September 5th, 2012, 10:21 PM | #2161 |
I told you bro
Name: Noor
Location: Austin, Texas
Join Date: Jun 2012 Motorcycle(s): 1996 Ninja 250r Posts: 680
|
New grips. Somewhat underwhelming result because they were a bit short and I had to cut off some rubber. They look relatively nice though.
|
|
September 6th, 2012, 05:17 PM | #2162 |
ninjette.org guru
Name: Malinda
Location: Jonesboro, LA
Join Date: Jul 2012 Motorcycle(s): Ninja 250R Posts: 484
|
Just got back from getting my way overdue 600 maint. I was without my bike for a day and it seemed like a week, it sure was nice riding home
|
|
September 6th, 2012, 05:33 PM | #2163 |
ninjette.org member
Name: Matthew
Location: Kansas city
Join Date: Jul 2012 Motorcycle(s): Ex-250r Posts: 21
|
changed the oil
|
|
September 7th, 2012, 06:49 AM | #2164 |
time is running out....
Name: jesse
Location: the land of corn
Join Date: Sep 2012 Motorcycle(s): pregen ninjari Posts: 412
Blog Entries: 3
|
i put a water bottle holder on the rear right where teh fairing was
__________________________________________________
The King |
|
September 7th, 2012, 07:04 AM | #2165 |
MSF Coach!
Name: Lupe
Location: Antioch, Tennessee
Join Date: Jun 2012 Motorcycle(s): 2003 ninja 250 Posts: 886
|
|
|
September 7th, 2012, 07:05 AM | #2166 |
ninjette.org certified postwhore
Name: Hansveer
Location: Bombay, India
Join Date: Jan 2012 Motorcycle(s): Ninja 250r - Track whore, Ninja 300 - SOLD, KTM RC390 - Orange Hulk, Ducati 899 Panigale - Red Devil. Posts: A lot.
|
Transported my bike from Bombay to my current location in Rudrapur. Tons of twisties near by and several hill stations to visit... Unfortunately the bike arrIved with a bent kick stand and broken indicators... Nothing a flame torch and hammer couldn't fix, but still very annoying. Indicators have been repeatedly fixed with super glue, this time will be no different...
|
|
September 7th, 2012, 01:26 PM | #2167 | |
ninjette.org guru
Name: Malinda
Location: Jonesboro, LA
Join Date: Jul 2012 Motorcycle(s): Ninja 250R Posts: 484
|
Quote:
Yesterday I got my bike back from the shop, they did the 600 mile maint. for me and today I had to clean the crap out of my back tire from all the lube they put on the chain -- it took me at least 20 - 30 min on just the back wheel then I had to wash my hands with dawn and comet to scrub all the lube off my hands so that I could clean the rest. I could not believe that a 25 mile ride could sling so much lube, they must be using some kind of cheap stuff????? |
|
|
September 7th, 2012, 03:58 PM | #2169 |
ninjette.org member
Name: John
Location: Buffalo NY
Join Date: Sep 2009 Motorcycle(s): Ninja Posts: 122
|
Did the GSXR shock and pod filter. The filter is taped off because I don't have my jets yet. And for anyone who has a GSXR shock, an AR15 barrel wrench works great as a preload adjuster. :-)
|
|
September 7th, 2012, 06:54 PM | #2170 |
ninjette.org member
Name: michael
Location: chesapeake va
Join Date: Aug 2012 Motorcycle(s): 2010 ninja 250R SE Posts: 97
|
Sold it to its new owner. 06 Pregen 7,129 miles he got a steal at 1600 cash. I will return next season with maybe the new 2013 or at least a 08+
|
|
September 7th, 2012, 07:10 PM | #2171 |
ninjette.org member
Name: John
Location: dallas
Join Date: Aug 2012 Motorcycle(s): 2007 Ninja 250 Posts: 181
|
Rode it to work.
And back. Like always. :-) |
|
September 8th, 2012, 01:09 PM | #2172 |
time is running out....
Name: jesse
Location: the land of corn
Join Date: Sep 2012 Motorcycle(s): pregen ninjari Posts: 412
Blog Entries: 3
|
i conned my friend into buying a bike...3 minutes later a 95 ninja for $650 pops up on craigslist bought and drove it to him.
anyways heres what i did today. rather interesting (covered rips)
__________________________________________________
The King |
|
September 8th, 2012, 02:26 PM | #2173 |
ninjette.org member
Name: John
Location: dallas
Join Date: Aug 2012 Motorcycle(s): 2007 Ninja 250 Posts: 181
|
New spark plugs. Checked the valve clearence.
