January 27th, 2014, 07:05 AM | #4921 |
Track Clown
Name: Chris
Location: Kingman, AZ
Join Date: May 2012 Motorcycle(s): '08 250R, 21 MV F3 800, Kawasaki 400 build Posts: A lot.
MOTM - Sep '15
|
you may need to hang a flag on the bike when riding.
Damn IT. Stripped a seat bolt!! ugh. |
|
January 27th, 2014, 07:43 AM | #4922 |
ninjette.org sage
Name: darius
Location: GA
Join Date: Apr 2009 Motorcycle(s): 2000 250 sold; 2005 636 sold. BIKELESS IN ATLANTA Posts: 753
|
Installed a new battery, and took it for a 30 mile test ride.
|
|
January 27th, 2014, 03:56 PM | #4923 |
ninjette.org member
Name: Aaron
Location: Pflugerville, TX
Join Date: May 2013 Motorcycle(s): 2003 Kawasaki Ninja 250 Posts: 154
|
|
|
January 27th, 2014, 04:05 PM | #4924 |
Board Member
Name: ...
Location: WI
Join Date: Dec 2011 Motorcycle(s): 250R (street), 250R (dirt) Posts: A lot.
|
Driver seat
|
|
January 27th, 2014, 04:11 PM | #4925 |
Certifiable nontundrum
Name: Harper
Location: NC Milkshake stand
Join Date: Mar 2013 Motorcycle(s): 2013 SE NINJA 300 Posts: Too much.
MOTM - Sep '13, Sep '16
|
Put a nice little bit of miles on... Pretty clean ride
__________________________________________________
|
|
January 27th, 2014, 04:48 PM | #4926 |
RIP Alex
Name: Cuong
Location: Houston, TX
Join Date: Apr 2011 Motorcycle(s): '10 250r, '09 265r Posts: A lot.
Blog Entries: 2
|
Will be needing to replace the stem bearings soon. I'll probably tackle the job when I get around to ordering my new springs.
__________________________________________________
HalfFast Racing Team Serving Greater Houston Area Riders:WFO Riders MotoHouston HPC CMRA Ride Smart Fastline Lone Star Track Days |
|
January 27th, 2014, 04:54 PM | #4927 |
ninjette.org guru
Name: Christina
Location: Toronto
Join Date: Jul 2012 Motorcycle(s): 2013 Ninja 300, 2007 Gsxr 600, R6-sold :( Posts: 270
|
bought red ssr stem bolt.
|
|
January 27th, 2014, 04:54 PM | #4928 |
Track Clown
Name: Chris
Location: Kingman, AZ
Join Date: May 2012 Motorcycle(s): '08 250R, 21 MV F3 800, Kawasaki 400 build Posts: A lot.
MOTM - Sep '15
|
one bolt on each side holding the seat down.
|
|
January 28th, 2014, 11:50 AM | #4929 |
crash 250, get supersport
Name: Richard
Location: San Diego, CA
Join Date: Apr 2010 Motorcycle(s): 2010 250R SE (Sold 6/9/14), 2009 ZX-6R (Sold 6/25/14), Subaru BRZ Posts: A lot.
|
First ride since the valve adjustment and APE CCT, not sure if it's just in my head but the bike runs a lot smoother and the idle is rock solid as it used to fluctuate a tiny bit.
|
|
January 29th, 2014, 05:53 PM | #4930 |
Private Joker
Name: Ben
Location: Towson, MD
Join Date: Nov 2012 Motorcycle(s): '99/'01 Ninja 250 "sketchy", '13 Ninja 300 "yoshi", '03 GSXR 600 "merlin" Posts: A lot.
MOTM - Mar '14
|
Changed the oil, I swear to god that the pod was put on by king kong himself (I had the first oil change done by the dealership for warranty purposes.
|
|
January 31st, 2014, 12:40 PM | #4931 |
ninjette.org newbie
Name: wayne
Location: bangkok
Join Date: Jan 2014 Motorcycle(s): 2009 ninja 250r Posts: 9
|
Went for my first ride on my new ninja today.
I haven't rode a real bike for over 20 year and was a bit worried I needn't have been the little ninja is so easy to ride even when I made the usual noobish mistakes it was very forgiving. Damn fun I couldn't get the smile off my face Cant wait till tomorrow hehe |
|
January 31st, 2014, 12:44 PM | #4932 |
Track Clown
Name: Chris
Location: Kingman, AZ
Join Date: May 2012 Motorcycle(s): '08 250R, 21 MV F3 800, Kawasaki 400 build Posts: A lot.
MOTM - Sep '15
|
Looked at her and told her "it will get warm eventually".
|
|
January 31st, 2014, 12:45 PM | #4933 |
Certified looney toon
Name: Teri
Location: 39°52'40.7"N 118°23'53.8"W (Northern NV)
Join Date: Jun 2012 Motorcycle(s): 2012 Ninja 250, 102k+ miles -- 2014 CB500X, 42k+ miles Posts: A lot.
