April 29th, 2015, 01:54 PM | #1 |
ninjette.org member
Name: Jean
Location: Toronto Ontario Eh!
Join Date: Jun 2013 Motorcycle(s): Red 2012 Ninja 250 Posts: 57
|
Baby and her toys
Took a couple of pics since it's finally nice out.
Yes those are googly eyes on the Neotec Helmet. Other thing of note is the front original Ninja Dildo™ turn signals were replaced by Proton Flush mounts and the rear Dildo™ turn signals were removed completely. This was done within a month of me getting the bike. The mechanic who did maintenance on her this year also added a quick release pin to the rear wheel for easier maintenance. Yes I am aware she needs a wash. HID Kit Inside and turned Off. (Added This year) HID kit Outside and turned On. Really need to take a pic of it at night for comparison. Koso RX2N Inside (Added this year) Koso RX2N Outside USB Port for charging stuff (Added within the first few months of getting the bike.) Rear of the bike, you can see the AluRack I added this year and also the Integrated Turn Signal Tail Light I added within the first month of getting the bike, for some reason the light was showing wonky on the camera but it's light red when you look at it normally. This year, this mess Was reduced and simplified to this instead Cheers! |
1 out of 1 members found this post helpful. |
April 29th, 2015, 02:05 PM | #2 |
sammich maker
Name: snot
Location: West Ohio - in the kitchen
Join Date: Feb 2012 Motorcycle(s): 2013 white 300, 09 KLX 250 SF, 09 thunder blue 250(traded) Posts: A lot.
MOTM - Apr '15
|
Nicely done!
__________________________________________________
https://www.brocksperformance.com/VZ...0035+C450.aspx |
|
April 29th, 2015, 02:16 PM | #3 |
I'm crazy,your excuse is?
Name: Winston
Location: Connecticut
Join Date: May 2013 Motorcycle(s): 250 2007 ninja Posts: A lot.
|
I like it !
|
|
April 29th, 2015, 03:57 PM | #4 | |
ninjette.org certified postwhore
Name: Al
Location: York, Pa
Join Date: Dec 2012 Motorcycle(s): 2013 Ninja 300..............2008 Ninja 500-sold...2009 Ninja 250-Crashed Posts: Too much.
MOTM - Sep '14
|
Quote:
__________________________________________________
Keep calm and ride on -Motofool Never quit on a rainy day -ally99 |
|
|
April 29th, 2015, 04:24 PM | #5 |
ninjette.org member
Name: Jean
Location: Toronto Ontario Eh!
Join Date: Jun 2013 Motorcycle(s): Red 2012 Ninja 250 Posts: 57
|
Forgot about this.
These are my headphones, the LG HSB-730 Bluetooth headphones. They serve as both earplugs and a source of tunes. There are 6 buttons on the front, Volume Up, Volume Down, Pickup Phone call on the Left (they are on the Right in the picture) I never use the pick up phone call button because the last thing I want when I'm on the bike is to talk to an asshat. On the Left are Previous song, Next song and Pause. On the other side I placed the soft sides of a Velcro strip Then I added the Spiney part of Velcro strips to my jacket Resulting in this That way the headset doesn't flop around at high speed and the buttons are always in the same place. I generally only change songs when stopped or at very very low speeds. I also keep the volume at its lowest settings so I can still hear everything around me. Only down side is I keep hitting the buttons with my helmet when I do a shoulder check which randomly changes my songs if I am moving to the right lane and increases/decreases my volume if I move to the left one |
|
April 30th, 2015, 08:12 AM | #6 |
Blind 250 Loving Whore
Name: Tom
Location: Chesapeake, VA
Join Date: May 2011 Motorcycle(s): 2008 250R, 02 FZ1, '20 Fat Bob 114 Posts: A lot.
|
Looking good, pull those orange reflectors off!
|
1 out of 1 members found this post helpful. |
April 30th, 2015, 08:22 AM | #7 |
ninjette.org member
Name: Jean
Location: Toronto Ontario Eh!
