Played with wires a bit. Should be pretty straightforward to hide all that crap under the seat. Also worked on the seat pan. Its made of 1 1/2x 1 1/2 aluminum angle from Lowes and a piece of old aluminum sign. This way did not need to mess with bending the sides, i will use screws to hold it together. The blue tape shows the end of the driver seat area and where the cushioned hump will be.
New tires getting installed and balanced this weekend. Not looking forward to that.
Last futzed with by crazymadbastard; May 4th, 2015 at 06:45 PM.
|