New Clip ons

ztrack157 · September 18th, 2009, 09:01 PM

I'm waiting on my set to come in for me to bang around on for a little bit.

I have to wait for a muslim holiday to end first. But these are a new two way adjustable clip on.

kkim · September 18th, 2009, 09:37 PM

looks good.

adjustable how?

ztrack157 · September 18th, 2009, 09:42 PM

In and out like vortex and wc. But with these you can rotate the bars up and down thus no pinching a more range to find the position that suits the indvidual rider best.

Ken · September 18th, 2009, 09:58 PM

Very smart design.

sugizo_esp · September 19th, 2009, 02:22 AM

But i believe these do not really pitch you more forward then the WC

Shift250R · September 19th, 2009, 08:04 AM

Quote:

Originally Posted by sugizo_esp

But i believe these do not really pitch you more forward then the WC

Ya thats true but i wish the WC's would have alittle more angle instead of a more straight feel.

rockNroll · September 19th, 2009, 09:11 AM

Do the triples have to be dropped to make room for attaching those to the fork above them?

kawigirl09 · September 19th, 2009, 09:34 AM

That's kinda cool!

ztrack157 · September 19th, 2009, 10:34 AM

Quote:

Originally Posted by rockNroll

Do the triples have to be dropped to make room for attaching those to the fork above them?

Yes. Its the same effect as putting them under the triple then.

drumr9 · September 19th, 2009, 10:34 PM

Who makes them?

drumr9 · September 19th, 2009, 10:36 PM

who makes them?

ztrack157 · September 19th, 2009, 10:48 PM

Me myself and I... I have a company make them for me. The same that makes the X race rear sets. High Quality Duralumin

virtual120 · September 20th, 2009, 12:39 AM

Can you make me some and send them to New Zealand ?

gamma500 · September 20th, 2009, 09:25 AM

Wonder how lowering the forks would affect handling and if, under hard braking, how close the fender would get to the lower triple ? For sure the clamp holding the brake line near the lower clamp would need moving. Looks like you need to drop them at least 25mm to get the clip-ons on. Sounds like a set of stiffer fork springs would be a good idea. I know dropping the forks 15mm on my GSXR's made for a quicker turn in but beyond that things got pretty twitchy and without upgraded cartridge parts starting touching under heavy braking at speed.

ztrack157 · September 20th, 2009, 11:55 AM

^ actually you would not need to drop them 25mm. The stock setting as about 15mm worth of fork comming out of the top clamp so your looking more along the lines of 10mm.

gamma500 · September 22nd, 2009, 05:19 PM

Quote:

Originally Posted by ztrack157

^ actually you would not need to drop them 25mm. The stock setting as about 15mm worth of fork comming out of the top clamp so your looking more along the lines of 10mm.

Do you have an estimated price and availability date round figure yet ?

ztrack157 · September 22nd, 2009, 05:22 PM

Availability is next month. Wood craftish price. This will be a tech thread so pm me or post in the sportisimoto-usa.com thread. Otherwise Alex will send this thread there

Alex · September 23rd, 2009, 05:31 PM

These look damn good!

ztrack157 · September 23rd, 2009, 05:42 PM

Lol.

ztrack157 · September 25th, 2009, 11:35 PM

For some reason in the last week I have managed to gain access to more clipons then the entire US market produces. Theres to many to choose. Never a bad thing but my head hurts.

I have access to Kitaco like sema has shown.
I will have the Xraceand now yet another. Personally I think to much is going on with this next set but it would be cheaper than WC. Honest opinions are always welcome.

drumr9 · September 25th, 2009, 11:59 PM

comes with the shock? lol

ztrack157 · September 26th, 2009, 12:04 AM

No that steering dampner alone is $400.

Ichiro · September 26th, 2009, 12:19 PM

Could you provide some details on those gold clipons?

randomwalk101 · September 26th, 2009, 12:53 PM

wow..these clipons look rediculously nice!!!

ztrack157 · September 26th, 2009, 01:02 PM

Ichiro I still need to do some talking with the maker. Much like the x race set up with the addition of a riser. Adjustable to what suits you best.

drumr9 · September 27th, 2009, 12:17 AM

Stop teasing me!!

randomwalk101 · January 2nd, 2010, 02:30 PM

ztrack, have you gotten these in yet?

ztrack157 · January 2nd, 2010, 03:42 PM

which ones?

