October 19th, 2014, 08:34 AM | #81 | |
Intrepid Adventurer
Name: Josh
Location: Rochester/Buffalo NY
Join Date: Jan 2012 Motorcycle(s): 2004 GSXR 750 , 71 cb350streettracker, 07 Polaris Predator 500 Posts: A lot.
|
Quote:
Yeah they are definitely off the back of a ninja 650, super easy to source for free because everyone wants and integrated tail light. Just make a friend of a 650 rider lol
__________________________________________________
LIFE IS NOT FOR REGRETS OR EXCUSES. Breath deep, seek peace. Embrace the Madness. Life is good, let it be |
|
|
October 20th, 2014, 05:57 AM | #82 |
ninjette.org sage
Name: -
Location: -
Join Date: May 2010 Motorcycle(s): - Posts: 591
|
Excellent! They would be a great mod for both sets of signals. I do like how they look, it's very cool when certain parts can work easily on other bikes. Good info.
|
|
October 20th, 2014, 08:13 AM | #83 |
ninjette.org certified postwhore
Name: Jason
Location: Monroe, MI
Join Date: May 2013 Motorcycle(s): '75 CB550:.'82 XV920:.'00 KLR650:.'00 EX250:.'08 Ninja 250 Posts: A lot.
MOTM - June '15
|
I don't see how they would work on the back, for the Front I had to reshape the opening in the fairing, and modify the hold down on the 650 signal a little bit.
__________________________________________________
'82 XV920: Soon to be tracker--'00 KLR685:adv --'04 DRZ400E--'12 Super Tenere --'13 Versys Ride more, worry less. |
|
October 20th, 2014, 10:47 AM | #84 | |
Intrepid Adventurer
Name: Josh
Location: Rochester/Buffalo NY
Join Date: Jan 2012 Motorcycle(s): 2004 GSXR 750 , 71 cb350streettracker, 07 Polaris Predator 500 Posts: A lot.
|
Quote:
They came off the back of a ninja 650- A kid with a fender eliminator gave them too me with the license plate holder so I could put it on a dirt bike. I couldn't get the dirt bike titled for the street so I used them on the ninjette with zip ties. They are not direct blot on but the break down easily for modification. Did you just need to reshape the back plate? Its been a long time since I have seen these parts.
__________________________________________________
LIFE IS NOT FOR REGRETS OR EXCUSES. Breath deep, seek peace. Embrace the Madness. Life is good, let it be |
|
|
January 12th, 2015, 07:42 PM | #85 |
ninjette.org certified postwhore
Name: Jason
Location: Monroe, MI
Join Date: May 2013 Motorcycle(s): '75 CB550:.'82 XV920:.'00 KLR650:.'00 EX250:.'08 Ninja 250 Posts: A lot.
MOTM - June '15
|
More parts for this thing!
Woodcraft clipons (mounted all kinds of the wrong way!) Finally get me where I need to be. Probably going to do the stainless lines and new (to me) Tokico 4 pot caliper and adapter soon. The powder coating (toaster) oven keeps the shed bearable.
__________________________________________________
'82 XV920: Soon to be tracker--'00 KLR685:adv --'04 DRZ400E--'12 Super Tenere --'13 Versys Ride more, worry less. Last futzed with by verboten1; January 13th, 2015 at 12:35 PM. |
|
January 16th, 2015, 12:05 PM | #86 |
ninjette.org certified postwhore
Name: Jason
Location: Monroe, MI
Join Date: May 2013 Motorcycle(s): '75 CB550:.'82 XV920:.'00 KLR650:.'00 EX250:.'08 Ninja 250 Posts: A lot.
MOTM - June '15
|
thanks @green_bread !!!
__________________________________________________
'82 XV920: Soon to be tracker--'00 KLR685:adv --'04 DRZ400E--'12 Super Tenere --'13 Versys Ride more, worry less. |
|
January 16th, 2015, 12:09 PM | #87 | |
ninjette.org member
Name: Adam
Location: Columbia, MO
Join Date: May 2014 Motorcycle(s): Ninja 250R & CBR250R Posts: 105
|
Quote:
|
|
|
January 16th, 2015, 12:12 PM | #88 |
ninjette.org certified postwhore
Name: Jason
Location: Monroe, MI
Join Date: May 2013 Motorcycle(s): '75 CB550:.'82 XV920:.'00 KLR650:.'00 EX250:.'08 Ninja 250 Posts: A lot.
MOTM - June '15
|
we'll see, I haven't ridden it yet, so this may not be the final position
__________________________________________________
'82 XV920: Soon to be tracker--'00 KLR685:adv --'04 DRZ400E--'12 Super Tenere --'13 Versys Ride more, worry less. |
|
January 29th, 2015, 08:29 PM | #89 |
ninjette.org certified postwhore
Name: Jason
Location: Monroe, MI
Join Date: May 2013 Motorcycle(s): '75 CB550:.'82 XV920:.'00 KLR650:.'00 EX250:.'08 Ninja 250 Posts: A lot.
MOTM - June '15
|
I ended up switching the bars around a bit more, and may still need to change them again!
