March 24th, 2017, 06:16 PM | #1 |
ninjette.org member
Name: Adam
Location: logan
Join Date: Nov 2016 Motorcycle(s): 2005 ninja 250 Posts: 74
|
Oil Issues
Alright guys my bike rebuild is almost done but I have stumbled across an issue i just can't figure out. Changed the oil a few months ago and I have run the bike just to make sure it didn't sit all winter without running. When I run it for a few minutes it starts smoking from the bottom of the bike. I have checked all the bolts and they are tight. I have small drops of oil leaking but only when the engine is either running or just been shut off. Any ideas what it could be? Bike only has 6500 miles
|
|
March 26th, 2017, 06:09 AM | #2 |
ninjette.org guru
Name: Julius Michael
Location: Philippines
Join Date: May 2016 Motorcycle(s): GPX250-RII Posts: 296
|
happened to my 2 stroke when i have a broken sprocket collar and busted sprocket oil seal
|
|
March 26th, 2017, 07:30 PM | #3 |
ninjette.org guru
Name: Julius Michael
Location: Philippines
Join Date: May 2016 Motorcycle(s): GPX250-RII Posts: 296
|
1st thing to do is to confirm where the leak is coming from
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
[motorcycle.com] - 2015-2016 Yamaha YZF-R3 Recalled for Clutch and Oil Pump Issues. | Ninjette Newsbot | Motorcycling News | 0 | July 21st, 2016 09:30 AM |
In need of assistance - fuel / oil issues | ans008 | 2008 - 2012 Ninja 250R Tech Talk | 5 | October 26th, 2013 04:56 AM |
Oil drain issues/Cracks | rrennert93 | 1986 - 2007 Ninja 250R Tech Talk | 32 | April 4th, 2013 06:02 PM |
Oil change issues | 4950cycle | 1986 - 2007 Ninja 250R Tech Talk | 8 | March 15th, 2013 07:55 PM |
Too much oil? Bike issues galore | jc_ninja | 1986 - 2007 Ninja 250R Tech Talk | 9 | May 2nd, 2011 10:09 AM |
|
|