Blog Entries: 16
MOTM Jul '13, Jul '14
|
Whoo hoo, way to go Wayne!
That smile never leaves your face on this little bike. Its a very fun machine!
__________________________________________________
<-- Linky Hey Unregistered! The code [you] shows the username currently logged in. IBA # 56020 AMA # 521481 Fun Rides! ][ My Videos ][ My Gear Hold yourself to the same rules you expect others to follow. |
|
January 31st, 2014, 12:45 PM | #4934 |
The Corner Whisperer
Name: Chris (aka Reactor)
Location: Northern KY
Join Date: May 2011 Motorcycle(s): 2010 250 (track), 1992 250, 2006 R6 (street/track), 2008 R6 (track) Posts: Too much.
MOTY 2015, MOTM - Nov '12, Nov '13
|
wait... what are you talking about? bwahahhahahahaha
__________________________________________________
Goal: Shake A Million Hands | Look through the corners | Track Day Prep | Closest track? | The Mid-Ohio School |
|
January 31st, 2014, 08:23 PM | #4935 |
Certified looney toon
Name: Teri
Location: 39°52'40.7"N 118°23'53.8"W (Northern NV)
Join Date: Jun 2012 Motorcycle(s): 2012 Ninja 250, 102k+ miles -- 2014 CB500X, 42k+ miles Posts: A lot.
Blog Entries: 16
MOTM Jul '13, Jul '14
|
Got the supposedly OEM connectors in and so set up to install the new LED properly.
Connectors too big and has reversed wiring, broke innards trying to switch wires, jammed them back together and plugged it in, yay works! Wires fell out, release tab broke, threw busted pieces across garage into garbage, cut the OEM female connector off, crimped some blade connectors on, plugged everything back in, still works, wires fell out again... Walked away Returned much later, taped the **** out of both wires and connectors, correctly wired up the second connector (they installed it backwards, I plug it in backwards so my black is really red and red is really black), yay that's working. Unplug both to run wires through frame cleanly, broke tab off female side, decided I hate the OEM connectors on the bike and will just go through and install connections that can actually come apart without using a pry bar. But hey, i have a working LED tail light and two LED rear turn signals.
__________________________________________________
<-- Linky Hey Unregistered! The code [you] shows the username currently logged in. IBA # 56020 AMA # 521481 Fun Rides! ][ My Videos ][ My Gear Hold yourself to the same rules you expect others to follow. |
|
January 31st, 2014, 08:29 PM | #4936 |
Board Member
Name: ...
Location: WI
Join Date: Dec 2011 Motorcycle(s): 250R (street), 250R (dirt) Posts: A lot.
|
Wow some story
|
|
January 31st, 2014, 08:43 PM | #4937 | |
Certifiable nontundrum
Name: Harper
Location: NC Milkshake stand
Join Date: Mar 2013 Motorcycle(s): 2013 SE NINJA 300 Posts: Too much.
MOTM - Sep '13, Sep '16
|
Rode it!!!
Quote:
__________________________________________________
|
|
|
February 1st, 2014, 01:30 PM | #4938 |
crash 250, get supersport
Name: Richard
Location: San Diego, CA
Join Date: Apr 2010 Motorcycle(s): 2010 250R SE (Sold 6/9/14), 2009 ZX-6R (Sold 6/25/14), Subaru BRZ Posts: A lot.
|
Oil change, oil sample for Blackstone, lubed chain and clutch cable.
Ran 5k miles on Motul 300V, sending in a sample to Blackstone to see if it's holding up fine. |
|
February 1st, 2014, 03:03 PM | #4939 |
Board Member
Name: ...
Location: WI
Join Date: Dec 2011 Motorcycle(s): 250R (street), 250R (dirt) Posts: A lot.
|
Packaged up transmission.
|
|
February 1st, 2014, 07:07 PM | #4940 |
ninjette.org certified postwhore
Name: Al
Location: York, Pa
Join Date: Dec 2012 Motorcycle(s): 2013 Ninja 300..............2008 Ninja 500-sold...2009 Ninja 250-Crashed Posts: Too much.
MOTM - Sep '14
|
slow 1 hour ride over all the salt and cinders
|
|
February 1st, 2014, 07:17 PM | #4941 |
Private Joker
Name: Ben
Location: Towson, MD
Join Date: Nov 2012 Motorcycle(s): '99/'01 Ninja 250 "sketchy", '13 Ninja 300 "yoshi", '03 GSXR 600 "merlin" Posts: A lot.