I have a set of xrace clipons sitting in my room and a set of kitacos (which I plan on using since they have a rub spot on them). PM me Jean

randomwalk101 · January 2nd, 2010, 03:59 PM

just wondering on feedback of them. Not looking for clipon just yet. Stock is right for me (for now). Still waiting for that CF sa/hugger though

ztrack157 · January 2nd, 2010, 05:36 PM

I'll have an update on that tonight I hope.

September 18th, 2009, 09:42 PM	#3
ztrack157 The Sportisi Master Name: Matt Location: Chico Join Date: May 2009 Motorcycle(s): 2008 Ninja 250 Posts: A lot.	In and out like vortex and wc. But with these you can rotate the bars up and down thus no pinching a more range to find the position that suits the indvidual rider best. __________________________________________________ Sportisimoto USA is born.

September 18th, 2009, 09:58 PM	#4
Ken "Is that the Ninjer 1000? Name: Ken Location: SoCal SGV Join Date: Nov 2008 Motorcycle(s): 2008 Quarter Liter Kawi Posts: 275	Very smart design. __________________________________________________ My Mods

September 19th, 2009, 10:48 PM	#12
ztrack157 The Sportisi Master Name: Matt Location: Chico Join Date: May 2009 Motorcycle(s): 2008 Ninja 250 Posts: A lot.	Me myself and I... I have a company make them for me. The same that makes the X race rear sets. High Quality Duralumin __________________________________________________ Sportisimoto USA is born.

September 20th, 2009, 11:55 AM	#15
ztrack157 The Sportisi Master Name: Matt Location: Chico Join Date: May 2009 Motorcycle(s): 2008 Ninja 250 Posts: A lot.	^ actually you would not need to drop them 25mm. The stock setting as about 15mm worth of fork comming out of the top clamp so your looking more along the lines of 10mm. __________________________________________________ Sportisimoto USA is born.

September 22nd, 2009, 05:22 PM	#17
ztrack157 The Sportisi Master Name: Matt Location: Chico Join Date: May 2009 Motorcycle(s): 2008 Ninja 250 Posts: A lot.	Availability is next month. Wood craftish price. This will be a tech thread so pm me or post in the sportisimoto-usa.com thread. Otherwise Alex will send this thread there __________________________________________________ Sportisimoto USA is born.

September 18th, 2009, 09:37 PM	#2
kkim Join Date: Nov 2008 Posts: Too much.	looks good. adjustable how?

September 19th, 2009, 02:22 AM	#5
sugizo_esp ninjette.org newbie Name: John Location: Sydney Join Date: Apr 2009 Motorcycle(s): Ninja 250R Posts: 8	But i believe these do not really pitch you more forward then the WC

September 19th, 2009, 09:11 AM	#7
rockNroll . Name: rock Location: greenville, south carolina Join Date: Jun 2009 Motorcycle(s): black Posts: A lot.	Do the triples have to be dropped to make room for attaching those to the fork above them?

September 19th, 2009, 09:34 AM	#8
kawigirl09 ninjette.org member Name: Shana Location: San Jose, Cali Join Date: Sep 2009 Motorcycle(s): 09 Ninja 250R (red) Posts: 28	That's kinda cool!

September 19th, 2009, 10:34 PM	#10
drumr9 ninjette.org member Name: Eddie Location: Hollywood/Hacienda Heights, CA Join Date: Aug 2009 Motorcycle(s): 09 Ninja 250(Gone), 09 GTS IE Vespa, 09 Monster ZX-6R Posts: 24	Who makes them?

September 19th, 2009, 10:36 PM	#11
drumr9 ninjette.org member Name: Eddie Location: Hollywood/Hacienda Heights, CA Join Date: Aug 2009 Motorcycle(s): 09 Ninja 250(Gone), 09 GTS IE Vespa, 09 Monster ZX-6R Posts: 24	who makes them?

September 20th, 2009, 12:39 AM	#13
virtual120 ninjette.org newbie Name: Tim Location: New Zealand Join Date: Sep 2009 Motorcycle(s): ninja 250r 2008 Posts: 1	Can you make me some and send them to New Zealand ?

September 20th, 2009, 09:25 AM	#14
gamma500 ninjette.org member Name: Craig Location: Asheville, NC Join Date: Aug 2009 Motorcycle(s): 2008 Ninja 250R Posts: 98	Wonder how lowering the forks would affect handling and if, under hard braking, how close the fender would get to the lower triple ? For sure the clamp holding the brake line near the lower clamp would need moving. Looks like you need to drop them at least 25mm to get the clip-ons on. Sounds like a set of stiffer fork springs would be a good idea. I know dropping the forks 15mm on my GSXR's made for a quicker turn in but beyond that things got pretty twitchy and without upgraded cartridge parts starting touching under heavy braking at speed.