I also picked up a nice leather Corbin seat, It's getting super close to being the bike I want!
__________________________________________________
'82 XV920: Soon to be tracker--'00 KLR685:adv --'04 DRZ400E--'12 Super Tenere --'13 Versys Ride more, worry less. |
|
February 26th, 2015, 08:15 AM | #90 |
ninjette.org certified postwhore
Name: Jason
Location: Monroe, MI
Join Date: May 2013 Motorcycle(s): '75 CB550:.'82 XV920:.'00 KLR650:.'00 EX250:.'08 Ninja 250 Posts: A lot.
MOTM - June '15
|
adding in some more stuff to do.
I knew I never should have even though about being done with this bike. Going to attempt mounting a Ninja 650 wheel. the wheel, some spacer material, bearings and whatnot are on their way! Thanks to @subxero this got stuck in my head!
__________________________________________________
'82 XV920: Soon to be tracker--'00 KLR685:adv --'04 DRZ400E--'12 Super Tenere --'13 Versys Ride more, worry less. |
|
February 26th, 2015, 08:44 AM | #91 |
dirty boy
Name: Joe
Location: Johnstown, PA
Join Date: Sep 2012 Motorcycle(s): I don't even know anymore?? Posts: A lot.
MOTM - Apr '14
|
Better you than me
but If it doesn't work out I may be interested in buying the 650 wheel off you
__________________________________________________
I love the smell of burning pre-mix in the morning I don't think I'm a lot dumber than you thought that I think that I thought I was once. |
|
February 26th, 2015, 01:56 PM | #93 | |
ninjette.org certified postwhore
Name: Jason
Location: Monroe, MI
Join Date: May 2013 Motorcycle(s): '75 CB550:.'82 XV920:.'00 KLR650:.'00 EX250:.'08 Ninja 250 Posts: A lot.
MOTM - June '15
|
Quote:
Thank you, the hope is for paint this year, Cadillac Pearl White, with maybe some orange flake in the pearl.
__________________________________________________
'82 XV920: Soon to be tracker--'00 KLR685:adv --'04 DRZ400E--'12 Super Tenere --'13 Versys Ride more, worry less. |
|
|
March 14th, 2015, 09:12 AM | #94 |
ninjette.org certified postwhore
Name: Jason
Location: Monroe, MI
Join Date: May 2013 Motorcycle(s): '75 CB550:.'82 XV920:.'00 KLR650:.'00 EX250:.'08 Ninja 250 Posts: A lot.
MOTM - June '15
|
Wheel attempt starting.
The wide wheel project will not necessarily be as easy as expected, but I still think I can do it. Chain lines up (based on slider) Barely any room for caliper stay Overall it's centered well enough. Maybe shim swing arm over if possible. Haven't messed with the bike at all yet.
__________________________________________________
'82 XV920: Soon to be tracker--'00 KLR685:adv --'04 DRZ400E--'12 Super Tenere --'13 Versys Ride more, worry less. |
|
March 14th, 2015, 10:31 AM | #95 |
ninjette.org certified postwhore
Name: Inderveer
Location: San Jose
Join Date: Nov 2012 Motorcycle(s): '07 ex250-F/J Posts: A lot.
|
But what about when you mount the tire? You think it'll rub from the front?
|
|
March 14th, 2015, 11:21 AM | #96 |
ninjette.org certified postwhore
Name: Jason
Location: Monroe, MI
Join Date: May 2013 Motorcycle(s): '75 CB550:.'82 XV920:.'00 KLR650:.'00 EX250:.'08 Ninja 250 Posts: A lot.
MOTM - June '15
|
Tons of room up there, it's the width of the wheel center that's the biggest issue. I'm measuring the swing arm though, it looks like my mock up part may be bent.
__________________________________________________
'82 XV920: Soon to be tracker--'00 KLR685:adv --'04 DRZ400E--'12 Super Tenere --'13 Versys Ride more, worry less. |
|
March 20th, 2015, 08:14 PM | #97 |
ninjette.org certified postwhore
Name: Jason
Location: Monroe, MI
Join Date: May 2013 Motorcycle(s): '75 CB550:.'82 XV920:.'00 KLR650:.'00 EX250:.'08 Ninja 250 Posts: A lot.
MOTM - June '15
|
Today the rear set adapters were installed.
Before: After: I wish I didn't have to move them up, just back would have been perfect, but now my legs fit under the tank better. I think that's the last ergo mod I planned.
__________________________________________________
'82 XV920: Soon to be tracker--'00 KLR685:adv --'04 DRZ400E--'12 Super Tenere --'13 Versys Ride more, worry less. |
|
March 24th, 2015, 05:01 PM | #98 |
ninjette.org certified postwhore
Name: Jason
Location: Monroe, MI
Join Date: May 2013 Motorcycle(s): '75 CB550:.'82 XV920:.'00 KLR650:.'00 EX250:.'08 Ninja 250 Posts: A lot.
MOTM - June '15
|
Another goodie.