MOTM - Mar '14
|
|
|
February 1st, 2014, 07:21 PM | #4942 |
ninjette.org certified postwhore
Name: Al
Location: York, Pa
Join Date: Dec 2012 Motorcycle(s): 2013 Ninja 300..............2008 Ninja 500-sold...2009 Ninja 250-Crashed Posts: Too much.
MOTM - Sep '14
|
|
|
February 1st, 2014, 07:43 PM | #4943 |
Private Joker
Name: Ben
Location: Towson, MD
Join Date: Nov 2012 Motorcycle(s): '99/'01 Ninja 250 "sketchy", '13 Ninja 300 "yoshi", '03 GSXR 600 "merlin" Posts: A lot.
MOTM - Mar '14
|
|
|
February 1st, 2014, 10:15 PM | #4944 |
ninjette.org member
Name: Red Snapper XXX
Location: Red Snapper City
Join Date: Nov 2013 Motorcycle(s): Ninja 250R 2009 Posts: 39
|
Givi Rack for Ninja 2009
Today,
I spend hours trying to install the Givi rack on my Ninja 250R 2009 "Blanket Stealer". It was a pain in the ass and I'm 90% done. Why do I have 10% left? 2 of the screws are too short and I manage to strip them Later this week, I'm going to go to home depot to grab longer scews. This is the 2nd time I have ever bought a Givi rack. The First one was my CBR125r, and it had fitment issues. One of the arms was bend slightly wrong, so after using a blow touch, I was able to bend it a little. Here's a picture of the place where the screws are too short. Once I have it all set up, I'll post pictures. Take care Everybody!! |
|
February 2nd, 2014, 01:36 AM | #4945 |
Certified Troublemaker
Name: Teri
Location: Hamilton, NJ
Join Date: Oct 2012 Motorcycle(s): 2006 Ninja 250r "Pikachu", 2017 Ninja 650 "Epona" Posts: A lot.
MOTM - Aug '13, Aug '14, Feb '17
|
There's probably enough salt on my car and the mans truck to handle the next blizzard. My black car is now white...
__________________________________________________
Raven's Rejuvenation A bruise is a lesson... and each lesson makes us better... |
|
February 2nd, 2014, 01:39 AM | #4946 |
ninjette.org certified postwhore
Name: Rick
Location: Alexandria, Louisiana
Join Date: Jan 2009 Motorcycle(s): 05 Blue Ninja 250 Posts: Too much.
MOTY - 2017, MOTM - Jan '19, Oct '16, May '14
|
|
|
February 2nd, 2014, 01:44 AM | #4947 |
Certified Troublemaker
Name: Teri
Location: Hamilton, NJ
Join Date: Oct 2012 Motorcycle(s): 2006 Ninja 250r "Pikachu", 2017 Ninja 650 "Epona" Posts: A lot.
MOTM - Aug '13, Aug '14, Feb '17
|
Car wash was in the agenda today. But I think it was on everyone else's too. The line at the car wash was out to the road. Took one look and said aw hell no!
I'll hit it up this week. Sounds like snow again this week anyway.
__________________________________________________
Raven's Rejuvenation A bruise is a lesson... and each lesson makes us better... |
|
February 2nd, 2014, 08:47 AM | #4948 |
Certifiable nontundrum
Name: Harper
Location: NC Milkshake stand
Join Date: Mar 2013 Motorcycle(s): 2013 SE NINJA 300 Posts: Too much.
MOTM - Sep '13, Sep '16
|
It's over 50 degrees now, getting into the 60's... You know what I'm gonna do braaaaaaaaap an wash
__________________________________________________
|
|
February 2nd, 2014, 08:55 AM | #4949 |
ninjette.org certified postwhore
Name: Al
Location: York, Pa
Join Date: Dec 2012 Motorcycle(s): 2013 Ninja 300..............2008 Ninja 500-sold...2009 Ninja 250-Crashed Posts: Too much.
MOTM - Sep '14
|
"They" are calling for 6" of snow tomorrow. I will be going for a ride today.
|
1 out of 1 members found this post helpful. |
February 2nd, 2014, 09:01 AM | #4950 |
Certifiable nontundrum
Name: Harper
Location: NC Milkshake stand
Join Date: Mar 2013 Motorcycle(s): 2013 SE NINJA 300 Posts: Too much.
MOTM - Sep '13, Sep '16
|
brrrrrr
__________________________________________________
|
|
February 2nd, 2014, 09:31 AM | #4951 |
ninjette.org sage
Name: Bob
Location: NY
Join Date: Jul 2012 Motorcycle(s): 2010 Ninja 250 2009 Ninja 250 Posts: 730
|
New k&n air filters and k&n oil filters for both bikes
Tires are here Now we sit and wait....
__________________________________________________
2010 Red Ninja 250 2009 Black Ninja 250 -If you ride like lightning,you're gonna crash like thunder- |
|
February 2nd, 2014, 09:34 AM | #4952 |
Board Member
Name: ...