September 23rd, 2009, 05:31 PM	#18
Alex ninjette.org dude Name: 1 guess :-) Location: SF Bay Area Join Date: Jun 2008 Motorcycle(s): '13 Ninja 300 (white, the fastest color!), '13 R1200RT, '14 CRF250L, '12 TT-R125LE Posts: Too much. Blog Entries: 7	These look damn good! __________________________________________________ Montgomery Street Motorcycle Club / cal24.com / crf250l.org / ninjette.org ninjette.org Terms of Service Shopping for motorcycle parts or equipment? Come here first. The friendliest Ninja 250R/300/400 forum on the internet! (especially Unregistered)

September 23rd, 2009, 05:42 PM	#19
ztrack157 The Sportisi Master Name: Matt Location: Chico Join Date: May 2009 Motorcycle(s): 2008 Ninja 250 Posts: A lot.	Lol. __________________________________________________ Sportisimoto USA is born.

September 25th, 2009, 11:59 PM	#21
drumr9 ninjette.org member Name: Eddie Location: Hollywood/Hacienda Heights, CA Join Date: Aug 2009 Motorcycle(s): 09 Ninja 250(Gone), 09 GTS IE Vespa, 09 Monster ZX-6R Posts: 24	comes with the shock? lol

September 26th, 2009, 12:04 AM	#22
ztrack157 The Sportisi Master Name: Matt Location: Chico Join Date: May 2009 Motorcycle(s): 2008 Ninja 250 Posts: A lot.	No that steering dampner alone is $400. __________________________________________________ Sportisimoto USA is born.

September 26th, 2009, 12:19 PM	#23
Ichiro ninjette.org member Name: Ichiro Location: So.Cal. Long Beach. Join Date: Dec 2008 Motorcycle(s): 2008 250r(sold). 2013 Kymco Super8 150 Posts: 223	Could you provide some details on those gold clipons?

September 26th, 2009, 12:53 PM	#24
randomwalk101 self wrencher Name: john Location: houston Join Date: Dec 2008 Motorcycle(s): 08 250r and 07 600r Posts: A lot.	wow..these clipons look rediculously nice!!!

September 26th, 2009, 01:02 PM	#25
ztrack157 The Sportisi Master Name: Matt Location: Chico Join Date: May 2009 Motorcycle(s): 2008 Ninja 250 Posts: A lot.	Ichiro I still need to do some talking with the maker. Much like the x race set up with the addition of a riser. Adjustable to what suits you best. __________________________________________________ Sportisimoto USA is born.

September 27th, 2009, 12:17 AM	#26
drumr9 ninjette.org member Name: Eddie Location: Hollywood/Hacienda Heights, CA Join Date: Aug 2009 Motorcycle(s): 09 Ninja 250(Gone), 09 GTS IE Vespa, 09 Monster ZX-6R Posts: 24	Stop teasing me!!

January 2nd, 2010, 02:30 PM	#27
randomwalk101 self wrencher Name: john Location: houston Join Date: Dec 2008 Motorcycle(s): 08 250r and 07 600r Posts: A lot.	ztrack, have you gotten these in yet?

January 2nd, 2010, 03:42 PM	#28
ztrack157 The Sportisi Master Name: Matt Location: Chico Join Date: May 2009 Motorcycle(s): 2008 Ninja 250 Posts: A lot.	which ones? I have a set of xrace clipons sitting in my room and a set of kitacos (which I plan on using since they have a rub spot on them). PM me Jean __________________________________________________ Sportisimoto USA is born.

January 2nd, 2010, 03:59 PM	#29
randomwalk101 self wrencher Name: john Location: houston Join Date: Dec 2008 Motorcycle(s): 08 250r and 07 600r Posts: A lot.	just wondering on feedback of them. Not looking for clipon just yet. Stock is right for me (for now). Still waiting for that CF sa/hugger though

January 2nd, 2010, 05:36 PM	#30
ztrack157 The Sportisi Master Name: Matt Location: Chico Join Date: May 2009 Motorcycle(s): 2008 Ninja 250 Posts: A lot.	I'll have an update on that tonight I hope. __________________________________________________ Sportisimoto USA is born.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Woodcraft clip-ons V.S. Kitaco clip-ons	tjb0012	2008 - 2012 Ninja 250R Tech Talk	41	June 20th, 2011 05:35 PM