__________________________________________________
Shhhhh, don't tell Jiggles I am using the [ you ] tag. |
|
September 8th, 2012, 07:30 PM | #2174 |
time is running out....
Name: jesse
Location: the land of corn
Join Date: Sep 2012 Motorcycle(s): pregen ninjari Posts: 412
Blog Entries: 3
|
so i ditched the mudguard peice along with the bike lock.
from lowes i got the perfect spring. unlock seat from under
__________________________________________________
The King |
|
September 8th, 2012, 07:37 PM | #2175 |
ninjette.org mafioso
Name: Ben
Location: Dillon, MT
Join Date: Jul 2012 Motorcycle(s): 2009 Ninja 250R Posts: 337
|
I got a bit stir crazy in the last day or so.
- cleaned/lubed chain - tried buffing compound on the tank (a few jacket scratches - it worked for the shallow ones, and the deep ones look better) - waxed the tank after the buffing - installed semipermanent SAE connector for battery tender/USB port - converted my OtterBox Defender into a GPS mount. Did you know you can't see black duct tape on the dash of a black Ninja? |
|
September 9th, 2012, 03:16 PM | #2176 |
ninjette.org guru
Name: Malinda
Location: Jonesboro, LA
Join Date: Jul 2012 Motorcycle(s): Ninja 250R Posts: 484
|
Just got back from a wonderful 93 mile ride, beautiful weather
|
|
September 9th, 2012, 06:25 PM | #2177 |
RIP Alex
Name: Cuong
Location: Houston, TX
Join Date: Apr 2011 Motorcycle(s): '10 250r, '09 265r Posts: A lot.
Blog Entries: 2
|
I put on 250+ miles on the bike today on a ride with a few friends. I knew I was pushing my worn front tires a good bit so I laid off the throttle some. After the ride we went back to one of the guys place to chill. While we were there, he offered to give me a used front tire and we installed it there in his garage. 120/70/17 BT-16. Cleaned my chain too afterwards
__________________________________________________
HalfFast Racing Team Serving Greater Houston Area Riders:WFO Riders MotoHouston HPC CMRA Ride Smart Fastline Lone Star Track Days |
|
September 9th, 2012, 06:49 PM | #2178 |
ninjette.org dude
Name: 1 guess :-)
Location: SF Bay Area
Join Date: Jun 2008 Motorcycle(s): '13 Ninja 300 (white, the fastest color!), '13 R1200RT, '14 CRF250L, '12 TT-R125LE Posts: Too much.
Blog Entries: 7
|
__________________________________________________
Montgomery Street Motorcycle Club / cal24.com / crf250l.org / ninjette.org ninjette.org Terms of Service Shopping for motorcycle parts or equipment? Come here first. The friendliest Ninja 250R/300/400 forum on the internet! (especially Unregistered) |
|
September 9th, 2012, 07:26 PM | #2179 |
Jigglin' your Jiglets
Name: Sean
Location: San Jose, Ca
Join Date: Jun 2011 Motorcycle(s): 2009 K1300S, 2013 Ninja 300, 2011 Ninja 250R, Faster than Unregistered's ninjette Posts: Too much.
Blog Entries: 1
MOTM - Apr '13
|
A clock and a gps? That ninjette is pimpin pimpin
__________________________________________________
If the Ninja 250 doesn't have enough power for you, then you don't know how to ride it. AFM #676 Supersports are for n00bs |
|
September 9th, 2012, 09:07 PM | #2180 |
ninjette.org certified postwhore
Name: Wayan
Location: Bali - Indonesia
Join Date: Apr 2009 Motorcycle(s): 2014 Z250 Posts: A lot.
|
bike ride with a buddy yesterday, clocked in about 120 miles, round trip to the north of bali.
eh... the R6 is his, the modded 2fiddy is mine, he he then later in the evening, i got my go pro time to test it out next time!