Location: WI
Join Date: Dec 2011 Motorcycle(s): 250R (street), 250R (dirt) Posts: A lot.
|
Ordered captive spacers
|
|
February 3rd, 2014, 05:46 PM | #4953 |
Fast-Guy wannabe
Name: Jason
Location: Brentwood, Ca
Join Date: Oct 2011 Motorcycle(s): 2009 Ninja250, 2011 RM-Z250, 2004 NSR50, Posts: A lot.
MOTM - Jan '13
|
Went full sport touring, Mtb carrying, circus status after adding Saddle bags to my setup in preparation for a three day trip to SoCal for a mtb race this Sunday.
|
|
February 3rd, 2014, 06:29 PM | #4954 |
Board Member
Name: ...
Location: WI
Join Date: Dec 2011 Motorcycle(s): 250R (street), 250R (dirt) Posts: A lot.
|
Pics?
|
|
February 3rd, 2014, 10:01 PM | #4955 |
Certified looney toon
Name: Teri
Location: 39°52'40.7"N 118°23'53.8"W (Northern NV)
Join Date: Jun 2012 Motorcycle(s): 2012 Ninja 250, 102k+ miles -- 2014 CB500X, 42k+ miles Posts: A lot.
Blog Entries: 16
MOTM Jul '13, Jul '14
|
Made fireworks.
Pro tip, short circuits are bad. Pretty, but bad. Smell bad too. Fuses are god
__________________________________________________
<-- Linky Hey Unregistered! The code [you] shows the username currently logged in. IBA # 56020 AMA # 521481 Fun Rides! ][ My Videos ][ My Gear Hold yourself to the same rules you expect others to follow. |
|
February 3rd, 2014, 10:37 PM | #4956 |
ninjette.org member
Name: Ryan
Location: OC, CA
Join Date: Jan 2014 Motorcycle(s): 2009 Ninja 250R (Sold), 2007 SV650S Posts: 161
|
got a new front tire installed.
|
|
February 3rd, 2014, 11:30 PM | #4957 |
Certifiable nontundrum
Name: Harper
Location: NC Milkshake stand
Join Date: Mar 2013 Motorcycle(s): 2013 SE NINJA 300 Posts: Too much.
MOTM - Sep '13, Sep '16
|
__________________________________________________
|
|
February 4th, 2014, 04:30 AM | #4958 |
Certified Troublemaker
Name: Teri
Location: Hamilton, NJ
Join Date: Oct 2012 Motorcycle(s): 2006 Ninja 250r "Pikachu", 2017 Ninja 650 "Epona" Posts: A lot.
MOTM - Aug '13, Aug '14, Feb '17
|
Yikes!!!
__________________________________________________
Raven's Rejuvenation A bruise is a lesson... and each lesson makes us better... |
|
February 4th, 2014, 06:32 AM | #4959 |
Intrepid Adventurer
Name: Josh
Location: Rochester/Buffalo NY
Join Date: Jan 2012 Motorcycle(s): 2004 GSXR 750 , 71 cb350streettracker, 07 Polaris Predator 500 Posts: A lot.
|
Walked out into the 14deg icy cold hell that is NY right now.
Stepped into the garage. Started a fire in the wood stove Then stared longingly at both bikes for some time imagining what spring will bring lol. Un bolted the kick stand and located the oil change stuff I bought for the ninja. Haha get ready for spring maintenance |
|
February 4th, 2014, 06:33 AM | #4960 |
Hooligan
Name: Robin
Location: Central Iowa
Join Date: Jun 2013 Motorcycle(s): 2013 Ninja EX300 Posts: 250
|
I ran mine through the car wash yesterday and afterwards all I could think was "Damn, so that's what my car is supposed to look like." I should have ordered the WeatherTech mats for my Scion when I got them for the husband's BMW, because my carpet mats are definitely going to need a thorough shampoo come spring.
__________________________________________________
Qui patiens est, teres. Teres est, ieiunare. | Twitter: @Rogue_300 |
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Discovered something scary about my Ninjette today... | kjohng | General Motorcycling Discussion | 28 | October 15th, 2021 01:40 PM |
Sold the 2006 Ninjette today :( | Renner | General Motorcycling Discussion | 31 | October 16th, 2014 11:46 PM |
Today I Gave My Ninjette Wings! | BlueHairSar | Pictures | 5 | June 20th, 2013 07:38 AM |
my bro went down today on his ninjette | richierich781 | !%@*#$%!)@#&!%@ I crashed! | 46 | January 18th, 2013 11:59 AM |
Ninjette. org hacked today | CC Cowboy | Off-Topic | 9 | April 3rd, 2011 08:55 AM |
|
|