Plan to fit the swinger:
Use ninjette hardened 22mm bushing and stock bolt.
Ordered a bearing with built in seals HK2229UU Needle Bearing 22x28x29 TLA2229UU Needle Bearings from amazon
ordered a bushing from 28mmx33mmX45mm bushing from bronzebushings.com- will trim the length to fit within overall width.
Main issue I see is that the bronze bushing will be press fit- like the stock bearing is. BUT the new bearing is going freely slide into new bushing. My solution is to sort of mushroom the end inside so that the bearing will not slide towards inside of swinger. The frame will not allow the bearing to slide out. My guess is the shock and linkages will keep swinger centered from moving from side to side.
|