__________________________________________________
Kawasaki Z250, Bored up to 300cc with 12.8 CR, 41hp at wheel 27nm torque, Two bros full exhaust with DB killer Dynojet Power Commander V, KnN Open filter, intake and exhaust ported, Puig Windshield |
|
September 10th, 2012, 03:32 PM | #2181 |
Lays er down
Name: Michael
Location: Maryland
Join Date: Apr 2012 Motorcycle(s): 2008 Lime green Ninja 250R Posts: A lot.
|
i installed a smoked zero gravity double bubble. and also made a very tiny scratch on my right fairing because i accidentally hit it with a screw driver
|
|
September 10th, 2012, 04:43 PM | #2182 |
One Loyal Fox
Name: Rahul
Location: Mechanicsburg, PA
Join Date: Apr 2012 Motorcycle(s): 2012 Ninja 250R (RIP), 2011 ZX-6R Posts: 869
|
uh oh..abuse! I'm with Bike Protective Services, I'm going to have to take your bike away and put it in a safe new home. My home will be an adequate place for now
__________________________________________________
My riding blog! Check it out if you are bored!aninjaridingpandabear.blogspot.com RIP Alex 8.10.12 |
|
September 10th, 2012, 04:53 PM | #2183 |
Lays er down
Name: Michael
Location: Maryland
Join Date: Apr 2012 Motorcycle(s): 2008 Lime green Ninja 250R Posts: A lot.
|
|
|
September 11th, 2012, 05:22 AM | #2185 |
One Loyal Fox
Name: Rahul
Location: Mechanicsburg, PA
Join Date: Apr 2012 Motorcycle(s): 2012 Ninja 250R (RIP), 2011 ZX-6R Posts: 869
|
hahahaha i'm dying.
__________________________________________________
My riding blog! Check it out if you are bored!aninjaridingpandabear.blogspot.com RIP Alex 8.10.12 |
|
September 11th, 2012, 05:33 PM | #2186 |
ninjette.org certified postwhore
Name: Eric
Location: Nashville, TN
Join Date: Oct 2011 Motorcycle(s): 2009 CBR600rr Posts: A lot.
Blog Entries: 1
|
Not my Ninjette, but felt like sharing anyways:
Had lights installed into my passenger pegs. Wired it up today, here's the result: Turn signal pic: Brake Light pic: Video 1:
Link to original page on YouTube. |
|
September 12th, 2012, 04:21 PM | #2187 |
ninjette.org sage
Name: Benji
Location: Wadsworth, IL
Join Date: Aug 2011 Motorcycle(s): 2009 Ninja 250r (Sold), 2009 FZ6, 2015 Honda Grom Posts: 898
|
Took mine to get dyno tuned, hopefully it'll fix the problems I'v been having with my carbs since I had it jetted.
|
|
September 13th, 2012, 02:28 AM | #2188 |
ninjette.org member
Name: Monica
Location: Fayetteville, AR
Join Date: Jun 2009 Motorcycle(s): 09 Ninja 250R Posts: 23
|
Replaced the battery.
|
|
September 13th, 2012, 02:35 AM | #2189 |
ninjette.org certified postwhore
Name: Hansveer
Location: Bombay, India
Join Date: Jan 2012 Motorcycle(s): Ninja 250r - Track whore, Ninja 300 - SOLD, KTM RC390 - Orange Hulk, Ducati 899 Panigale - Red Devil. Posts: A lot.
|
I have so many new mods coming up I've lost count...
|
|
September 13th, 2012, 07:21 PM | #2190 |
ninjette.org guru
Name: Malinda
Location: Jonesboro, LA
Join Date: Jul 2012 Motorcycle(s): Ninja 250R Posts: 484
|
I finally got to see my odo turn 2000 miles
|
|
September 13th, 2012, 10:13 PM | #2193 |
ninjette.org guru
Name: Marc
Location: Castaic, CA
Join Date: Sep 2011 Motorcycle(s): 1986 Goldwing, 1996 CR500, 2011 Ninja 250, 2009 Harley Heritage Softail, 1941 Suzuki Gerbil 250 Posts: 427
|
Killed a condor based on the way my head snapped back when it hit my helmet..