Mount for my new S5
__________________________________________________
'82 XV920: Soon to be tracker--'00 KLR685:adv --'04 DRZ400E--'12 Super Tenere --'13 Versys Ride more, worry less. |
|
April 2nd, 2015, 01:18 PM | #99 |
ninjette.org certified postwhore
Name: Jason
Location: Monroe, MI
Join Date: May 2013 Motorcycle(s): '75 CB550:.'82 XV920:.'00 KLR650:.'00 EX250:.'08 Ninja 250 Posts: A lot.
MOTM - June '15
|
More treats for me!
__________________________________________________
'82 XV920: Soon to be tracker--'00 KLR685:adv --'04 DRZ400E--'12 Super Tenere --'13 Versys Ride more, worry less. |
|
April 2nd, 2015, 04:12 PM | #100 |
RIP Alex
Name: Cuong
Location: Houston, TX
Join Date: Apr 2011 Motorcycle(s): '10 250r, '09 265r Posts: A lot.
Blog Entries: 2
|
I have come to dislike the 250 seat after the years.
__________________________________________________
HalfFast Racing Team Serving Greater Houston Area Riders:WFO Riders MotoHouston HPC CMRA Ride Smart Fastline Lone Star Track Days |
|
April 3rd, 2015, 06:33 AM | #101 |
ninjette.org certified postwhore
Name: Jason
Location: Monroe, MI
Join Date: May 2013 Motorcycle(s): '75 CB550:.'82 XV920:.'00 KLR650:.'00 EX250:.'08 Ninja 250 Posts: A lot.
MOTM - June '15
|
It only took me a few rides lol
__________________________________________________
'82 XV920: Soon to be tracker--'00 KLR685:adv --'04 DRZ400E--'12 Super Tenere --'13 Versys Ride more, worry less. |
|
April 3rd, 2015, 06:35 AM | #102 |
Private Joker
Name: Ben
Location: Towson, MD
Join Date: Nov 2012 Motorcycle(s): '99/'01 Ninja 250 "sketchy", '13 Ninja 300 "yoshi", '03 GSXR 600 "merlin" Posts: A lot.
MOTM - Mar '14
|
spencers seat mods is a great alternative to a new seat if you want to save some $$$
http://greatdaytoride.com/Home_Page.php http://www.ridermagazine.com/gear/sp...ds-review.htm/
__________________________________________________
I see you over there seeing me, do you see the me I think you see? |
1 out of 1 members found this post helpful. |
April 13th, 2015, 07:20 PM | #103 |
ninjette.org certified postwhore
Name: Jason
Location: Monroe, MI
Join Date: May 2013 Motorcycle(s): '75 CB550:.'82 XV920:.'00 KLR650:.'00 EX250:.'08 Ninja 250 Posts: A lot.
MOTM - June '15
|
I'm getting ready for my 2000 mile trip first week of May. Oil change, new spark plugs, check valves, wire up lighter socket, dual usb ports, and my auxiliary lights.
Naked! Lights mounted Wired up Night time All lights Low beam only USB and lighter socket
__________________________________________________
'82 XV920: Soon to be tracker--'00 KLR685:adv --'04 DRZ400E--'12 Super Tenere --'13 Versys Ride more, worry less. |
|
April 15th, 2015, 03:21 AM | #105 |
ninjette.org certified postwhore
Name: Jason
Location: Monroe, MI
Join Date: May 2013 Motorcycle(s): '75 CB550:.'82 XV920:.'00 KLR650:.'00 EX250:.'08 Ninja 250 Posts: A lot.
MOTM - June '15
|
Thanks, I have yet to ride with them, but I like the extra light.
Got the stands, and changed out the cracked front wheel and the brakes.
__________________________________________________
'82 XV920: Soon to be tracker--'00 KLR685:adv --'04 DRZ400E--'12 Super Tenere --'13 Versys Ride more, worry less. |
|
April 24th, 2015, 03:19 PM | #106 |
ninjette.org certified postwhore
Name: Jason
Location: Monroe, MI
Join Date: May 2013 Motorcycle(s): '75 CB550:.'82 XV920:.'00 KLR650:.'00 EX250:.'08 Ninja 250 Posts: A lot.
MOTM - June '15
|
Yeah....I don't think this works. Back to black tomorrow I think.
__________________________________________________
'82 XV920: Soon to be tracker--'00 KLR685:adv --'04 DRZ400E--'12 Super Tenere --'13 Versys Ride more, worry less. |
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Ninja 250 trike project | 4950cycle | Pictures | 40 | November 18th, 2016 01:08 PM |
Wtb Ninja 250 project bike jn CA | chugs | Items Wanted | 0 | October 31st, 2013 08:29 PM |
Wtb: Project ninja 250 + parts | 5evenz | Items Wanted | 2 | April 19th, 2012 10:40 PM |
Newest Ninja in Philadelphia, PA | Shwig | New Members | 23 | December 15th, 2011 02:28 PM |
2000 ninja 250 project/parts 600obo | porschepatrick912 | Motorcycle-related | 5 | January 18th, 2010 04:08 PM |
|
|