August 28th, 2010, 12:23 PM | #1 |
ninjette.org member
Name: rick
Location: cape girardeau
Join Date: Aug 2010 Motorcycle(s): 2010 kawasaki ninja 250R Posts: 19
|
does anybody know if i can switch handlebars to clip-ons?
help, i would like to lean forward lower so i would like to know if its possible to switch handle bars to clip-ons for a 2010 kawasaki 250?? let me know what u guys think.
|
|
August 28th, 2010, 12:27 PM | #2 |
super ninja
Name: TJ
Location: Sacramento
Join Date: Feb 2010 Motorcycle(s): 2009 kawasaki 250r Posts: 127
|
Yep Shinto has them for 125 shipped through vince on ninjette
Woodcraft has them for 179.99 sportisi usa has them not sure how much but they are kitaco and go above the triple tree not under like the woodcraft or the shinto ones. I ordered the shinto ones because they are just like the woodcraft but WAY cheaper and seem easier to adjust.
__________________________________________________
2009 Ninja 250r aftermarket parts *HotBodies double bubble* *Swing Arm Sliders* *Sylvania Sliverstar Ultra* *Akrapovic Slip-on* *Shinto Clip-Ons/Grips/Bar Ends* |
|
August 28th, 2010, 12:43 PM | #3 |
ninjette.org certified postwhore
Name: Cuong
Location: San Diego
Join Date: Jul 2010 Motorcycle(s): 2008 Ninja 250r, 2007 Daytona 675 Posts: A lot.
|
|
|
August 28th, 2010, 05:53 PM | #4 | |
Ninjette CPT
Name: Vince
Location: jacksonville, fl
Join Date: May 2009 Motorcycle(s): Black 08 250r Posts: A lot.
|
Quote:
|
|
|
August 29th, 2010, 05:34 PM | #5 | |
ninjette.org member
Name: rick
Location: cape girardeau
Join Date: Aug 2010 Motorcycle(s): 2010 kawasaki ninja 250R Posts: 19
|
Quote:
|
|
|
August 29th, 2010, 06:06 PM | #6 |
ninjette.org certified postwhore
Name: Cuong
Location: San Diego
Join Date: Jul 2010 Motorcycle(s): 2008 Ninja 250r, 2007 Daytona 675 Posts: A lot.
|
Look above at vince's signature.
|
|
August 29th, 2010, 07:40 PM | #7 |
Ninjette CPT
Name: Vince
Location: jacksonville, fl
Join Date: May 2009 Motorcycle(s): Black 08 250r Posts: A lot.
|
rick,
you have a pm |
|
August 29th, 2010, 11:07 PM | #8 |
super ninja
Name: TJ
Location: Sacramento
Join Date: Feb 2010 Motorcycle(s): 2009 kawasaki 250r Posts: 127
|
dang you guys are to fast lol i was gunna be the hero and give the info hahaha oh well next time lol
__________________________________________________
2009 Ninja 250r aftermarket parts *HotBodies double bubble* *Swing Arm Sliders* *Sylvania Sliverstar Ultra* *Akrapovic Slip-on* *Shinto Clip-Ons/Grips/Bar Ends* |
|
August 30th, 2010, 12:34 AM | #9 |
CPT Falcon
Name: J.Emmett Turner
Location: Newnan, GA
Join Date: Apr 2009 Motorcycle(s): '08 CP Blue EX250J, '97 unpainted EX250F, 2nd '97 unpainted EX250F (no engine), '07 black EX250F Posts: A lot.
|
My front suspension is bad enough for my weight as it is so I don't want to compress the suspension to add clip ons. Do either of the two types accomplish this without pre-compressing the suspension? IIRC, you have to compress it to get enough tube to "grab" above the triple tree, so it probably only applies to Kitaco. Obviously, leaning forward is going to add a bit of load either way, but that same weight would shift forward under heavy braking without clip-ons as well. *shrug*
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Wanted Handlebars or clip ons | jakek94 | Items Wanted | 2 | March 27th, 2013 08:45 PM |
|
|