July 3rd, 2019, 03:04 PM | #1 |
ninjette.org newbie
Name: Scott
Location: Cincinnati, OH
Join Date: Jul 2019 Motorcycle(s): None yet Posts: 7
|
'04 Idle Air Mixture Screw O-Rings
Hello! I am working on a friend's '04 250R to help him get it running. The carbs were pretty much gunked up so I've done a through cleaning and rebuild but it's still not dropping down to idle when letting off the throttle. I think I've narrowed it down to the o-rings in the idle air mixture screws being old and deformed so I'd like to replace them. However the only thing I can find is a compete Idle Air Mixture Screw assembly for $15-20 each side. The screws, spring and washer are fine, I'd just like to replace the o-rings if possible.
Does anyone know what the part number is for just the o-rings? The carbs were cleaned in an ultrasonic machine, all the passages were blown out with shop compressed air, passages confirmed clear with carb cleaner blown through them, boots on both air-box side and head side properly seated with no known vacuum leaks. Valve adjustment is in progress but I'm pretty sure it's an idle air mixture issue - though any additional thoughts would be appreciated! Thanks! |
|
July 3rd, 2019, 03:10 PM | #2 |
ninjette.org certified postwhore
Name: Gordon
Location: new york
Join Date: Sep 2009 Motorcycle(s): '95 DUCATI 900SS/SP '07 DUCATI SS800 '19 HONDA CBR650R Posts: A lot.
MOTM - Nov '18, Mar '17
|
contact me via PM re orings
__________________________________________________
gordon@customcarbservices.com Custom Carb Service www.customcarbservices.com |
|
July 3rd, 2019, 04:06 PM | #3 |
ninjette.org newbie
Name: Scott
Location: Cincinnati, OH
Join Date: Jul 2019 Motorcycle(s): None yet Posts: 7
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Air/fuel mixture screw o rings. How big of a deal are they? | squirrel | 1986 - 2007 Ninja 250R Tech Talk | 17 | February 20th, 2018 12:46 PM |
what is the best idle screw mixture | vmax | 2008 - 2012 Ninja 250R Tech Talk | 9 | July 1st, 2017 10:45 AM |
Question about idle mixture screw and low idle flux | daverdfw | 2008 - 2012 Ninja 250R Tech Talk | 3 | June 2nd, 2016 10:36 PM |
Idle Mixture Screw Problem | gogoKawi | 2008 - 2012 Ninja 250R Tech Talk | 6 | April 23rd, 2013 07:07 PM |
Wanted: Air mixture screw washers and O-rings | dtmbcorp | Items Wanted | 2 | August 4th, 2010 10:51 AM |
|
|