__________________________________________________
I know there's a 7th gear here somewhere... Changing to 15T/41T, now I'll get that 7th gear, lol. |
|
September 13th, 2012, 10:27 PM | #2194 |
ninjette.org guru
Name: Martin
Location: California
Join Date: Jun 2012 Motorcycle(s): 250r Posts: 291
|
I cleaned/lubed my chain, and completed my first oil/filter change. I took the bike for a ride afterwards and noticed that there is a repetitive squeeling noise when coming to a stop.
|
|
September 14th, 2012, 05:18 AM | #2195 |
ninjette.org certified postwhore
Name: Hansveer
Location: Bombay, India
Join Date: Jan 2012 Motorcycle(s): Ninja 250r - Track whore, Ninja 300 - SOLD, KTM RC390 - Orange Hulk, Ducati 899 Panigale - Red Devil. Posts: A lot.
|
Put racing stripes.
Got a whole bunch of goodies for my bike... And my parents wonder why I'm always broke... And believe me, this is not the last of it... Crank Case breather, A&L Rearset adjusters, Gold valve emulators(ordered a second set, after the ebay one went MIA), DIY pre load adjusters... All on their way... My ninjette's Gonna be PIMPIN it big time... |
|
September 15th, 2012, 09:08 AM | #2196 |
ninjette.org member
Name: Tim
Location: Quad Cities
Join Date: Sep 2012 Motorcycle(s): Ninja 250 Posts: 102
|
Yesterday helped Rabies cut and reweld the back end of his 250. I cut a piece of a bicycle seat post (5/8" tubing) and notched it to reinforce the upper portion of the back of the frame, and welded it in. The rear lower bar was cut, bent upwards, notched and welded to the rear upper bar of the frame, and the back 6" was cut partway, and bent upwards and welded so it was straight. Everything was done with a hacksaw, 3" cutoff wheel and just eyeballing it.
I'm waiting on a new frame for my 250 so I can transfer parts to it so I can license and title it and start riding so I can get my license. Currently I only have a permit. |
|
September 15th, 2012, 09:12 AM | #2197 |
YMCMBillionaire
Name: Kyle
Location: Tulsa, OK
Join Date: Jul 2012 Motorcycle(s): 2008 Ninja 250R(Wrecked&Gone), 2004 Honda CBR1000RR (Trading back to dealer for 600cc) Posts: 81
|
Today removed the exhaust and cleaned the engine casing and such that had stuff on it etc cleaned it everywhere spent about 3 hours. Now waiting for my MGP Growler exhaust to get here and my HID light kit andddd my color accent pieces. (;
__________________________________________________
|
|
September 15th, 2012, 07:06 PM | #2199 |
ninjette.org member
Name: John
Location: dallas
Join Date: Aug 2012 Motorcycle(s): 2007 Ninja 250 Posts: 181
|
Pulled the carbs, cleaned the parts I could get to without stripping screws. Did the airbox mod. Will try to put them on and Sync tomorrow.
__________________________________________________
Shhhhh, don't tell Jiggles I am using the [ you ] tag. |
|
September 15th, 2012, 07:08 PM | #2200 |
RIP Alex
Name: Cuong
Location: Houston, TX
Join Date: Apr 2011 Motorcycle(s): '10 250r, '09 265r Posts: A lot.
Blog Entries: 2
|
That's Tim said lol.
I wired in new front turn signals and swapped out to an electronic flasher. I highly recommend everyone who hasn't done so do it. Why they should is because whenever a bulb goes out, the other bulb will still continue to blink. I am using Tridon EL-12 flasher. I also installed my left side X-race rearset finally. I'll write a review/install sometime later.
__________________________________________________
HalfFast Racing Team Serving Greater Houston Area Riders:WFO Riders MotoHouston HPC CMRA Ride Smart Fastline Lone Star Track Days |
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Discovered something scary about my Ninjette today... | kjohng | General Motorcycling Discussion | 28 | October 15th, 2021 01:40 PM |
Sold the 2006 Ninjette today :( | Renner | General Motorcycling Discussion | 31 | October 16th, 2014 11:46 PM |
Today I Gave My Ninjette Wings! | BlueHairSar | Pictures | 5 | June 20th, 2013 07:38 AM |
my bro went down today on his ninjette | richierich781 | !%@*#$%!)@#&!%@ I crashed! | 46 | January 18th, 2013 11:59 AM |
Ninjette. org hacked today | CC Cowboy | Off-Topic | 9 | April 3rd, 2011 08:55 AM |
|
|