way under etc
|
|
March 28th, 2015, 09:19 PM | #10 |
ninjette.org certified postwhore
Name: Inderveer
Location: San Jose
Join Date: Nov 2012 Motorcycle(s): '07 ex250-F/J Posts: A lot.
|
The pregen ones..I think it's off of an 04. I'll take some pics
|
|
March 28th, 2015, 09:51 PM | #11 |
ninjette.org certified postwhore
Name: Inderveer
Location: San Jose
Join Date: Nov 2012 Motorcycle(s): '07 ex250-F/J Posts: A lot.
|
|
|
March 28th, 2015, 09:56 PM | #12 |
ninjette.org member
Name: warwick
Location: vancouver
Join Date: Mar 2010 Motorcycle(s): 2009 kawasaki ninja 250r Posts: 35
|
That looks like the right one , I couldn't find any part numbers like u did , but it looks spot on, just wondering bout shipping time , I'm leaving next Thursday morning , does anyone ship like super Rush so I could get it on Wednesday? Lol
|
|
March 28th, 2015, 10:03 PM | #13 |
wat
Name: wat
Location: tustin/long beach
Join Date: Sep 2009 Motorcycle(s): wat Posts: Too much.
Blog Entries: 5
MOTM - Oct '12, Feb '14
|
i've got a spare also... if inderveer doesn't want to ship it i guess i can... but you'll be paying for it when it comes to that shipping. we're both in california, usa... lmk if you need mine
__________________________________________________
|
|
March 28th, 2015, 10:08 PM | #14 |
ninjette.org member
Name: warwick
Location: vancouver
Join Date: Mar 2010 Motorcycle(s): 2009 kawasaki ninja 250r Posts: 35
|
I'm trying to search up what it will cost to ship it
|
|
March 28th, 2015, 10:11 PM | #15 |
ninjette.org certified postwhore
Name: Inderveer
Location: San Jose
Join Date: Nov 2012 Motorcycle(s): '07 ex250-F/J Posts: A lot.
|
Haha oh we gotta competition going on lol.
Usps is gonna charge like 60 bucks for 3-5 business days, but 20 for 6-10 days. I can ship from whoever you want, cuz you payin homiee. Lol |
|
March 28th, 2015, 10:15 PM | #16 |
ninjette.org member
Name: warwick
Location: vancouver
Join Date: Mar 2010 Motorcycle(s): 2009 kawasaki ninja 250r Posts: 35
|
Lol, the joys of somthing going wrong right before a long ride ....
Il let u know tomrrow what's going on, gotta see my time etc.. But if it doesnt work out , I really apreciate the effort budd! Hopefully il beable to do the same one day . I'm finally back on this site , been away for a bit , hadn't been riding from a back injury , Anyways , il let u know as soon as I can! Thanks again |
|
March 28th, 2015, 10:24 PM | #17 |
ninjette.org certified postwhore
Name: Inderveer
Location: San Jose
Join Date: Nov 2012 Motorcycle(s): '07 ex250-F/J Posts: A lot.
|
Hopefully you find someone in canada so it'll be cheaper, but we're down for whatever. Let us know.
Good luck! |
|
March 29th, 2015, 08:31 AM | #18 |
.
Name: .
Location: .
Join Date: Aug 2014 Motorcycle(s): . Posts: A lot.
MOTM - July '15
|
JB weld it and use some gorilla tape and call it good.
|
|
March 29th, 2015, 10:15 AM | #19 |
ninjette.org member
Name: warwick
Location: vancouver
Join Date: Mar 2010 Motorcycle(s): 2009 kawasaki ninja 250r Posts: 35
|
|
|
March 29th, 2015, 11:18 AM | #20 |
wat
Name: wat
Location: tustin/long beach
Join Date: Sep 2009 Motorcycle(s): wat Posts: Too much.
Blog Entries: 5
MOTM - Oct '12, Feb '14
|
i think a thinner epoxy might be a better choice, something that will seep into the crack better than jp weld
__________________________________________________
|
|
March 29th, 2015, 11:33 AM | #21 |
ninjette.org sage
Name: Aaron
Location: Winder, GA
Join Date: Jun 2012 Motorcycle(s): 2013 Ninja 300 Posts: 718
|
+1 for the JB Weld. It will hold forever on a piece like that.
