December 14th, 2017, 06:42 PM | #1 |
ninjette.org member
Name: Ethan
Location: Maine
Join Date: Dec 2017 Motorcycle(s): 2010 Ninja 250r SE Posts: 38
|
Looking for cheap farkle suggestions!
I would like some cheap ($50) “farkle” suggestions for my bike, thanks in advance!
|
|
December 14th, 2017, 07:16 PM | #2 |
"a legend in my own mind"
Name: maverick9611
Location: Augusta,Georgia
Join Date: May 2017 Motorcycle(s): 2015 moto guzzi norge(brownie),2020 aprilia dorsoduro, Posts: A lot.
MOTM - Feb '18
|
https://www.ninjette.org/forums/showthread.php?t=300352
https://www.ninjette.org/forums/showthread.php?t=301683 https://www.ninjette.org/forums/showthread.php?t=298242
__________________________________________________
"trying not to get old" |
|
December 14th, 2017, 07:30 PM | #3 | |
ninjette.org member
Name: Ethan
Location: Maine
Join Date: Dec 2017 Motorcycle(s): 2010 Ninja 250r SE Posts: 38
|
Quote:
|
|
|
December 14th, 2017, 08:35 PM | #4 | |
The Corner Whisperer
Name: Chris (aka Reactor)
Location: Northern KY
Join Date: May 2011 Motorcycle(s): 2010 250 (track), 1992 250, 2006 R6 (street/track), 2008 R6 (track) Posts: Too much.
MOTY 2015, MOTM - Nov '12, Nov '13
|
Quote:
Grand total for 4 shims (small washers)... $0.36
__________________________________________________
Goal: Shake A Million Hands | Look through the corners | Track Day Prep | Closest track? | The Mid-Ohio School |
|
1 out of 1 members found this post helpful. |
December 14th, 2017, 09:03 PM | #5 | |
ninjette.org certified postwhore
Name: AKA JacRyann
Location: Mesa, AZ
Join Date: Dec 2011 Motorcycle(s): CB125T CBR250R-MC19 CBR250RR-MC22 NSR350R-MC21 VF500F CBR600RR SFV650 VFR750F R1M ST1300PA Valkyrie-F6C Posts: A lot.
MOTY - 2018, MOTM - Nov '17
|
Quote:
1. idle & low-end - unscrew pilot-screws 1/4-1/2 turn more than factory setting 2. midrange - shim needles 1-4mm, 1mm at a time. This is the variable depending upon which slip-on you get. 3. high-end - get smaller main jet, two sizes down if you have factory exhaust. One size down with aftermarket exhaust I've got 20% more high-end power than stock on my 2008. AFR is spot-on at 13.5:1 for maximum power in high-end (compared to stock 11.5-12.0:1). To do that, I went down to slightly smaller main jet with Tyga full-exhaust. Or just leave factory main-jet alone for 13.0:1 AFR in high-end. This is real tried and true mods done by pretty much all racers on newgens. I can dig out dyno-charts and magazine-articles that showed this is path to enlightenment. EDIT - > REFERENCES Racing on the Cheap - scroll down to "The Nuts and Bolts" section, note: "close to perfect" is with full AreaP exhaust and factory jetting. Racing Order - Dyno testing Dyno testing - lean mid-range only - thinned needle to correct. Last futzed with by DannoXYZ; December 15th, 2017 at 03:56 PM. |
|
|
December 15th, 2017, 03:13 AM | #6 |
"a legend in my own mind"
Name: maverick9611
Location: Augusta,Georgia
Join Date: May 2017 Motorcycle(s): 2015 moto guzzi norge(brownie),2020 aprilia dorsoduro, Posts: A lot.
MOTM - Feb '18
|
i have free uni filter for airbox. you just pay shipping
__________________________________________________
"trying not to get old" |
|
December 15th, 2017, 03:18 AM | #7 |
"a legend in my own mind"
Name: maverick9611
Location: Augusta,Georgia
Join Date: May 2017 Motorcycle(s): 2015 moto guzzi norge(brownie),2020 aprilia dorsoduro, Posts: A lot.
