Titanium Area P Exhaust

CRXTrek · January 28th, 2009, 01:45 AM

Well i hate Carbon Fiber and i'm no fan of Stainless either so.......Kerry over at Area P hooked me up with a Titanium can. I asked him if he could do it because i saw the Concourse was available with it. He said it would be done in the R&D Dept. So the same day i ordered it he shipped it out.

They are some great people the deal with. I will recommend them to everyone!!!

Now i just need some warm weather so i can put it on

So here is my 15" Titanium Area P with quiet core internals

Viper-Byte · January 28th, 2009, 02:32 AM

Very nice looking, be sure to post pics of the bike once installed

I must agree that they are a great company to buy from, I have been emailing Kerry and have talked to Jenny on the phone, they are both great!

Tigerpaw · January 28th, 2009, 06:40 AM

Looks good!

Did they happen to say anything about weight savings?

CRXTrek · January 28th, 2009, 07:15 AM

Quote:

Originally Posted by Tigerpaw

Looks good!

Did they happen to say anything about weight savings?

AreaP website says a 7 lbs. savings. I believe this is with 12" carbon can.

kkim said in his DYI " 5 1/5 lbs." with his 18" stainless can.

Mine should be some where in between.

FedEx had my package at 10 1/2 lbs. shipping. Area P packs with ALOT of popcorn and foam wrap.

Tigerpaw · January 28th, 2009, 05:34 PM

Is that real carbon fiber?

kbryant · January 28th, 2009, 06:23 PM

Quote:

Originally Posted by Tigerpaw

Is that real carbon fiber?

100% pure carbon fiber, with the highest temp resin in the industry. No fiberglass fillers (like other manufactures).

stroked59 · January 28th, 2009, 07:48 PM

what is the i.d on the exhuast at the end of the can?

CRXTrek · January 28th, 2009, 09:08 PM

Quote:

Originally Posted by stroked59

what is the i.d on the exhuast at the end of the can?

1 3/4" Inlet End

Tigerpaw · January 29th, 2009, 10:07 AM

^^Thanks kbryant^^

I am extremely happy with your standard SS full system

noche_caliente · January 31st, 2009, 10:03 AM

Very nice! I can't wait until I can afford my Area-P exhaust!

CRXTrek · January 31st, 2009, 03:17 PM

Except for rotten wellnuts everything went smooth .
It sounds great . A little louder than my modded stock muffler and much quieter than that HR-1 i wasted $$$ on ! ! !

aloh · February 2nd, 2009, 04:08 PM

Looks nice!!!

What didnt you like about the HR-1?

Kurosaki · February 2nd, 2009, 08:34 PM

Quote:

Originally Posted by aloh

Looks nice!!!

What didnt you like about the HR-1?

It's stupidly loud and ugly?

January 28th, 2009, 01:45 AM	#1
CRXTrek FORMER MOTORCYCLE RIDER Name: Steve Location: On a Trek SU200 or in my CRX Join Date: Dec 2008 Motorcycle(s): Rode an 08 250r then rode an 08 ZX-6R until i totaled it on 7/10/10 Posts: 758	Titanium Area P Exhaust Well i hate Carbon Fiber and i'm no fan of Stainless either so.......Kerry over at Area P hooked me up with a Titanium can. I asked him if he could do it because i saw the Concourse was available with it. He said it would be done in the R&D Dept. So the same day i ordered it he shipped it out. They are some great people the deal with. I will recommend them to everyone!!! Now i just need some warm weather so i can put it on So here is my 15" Titanium Area P with quiet core internals

January 28th, 2009, 06:40 AM	#3
Tigerpaw ninjette.org guru Name: Tom Location: Dayton, OH Join Date: Jan 2009 Motorcycle(s): '13 Ninja 300 '09 Boulevard C50. '08 250r(TOTALED BY DEER) Posts: 467	Looks good! Did they happen to say anything about weight savings? __________________________________________________ CHEERS!!!

January 28th, 2009, 05:34 PM	#5
Tigerpaw ninjette.org guru Name: Tom Location: Dayton, OH Join Date: Jan 2009 Motorcycle(s): '13 Ninja 300 '09 Boulevard C50. '08 250r(TOTALED BY DEER) Posts: 467	Is that real carbon fiber? __________________________________________________ CHEERS!!!

January 29th, 2009, 10:07 AM	#9
Tigerpaw ninjette.org guru Name: Tom Location: Dayton, OH Join Date: Jan 2009 Motorcycle(s): '13 Ninja 300 '09 Boulevard C50. '08 250r(TOTALED BY DEER) Posts: 467	^^Thanks kbryant^^ I am extremely happy with your standard SS full system __________________________________________________ CHEERS!!!

January 31st, 2009, 03:17 PM	#11
CRXTrek FORMER MOTORCYCLE RIDER Name: Steve Location: On a Trek SU200 or in my CRX Join Date: Dec 2008 Motorcycle(s): Rode an 08 250r then rode an 08 ZX-6R until i totaled it on 7/10/10 Posts: 758	Titanium Area P installed Except for rotten wellnuts everything went smooth . It sounds great . A little louder than my modded stock muffler and much quieter than that HR-1 i wasted $$$ on ! ! ! Last futzed with by CRXTrek; January 31st, 2009 at 03:22 PM. Reason: fix HUGE pics

January 28th, 2009, 02:32 AM	#2
Viper-Byte ninjette.org sage Name: David Location: Wellington, New Zealand Join Date: Dec 2008 Motorcycle(s): 08 Ninja 250R in Green! (Sold) Now 2011 Triumph Daytona 675 SE Posts: 564	Very nice looking, be sure to post pics of the bike once installed I must agree that they are a great company to buy from, I have been emailing Kerry and have talked to Jenny on the phone, they are both great!

January 28th, 2009, 07:48 PM	#7
stroked59 ninjette.org member Name: Tim Location: O*C California Join Date: Dec 2008 Motorcycle(s): 08 Ninja 2505 Posts: 98	what is the i.d on the exhuast at the end of the can?

January 31st, 2009, 10:03 AM	#10
noche_caliente ninjette.org certified postwhore Name: Kim Location: mundo de ensueño Join Date: Nov 2008 Motorcycle(s): '08 250 Posts: A lot.	Very nice! I can't wait until I can afford my Area-P exhaust!

February 2nd, 2009, 04:08 PM	#12
aloh lolwut Name: Alex Location: socal Join Date: Dec 2008 Motorcycle(s): 2008 Kawasaki Ninja 250R Posts: 196	Looks nice!!! What didnt you like about the HR-1? __________________________________________________ 08 Blue Ninja 250R

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
FS: Area-P solo exhaust bracket for Ninja 300 w/stock exhaust	c-dog	Motorcycle-related	2	September 12th, 2014 10:48 AM
R-9 Titanium exhaust.	rersme	2008 - 2012 Ninja 250R Farkles	9	February 8th, 2013 01:49 PM
Two brothers Titanium exhaust	jack_bm	2008 - 2012 Ninja 250R Farkles	11	May 7th, 2012 12:39 PM
Akrapovic Exhaust: Titanium or Carbon	Den	2008 - 2012 Ninja 250R Farkles	40	September 23rd, 2010 04:13 PM
WTB: Area P full exhaust (or exchange 08+ stock exhaust)	mikecronis	Items Wanted	0	June 16th, 2010 05:54 AM