Join Date: Jun 2013 Motorcycle(s): Red 2012 Ninja 250 Posts: 57
|
|
|
April 30th, 2015, 10:05 AM | #8 |
Rev Limiter
Name: Jay
Location: WI
Join Date: Jul 2013 Motorcycle(s): '06 SV650n, '00 Derbi GPR, '64 CA77 Dream 305, '70 CL450 Scrambler, numerous dirt bikes Posts: A lot.
MOTM - Jun '18, Oct '16
|
|
|
April 30th, 2015, 10:06 AM | #9 |
ninjette.org member
Name: Jean
Location: Toronto Ontario Eh!
Join Date: Jun 2013 Motorcycle(s): Red 2012 Ninja 250 Posts: 57
|
|
|
April 30th, 2015, 10:17 AM | #10 |
Rev Limiter
Name: Jay
Location: WI
Join Date: Jul 2013 Motorcycle(s): '06 SV650n, '00 Derbi GPR, '64 CA77 Dream 305, '70 CL450 Scrambler, numerous dirt bikes Posts: A lot.
MOTM - Jun '18, Oct '16
|
|
|
April 30th, 2015, 10:18 AM | #11 |
ninjette.org member
Name: Jean
Location: Toronto Ontario Eh!
Join Date: Jun 2013 Motorcycle(s): Red 2012 Ninja 250 Posts: 57
|
|
|
April 30th, 2015, 01:13 PM | #12 |
Rev Limiter
Name: Jay
Location: WI
Join Date: Jul 2013 Motorcycle(s): '06 SV650n, '00 Derbi GPR, '64 CA77 Dream 305, '70 CL450 Scrambler, numerous dirt bikes Posts: A lot.
MOTM - Jun '18, Oct '16
|
|
|
May 1st, 2015, 05:52 AM | #13 |
ninjette.org guru
Name: Nick
Location: Ontario
Join Date: Feb 2012 Motorcycle(s): '09 Ninja 250r (SOLD) - Black. 2011 ZX-6R Green/Black - 2001 Garbage Bag Green KLR650 Posts: 275
|
Very nice bike!
Personally I wouldn't take the reflectors off. You'd be surprised how much visibility they add from the side if you ride at night. Especially since you could use all the help you can get with Toronto drivers! |
|
May 1st, 2015, 02:32 PM | #14 |
ninjette.org member
Name: Jean
Location: Toronto Ontario Eh!
Join Date: Jun 2013 Motorcycle(s): Red 2012 Ninja 250 Posts: 57
|
I think you mean Toronto Murderers :P
|
|
June 17th, 2015, 04:02 PM | #15 |
ninjette.org member
Name: Brandon
Location: Kansas
Join Date: Aug 2013 Motorcycle(s): 2009 250r. 1983 BMW r100rt Posts: 38
|
nice bike
I love the usb port addition. where did you get that one? |
|
June 22nd, 2015, 01:38 PM | #16 |
ninjette.org member
Name: Jean
Location: Toronto Ontario Eh!
Join Date: Jun 2013 Motorcycle(s): Red 2012 Ninja 250 Posts: 57
|
http://www.cruisercustomizing.com/du...art/BBP-52-820
It's this model but this one seems to have more than mine. When I got it it was just the plug with an un-stripped red and back wire, had to build the rest of the wiring myself. I have it hooked up to the fuzeblock and the fuzeblock is set so that the USB is only on when the bike is on. Drilled a hole into the plastic of the bike and then the plug has a part that you unscrew, push it into the hole you made and screw it back in then just run the cable |
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
my 2 red toys | contact148 | Pictures | 8 | April 23rd, 2013 05:53 PM |
childhood toys... | ninja_thresh_hold | Off-Topic | 8 | January 2nd, 2012 09:04 PM |
My Toys! | StreetAngel21 | Pictures | 5 | May 24th, 2010 08:08 PM |
[topix.net] - Harley Baby Clothing: Buying Harley Davidson Baby Clothes | Ninjette Newsbot | Motorcycling News | 0 | August 6th, 2009 10:50 PM |
Thread Tools | |
|
|