MOTM - Feb '18
|
https://www.ninjette.org/forums/showthread.php?t=307345.
this over your $50 budget but you a northerner.
__________________________________________________
"trying not to get old" |
|
December 15th, 2017, 03:33 AM | #8 |
"a legend in my own mind"
Name: maverick9611
Location: Augusta,Georgia
Join Date: May 2017 Motorcycle(s): 2015 moto guzzi norge(brownie),2020 aprilia dorsoduro, Posts: A lot.
MOTM - Feb '18
|
__________________________________________________
"trying not to get old" |
|
December 15th, 2017, 03:53 AM | #9 |
"a legend in my own mind"
Name: maverick9611
Location: Augusta,Georgia
Join Date: May 2017 Motorcycle(s): 2015 moto guzzi norge(brownie),2020 aprilia dorsoduro, Posts: A lot.
MOTM - Feb '18
|
__________________________________________________
"trying not to get old" |
1 out of 1 members found this post helpful. |
December 15th, 2017, 06:05 AM | #10 | |
Track Clown
Name: Chris
Location: Kingman, AZ
Join Date: May 2012 Motorcycle(s): '08 250R, 21 MV F3 800, Kawasaki 400 build Posts: A lot.
MOTM - Sep '15
|
Quote:
|
|
|
December 15th, 2017, 07:17 AM | #11 |
ninjette.org certified postwhore
Name: AKA JacRyann
Location: Mesa, AZ
Join Date: Dec 2011 Motorcycle(s): CB125T CBR250R-MC19 CBR250RR-MC22 NSR350R-MC21 VF500F CBR600RR SFV650 VFR750F R1M ST1300PA Valkyrie-F6C Posts: A lot.
MOTY - 2018, MOTM - Nov '17
|
How about some rear spools? I have about 4 different sets in different colours. Kinda like earrings!
Last futzed with by DannoXYZ; December 15th, 2017 at 08:37 AM. |
|
December 15th, 2017, 09:33 AM | #12 |
ninjette.org member
Name: Randy
Location: Portland OR
Join Date: Jul 2016 Motorcycle(s): 2008 Ninja 250R, 2017 Triumph Thruxton 1200 Classic (not the 'R') Posts: 44
|
Rowan & Martin had a whole family of Farkles but they might take offense at being called cheap.
|
|
December 15th, 2017, 10:36 AM | #13 | |
ninjette.org member
Name: Ethan
Location: Maine
Join Date: Dec 2017 Motorcycle(s): 2010 Ninja 250r SE Posts: 38
|
Quote:
|
|
|
December 15th, 2017, 10:38 AM | #14 | |
ninjette.org member
Name: Ethan
Location: Maine
Join Date: Dec 2017 Motorcycle(s): 2010 Ninja 250r SE Posts: 38
|
Quote:
|
|
|
December 15th, 2017, 03:49 PM | #15 |
ninjette.org certified postwhore
Name: AKA JacRyann
Location: Mesa, AZ
Join Date: Dec 2011 Motorcycle(s): CB125T CBR250R-MC19 CBR250RR-MC22 NSR350R-MC21 VF500F CBR600RR SFV650 VFR750F R1M ST1300PA Valkyrie-F6C Posts: A lot.
MOTY - 2018, MOTM - Nov '17
|
|
|
December 15th, 2017, 04:42 PM | #16 | |
ninjette.org member
Name: Ethan
Location: Maine
Join Date: Dec 2017 Motorcycle(s): 2010 Ninja 250r SE Posts: 38
|
Quote:
|
|
|
December 15th, 2017, 05:30 PM | #17 |
ninjette.org certified postwhore
Name: AKA JacRyann
Location: Mesa, AZ
Join Date: Dec 2011 Motorcycle(s): CB125T CBR250R-MC19 CBR250RR-MC22 NSR350R-MC21 VF500F CBR600RR SFV650 VFR750F R1M ST1300PA Valkyrie-F6C Posts: A lot.
