April 13th, 2012, 08:06 PM | #1 |
ninjette.org member
Name: Chadi
Location: Ottawa
Join Date: Jan 2012 Motorcycle(s): 2011 Ninja 250R Posts: 67
|
Oil change during break in
I currently have 300 km on the bike (200 mi) and I'm doing the motoman break in with varying high RPMs and a lot of engine breaking. A lot of people recommended changing the oil often when breaking in this way. I'm planning on changing the oil tomorrow and just wanted to know if I should change the oil filter as well?
|
|
April 13th, 2012, 08:07 PM | #2 |
The Corner Whisperer
Name: Chris (aka Reactor)
Location: Northern KY
Join Date: May 2011 Motorcycle(s): 2010 250 (track), 1992 250, 2006 R6 (street/track), 2008 R6 (track) Posts: Too much.
MOTY 2015, MOTM - Nov '12, Nov '13
|
yes
__________________________________________________
Goal: Shake A Million Hands | Look through the corners | Track Day Prep | Closest track? | The Mid-Ohio School |
|
April 13th, 2012, 08:26 PM | #3 |
Jigglin' your Jiglets
Name: Sean
Location: San Jose, Ca
Join Date: Jun 2011 Motorcycle(s): 2009 K1300S, 2013 Ninja 300, 2011 Ninja 250R, Faster than Unregistered's ninjette Posts: Too much.
Blog Entries: 1
MOTM - Apr '13
|
Make it a habit to always change them together, filters don't cost that much anyway
__________________________________________________
If the Ninja 250 doesn't have enough power for you, then you don't know how to ride it. AFM #676 Supersports are for n00bs |
|
April 13th, 2012, 08:30 PM | #4 |
cuz
Name: Israel
Location: Houston (me) Galveston
Join Date: Jul 2011 Motorcycle(s): 09 ninja 250r Posts: A lot.
|
i all ways do
__________________________________________________
THE GOOD LIFE |
|
April 13th, 2012, 09:08 PM | #5 |
ninjette.org sage
Name: Josh
Location: Richmond VA
Join Date: Oct 2009 Motorcycle(s): 2008 Triumph Bonneville Black Posts: 627
|
You should always change the filter when changing the oil on anything. However, Kawi does not suggest changing the oil frequently during break in. You'll be changing it again at 600 mi, kind of silly to do it now...
__________________________________________________
'08 Bonneville Black sold->'08 Ninja 250R | OES Swingarm Spools | EBC HH brake pads | reflector delete | no-cut brake light modulator | DIY fender eliminator |
|
April 14th, 2012, 06:43 AM | #6 |
ninjette.org member
Name: Chadi
Location: Ottawa
Join Date: Jan 2012 Motorcycle(s): 2011 Ninja 250R Posts: 67
|
Thank guys, I'll change the filter as well
Resoweb, I'm not following the Kawasaki guideline for break-in and apparently when you push the RPMs during break-in there's more metal shavings that fall through early on. That's what I'm reading anyway, will find out later if that's the case. Hopefully it won't look anything like this |
|
April 14th, 2012, 03:49 PM | #7 |
ninjette.org member
Name: Chadi
Location: Ottawa
Join Date: Jan 2012 Motorcycle(s): 2011 Ninja 250R Posts: 67
|
So I went to Canadian Tire and picked up some Gastrol oil (not many choices for 10W40).
Went to the Kawi dealer to get the drain plug washer and ended up buying 2 quarts of the Kawasaki oil and used that instead. So it went very smoothly but when I checked the oil there was definitely some shavings at the bottom of the pan. Not sure if it's too much or what. I even tore the oil filter but did not see much shavings there. In any case I will do another oil change in 300 kms and see if there's a difference. |
|
April 14th, 2012, 03:56 PM | #8 |
ninjette.org member
Name: Akshay
Location: Lakeville,MN
Join Date: Feb 2012 Motorcycle(s): 2012 Ninja 650 Posts: 146
|
Did my oil change at 50 miles and the pan looked the same way. Had a mechanic friend do it cuz I just wanted to see how it was done the first time... turns out since the redesigned this bike you have to take off the side fairings.. which was like 9 of those press in bolt things.. but anyways went back the next day and he showed me the filter that he cut out and let dry.. could see quite a bit of metal there also.
|
|
April 14th, 2012, 04:24 PM | #9 | |
ninjette.org guru
Name: scott
Location: australia
Join Date: Jan 2012 Motorcycle(s): 2012 ninja 250r se Posts: 435
|
Quote:
looks like you are paning for gold i did mine at 100kms, 500kms, will be at 3000kms i will be letting the dealer do the scheduled first 1000kms service and the second service at 6000kms. then ill be changing the oil at every 5000kms with 10-40 semi syn with ester |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Is it normal for oil to increase a bit in the crankcase after an oil change? | cadd | 2008 - 2012 Ninja 250R Tech Talk | 10 | May 15th, 2014 08:38 PM |
Synthetic oil at 300 mile oil change? | anacron | 2013 - 2017 Ninja 300 Tech Talk | 14 | July 29th, 2013 04:58 PM |
Oil drain plug gasket for oil change. | tsdexter | 2008 - 2012 Ninja 250R Tech Talk | 8 | July 10th, 2012 01:00 PM |
Should we change oil early during break-in? The answer is YES!!! | dubojr1 | 2008 - 2012 Ninja 250R Tech Talk | 54 | June 13th, 2012 12:46 PM |
change oil filter, without draining oil? | peter330 | 2008 - 2012 Ninja 250R Tech Talk | 5 | May 30th, 2010 01:08 PM |
|
|