__________________________________________________
DISCLAIMER: I generally have no idea what I'm talking about. |
|
March 29th, 2015, 12:09 PM | #22 |
ninjette.org guru
Name: Lee
Location: Monroe, LA
Join Date: Feb 2014 Motorcycle(s): Rebel 250s, Ninja 250s VN750s (currently nine total) Posts: 465
|
A lot of epoxy failures are caused by poor surface prep. Clean it well and it should hold. If you have a rotary tool, I'd recommend cutting/grinding a shallow V into the casing over the crack.
__________________________________________________
Profanity is the weapon of the witless. |
1 out of 1 members found this post helpful. |
March 29th, 2015, 12:10 PM | #23 |
.
Name: .
Location: .
Join Date: Aug 2014 Motorcycle(s): . Posts: A lot.
MOTM - July '15
|
I was joking tbh. But Alex makes a good good point. Try a thinner epoxy, and maybe jb weld over it. Even then, its iffy.
|
|
March 29th, 2015, 12:31 PM | #24 |
ninjette.org member
Name: warwick
Location: vancouver
Join Date: Mar 2010 Motorcycle(s): 2009 kawasaki ninja 250r Posts: 35
|
I got a few things to try , I'm gonna use the jb over it and use the jb putty for aluminum aswell once it's dry, it's such a minor crack but it's a bitch lol. Il let u guys know how it works , still hoping my part comes in on Wednesday tho
|
|
March 29th, 2015, 12:34 PM | #25 |
ninjette.org member
Name: warwick
Location: vancouver
Join Date: Mar 2010 Motorcycle(s): 2009 kawasaki ninja 250r Posts: 35
|
I'm just curious to see how it works
|
|
March 30th, 2015, 08:07 PM | #26 |
ninjette.org member
Name: warwick
Location: vancouver
Join Date: Mar 2010 Motorcycle(s): 2009 kawasaki ninja 250r Posts: 35
|
So, it worked , no leaks , nothing , rode for a few hours today to see if anything came loose etc .. It's all good , but I'm still hoping my part comes in by Wednesday lol, thanks again for the help guys
|
|
March 30th, 2015, 11:19 PM | #28 |
ninjette.org member
Name: warwick
Location: vancouver
Join Date: Mar 2010 Motorcycle(s): 2009 kawasaki ninja 250r Posts: 35
|
Ya I origionaly did, but they said its gonna be in friday, if I'm super lucky , then Wednesday ... However I leave Wednesday , so I couldn't risk it , that's why I was trying to get one
|
|
March 30th, 2015, 11:20 PM | #29 |
ninjette.org member
Name: warwick
Location: vancouver
Join Date: Mar 2010 Motorcycle(s): 2009 kawasaki ninja 250r Posts: 35
|
But it looks like my fix worked , so when I get back , I can put the new part on
|
|
March 30th, 2015, 11:22 PM | #30 |
ninjette.org member
Name: warwick
Location: vancouver
Join Date: Mar 2010 Motorcycle(s): 2009 kawasaki ninja 250r Posts: 35
|
Thus why I needed the part asap lol
|
|
March 31st, 2015, 07:10 AM | #32 |
ninjette.org sage
Name: Aaron
Location: Winder, GA
Join Date: Jun 2012 Motorcycle(s): 2013 Ninja 300 Posts: 718
|
So what did you end up using?
__________________________________________________
DISCLAIMER: I generally have no idea what I'm talking about. |
|
April 1st, 2015, 06:36 PM | #33 |
ninjette.org member
Name: warwick
Location: vancouver
Join Date: Mar 2010 Motorcycle(s): 2009 kawasaki ninja 250r Posts: 35
|
|
1 out of 1 members found this post helpful. |
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Odometer problem...needs to be fix asap | azian4lifz | 1986 - 2007 Ninja 250R Tech Talk | 9 | June 3rd, 2014 02:26 AM |
Please help need answser asap | skilletmo | 2008 - 2012 Ninja 250R Tech Talk | 12 | October 14th, 2012 12:45 PM |
Bad Steering, NEED HELP ASAP! | nycsteve | 2008 - 2012 Ninja 250R Tech Talk | 1 | September 8th, 2012 09:21 AM |
Removing Carb, Need Help ASAP! | EliteNinja | 2008 - 2012 Ninja 250R Tech Talk | 2 | March 31st, 2012 04:07 PM |
License tips asap please! | blink | General Motorcycling Discussion | 13 | May 27th, 2011 09:24 AM |
|
|