MOTY - 2018, MOTM - Nov '17
|
Yeah, I may be building some stands too.
|
|
December 15th, 2017, 11:49 PM | #18 |
ninjette.org guru
Name: Kevin
Location: Stockton California
Join Date: Feb 2012 Motorcycle(s): 2012 Ninja 250R Posts: 362
|
The best fifty buck farkle you can buy is a small tank bag such as one of the Joe Rocket Manta models.
|
|
December 16th, 2017, 02:58 AM | #19 | |
"a legend in my own mind"
Name: maverick9611
Location: Augusta,Georgia
Join Date: May 2017 Motorcycle(s): 2015 moto guzzi norge(brownie),2020 aprilia dorsoduro, Posts: A lot.
MOTM - Feb '18
|
Quote:
https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1
__________________________________________________
"trying not to get old" |
|
|
December 18th, 2017, 09:13 AM | #20 |
ninjette.org member
Name: Ethan
Location: Maine
Join Date: Dec 2017 Motorcycle(s): 2010 Ninja 250r SE Posts: 38
|
I think I’m going to buy some green metallic spray paint and paint my clutch and brake levers. Anything else a should paint, that wouldn’t look stupid?
|
|
December 18th, 2017, 05:44 PM | #21 |
ninjette.org certified postwhore
Name: AKA JacRyann
Location: Mesa, AZ
Join Date: Dec 2011 Motorcycle(s): CB125T CBR250R-MC19 CBR250RR-MC22 NSR350R-MC21 VF500F CBR600RR SFV650 VFR750F R1M ST1300PA Valkyrie-F6C Posts: A lot.
MOTY - 2018, MOTM - Nov '17
|
Wheels
Swingarm |
|
December 18th, 2017, 06:09 PM | #22 |
ninjette.org member
Name: Ethan
Location: Maine
Join Date: Dec 2017 Motorcycle(s): 2010 Ninja 250r SE Posts: 38
|
|
|
December 18th, 2017, 06:38 PM | #23 |
ninjette.org certified postwhore
Name: AKA JacRyann
Location: Mesa, AZ
Join Date: Dec 2011 Motorcycle(s): CB125T CBR250R-MC19 CBR250RR-MC22 NSR350R-MC21 VF500F CBR600RR SFV650 VFR750F R1M ST1300PA Valkyrie-F6C Posts: A lot.
MOTY - 2018, MOTM - Nov '17
|
Maybe green swingarm and white wheels?
|
|
December 18th, 2017, 07:00 PM | #24 |
ninjette.org member
Name: Ethan
Location: Maine
Join Date: Dec 2017 Motorcycle(s): 2010 Ninja 250r SE Posts: 38
|
|
|
April 16th, 2018, 09:42 AM | #25 |
Needs a riding buddy.
Name: Taylor
Location: Houston
Join Date: Nov 2010 Motorcycle(s): 2008 Ninja 250, 1986 Honda Elite 80 Posts: 29
|
any paint updates? pics of anything?
__________________________________________________
Don't hide 'em. Ride 'em. |
|
April 16th, 2018, 12:36 PM | #26 |
"a legend in my own mind"
Name: maverick9611
Location: Augusta,Georgia
Join Date: May 2017 Motorcycle(s): 2015 moto guzzi norge(brownie),2020 aprilia dorsoduro, Posts: A lot.
MOTM - Feb '18
|
look in new gen farks, i have tons of stuff. latest is rear hugger.
__________________________________________________
"trying not to get old" |
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
my farkle | mrbanksta23 | 1986 - 2007 Ninja 250R Farkles | 19 | February 24th, 2014 11:48 PM |
farkle? what is that | alex.s | 2008 - 2012 Ninja 250R Farkles | 6 | November 28th, 2012 02:02 PM |
Time for me to Farkle! What to do? | SSG54 | 2008 - 2012 Ninja 250R Farkles | 17 | October 24th, 2012 03:04 PM |
Farkle sites??? | ninjette250 | 2008 - 2012 Ninja 250R Farkles | 2 | May 5th, 2011 11:31 AM |
|
|