January 8th, 2018, 02:32 AM | #1 |
ninjette.org member
Name: David
Location: Mexico
Join Date: Sep 2017 Motorcycle(s): 2010 Kawasaki Ninja 250R, 99' Suzuki Katana 600 (RIP) Posts: 95
|
What clutch cable i should buy?
Hi guys i have a problem, i checked the manufacturer part number on the bikebandit webpage and there says that the number is this "54011-0565" i found some cables on ebay but on the description says another manufacturer part number, in all the sellers says this number "54011-0566" but almost all the sellers who sells that clutch cable are from china.
Also i found a guy who sells a "Motion Pro -03-0417-Black Vinyl Clutch Cable." he is from USA and im from mexico so i think the cable could move more faster than the chinese Somebody have bought a motion pro or i should buy with the chinese guys? I wait for your answers I put below the links of the motion pro and the chinese clutch cable Chinese Clutch Cable Motion Pro Clutch Cable |
|
January 8th, 2018, 05:29 AM | #2 |
ninjette.org member
Name: Sean
Location: Southern IL
Join Date: Feb 2009 Motorcycle(s): 2009 250r SE, 2015 FJ-09 Posts: 171
|
I would buy the motion pro. Don't want to risk it on a chinesesium cable
|
|
January 8th, 2018, 06:55 AM | #3 |
????????????????
Name: T
Location: no where
Join Date: Feb 2016 Motorcycle(s): 2007 ninja 250, 14 ninja 300, 09 1125CR Posts: A lot.
MOTM - May '17
|
for the $2.50 more I would go with the motion pro
|
|
January 8th, 2018, 09:45 AM | #4 |
ninjette.org certified postwhore
Name: AKA JacRyann
Location: Mesa, AZ
Join Date: Dec 2011 Motorcycle(s): CB125T CBR250R-MC19 CBR250RR-MC22 NSR350R-MC21 VF500F CBR600RR SFV650 VFR750F R1M ST1300PA Valkyrie-F6C Posts: A lot.
MOTY - 2018, MOTM - Nov '17
|
I was researching this months ago when I found frayed clutch cable. No one made quality cable with teflon-lined housing. I ordered one MotionPro and one cable through Ali. Both exactly the same. I suspect that’s where MotionPro sources their cables.
In the end, I went with used OEM cable from breakers and have both MotionPro and Chinese cable as spares in my toolbox. Be careful when installing, set adjuster rotation so that its slot is aimed up or down so the cable doesn't rub on sharp edges of teeth. On back-burner, but I'm still looking for good cable with teflon-lined housing. May adapt one from different bike that's close enough. There are also DIY kits with unattached end. Trim to length and crimp & solder barrel-end on. Last futzed with by DannoXYZ; January 8th, 2018 at 11:40 AM. |
|
January 9th, 2018, 08:13 AM | #5 |
ninjette.org certified postwhore
Name: Gordon
Location: new york
Join Date: Sep 2009 Motorcycle(s): '95 DUCATI 900SS/SP '07 DUCATI SS800 '19 HONDA CBR650R Posts: A lot.
MOTM - Nov '18, Mar '17
|
565 seems to be the current, active part #. Note its common to the 300 as well.
566 is NOT a good part # at all
__________________________________________________
Custom Carb Service |
|
January 15th, 2018, 04:10 AM | #6 |
ninjette.org member
Name: vibhor
Location: india
Join Date: Mar 2011 Motorcycle(s): ninja 250r -2010 Posts: 60
|
i got cable for my ninja 250 2010 model from aliexpress, seems to working fine and fitment was good.
https://www.aliexpress.com/item/Moto...311.0.0.HhfpZE |
|
January 15th, 2018, 05:38 AM | #7 | |
ninjette.org certified postwhore
Name: Bill
Location: Port Huron, Michigan
Join Date: Mar 2017 Motorcycle(s): 2007 Kawasaki 250 Ninja, 1982 Honda Ascot FT500 Posts: A lot.
|
Quote:
Bill
__________________________________________________
Insanity: doing the same thing over and over again expecting different results each time. |
|
|
January 15th, 2018, 08:59 AM | #8 | |
ninjette.org certified postwhore
Name: AKA JacRyann
Location: Mesa, AZ
Join Date: Dec 2011 Motorcycle(s): CB125T CBR250R-MC19 CBR250RR-MC22 NSR350R-MC21 VF500F CBR600RR SFV650 VFR750F R1M ST1300PA Valkyrie-F6C Posts: A lot.
MOTY - 2018, MOTM - Nov '17
|
Quote:
|
|
|
January 16th, 2018, 12:21 AM | #9 |
ninjette.org member
Name: David
Location: Mexico
Join Date: Sep 2017 Motorcycle(s): 2010 Kawasaki Ninja 250R, 99' Suzuki Katana 600 (RIP) Posts: 95
|
Thanks for your answers guys, i bought the motion pro, only took 1 week from USA to my house, this friday i try to change the cable.
|
|
January 16th, 2018, 01:02 AM | #10 | |
ninjette.org certified postwhore
Name: Bill
Location: Port Huron, Michigan
Join Date: Mar 2017 Motorcycle(s): 2007 Kawasaki 250 Ninja, 1982 Honda Ascot FT500 Posts: A lot.
|
Quote:
Bill
__________________________________________________
Insanity: doing the same thing over and over again expecting different results each time. |
|
|
January 16th, 2018, 04:07 PM | #11 |
.
Name: .
Location: .
Join Date: Aug 2014 Motorcycle(s): . Posts: A lot.
MOTM - July '15
|
|
|
January 16th, 2018, 04:13 PM | #12 | |
ninjette.org certified postwhore
Name: Bill
Location: Port Huron, Michigan
Join Date: Mar 2017 Motorcycle(s): 2007 Kawasaki 250 Ninja, 1982 Honda Ascot FT500 Posts: A lot.
|
Quote:
I haven't checked recently but about three years ago they had an advisory on their website that advised lubing their cables because they didn't. Maybe things have changed. Bill
__________________________________________________
Insanity: doing the same thing over and over again expecting different results each time. |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Help please!!! Clutch cable | JayJay | 2008 - 2012 Ninja 250R Tech Talk | 5 | August 6th, 2015 07:54 AM |
Clutch cable | Linkin | 2008 - 2012 Ninja 250R Tech Talk | 5 | January 28th, 2015 03:29 AM |
clutch cable | james250ninja | 1986 - 2007 Ninja 250R Tech Talk | 2 | July 27th, 2013 10:20 AM |
Clutch Cable- Where to Buy? | Jim Moore | General Motorcycling Discussion | 3 | May 29th, 2012 05:49 AM |
Clutch Cable | atomicrm | 2008 - 2012 Ninja 250R Tech Talk | 2 | December 17th, 2011 12:22 PM |
|
|