May 10th, 2014, 12:23 PM | #1 |
ninjette.org certified postwhore
Name: Rebecca
Location: SF Bay Area
Join Date: Sep 2009 Motorcycle(s): 2013 Ninja 300 w/ ABS, 2014 NC700X, 2008 Ninja 250 (sold), 2002 Ninja 250 (sold) Posts: A lot.
MOTM - Jan '18, Sep '13
|
Ninja 300 Parts For Sale
Selling off some OEM stuff that I don't intend to use again since they've been replaced with aftermarket parts. Local pickup only with the exception of the lower fairing piece and the kickstand.
- Green, left-side, lower fairing. Has some typical wear on the front from riding, but otherwise undamaged. $75 shipped. Will give local pickup discount. - Exhaust heat shield. Has a small scuff. $30 - Chain guard/rear hugger. Clean and in great condition. $30 - Windcreen. In good condition. $35 - L/R passenger pegs. $40 each or $75 for both. - Left rearset. No shifter or tie rod. $40 SOLD - Kickstand. It has been cut for a lowered bike. $25 shipped. Will give local pickup discount. All prices are OBO. Last futzed with by tfkrocks; June 28th, 2014 at 11:22 AM. |
|
May 15th, 2014, 12:34 PM | #2 |
ninjette.org certified postwhore
Name: Rebecca
Location: SF Bay Area
Join Date: Sep 2009 Motorcycle(s): 2013 Ninja 300 w/ ABS, 2014 NC700X, 2008 Ninja 250 (sold), 2002 Ninja 250 (sold) Posts: A lot.
MOTM - Jan '18, Sep '13
|
Added parts for sale
@Alex Can you change the title so it says "parts" instead of "fairing?" |
|
May 15th, 2014, 12:45 PM | #3 |
ninjette.org dude
Name: 1 guess :-)
Location: SF Bay Area
Join Date: Jun 2008 Motorcycle(s): '13 Ninja 300 (white, the fastest color!), '13 R1200RT, '14 CRF250L, '12 TT-R125LE Posts: Too much.
Blog Entries: 7
|
__________________________________________________
Montgomery Street Motorcycle Club / cal24.com / crf250l.org / ninjette.org ninjette.org Terms of Service Shopping for motorcycle parts or equipment? Come here first. The friendliest Ninja 250R/300/400 forum on the internet! (especially Unregistered) |
|
May 15th, 2014, 11:17 PM | #4 |
ninjette.org certified postwhore
Name: Inderveer
Location: San Jose
Join Date: Nov 2012 Motorcycle(s): '07 ex250-F/J Posts: A lot.
|
I might get this if it is compatible with the newgen rear..lemme check. Regardless, good luck! I need to start selling off my recently replaced parts as well.
|
|
May 15th, 2014, 11:41 PM | #5 |
ninjette.org certified postwhore
Name: Rebecca
Location: SF Bay Area
Join Date: Sep 2009 Motorcycle(s): 2013 Ninja 300 w/ ABS, 2014 NC700X, 2008 Ninja 250 (sold), 2002 Ninja 250 (sold) Posts: A lot.
MOTM - Jan '18, Sep '13
|
According to a thread in the 300 section, it will fit. The chain guard mounting points are the same. You just won't be able to use some of the bolting spots on the chain guard since the newgen swingarm doesn't have those mounting points unless you modify it. You're welcome to come bolt it on to see if you like it.
|
|
May 16th, 2014, 12:05 AM | #6 | |
ninjette.org certified postwhore
Name: Inderveer
Location: San Jose
Join Date: Nov 2012 Motorcycle(s): '07 ex250-F/J Posts: A lot.
|
Quote:
Thanks |
|
|
May 22nd, 2014, 01:44 AM | #7 |
ninjette.org certified postwhore
Name: Rebecca
Location: SF Bay Area
Join Date: Sep 2009 Motorcycle(s): 2013 Ninja 300 w/ ABS, 2014 NC700X, 2008 Ninja 250 (sold), 2002 Ninja 250 (sold) Posts: A lot.
MOTM - Jan '18, Sep '13
|
Added parts
|
|
May 22nd, 2014, 08:43 AM | #8 |
yes, I'm famous.
Name: matt
Location: Norfolk, VA
Join Date: Nov 2012 Motorcycle(s): 2009 Ninjette 250R Posts: 80
|
if i didn't just buy a cbr hugger last night, i would have gotten this, damn! i checked the f.s. threads too late
noooooooo
__________________________________________________
I cant wheelie and that makes me sad. |
|
May 29th, 2014, 01:31 AM | #10 |
ninjette.org certified postwhore
Name: Rebecca
Location: SF Bay Area
Join Date: Sep 2009 Motorcycle(s): 2013 Ninja 300 w/ ABS, 2014 NC700X, 2008 Ninja 250 (sold), 2002 Ninja 250 (sold) Posts: A lot.
MOTM - Jan '18, Sep '13
|
|
|
June 27th, 2014, 01:07 PM | #11 |
ninjette.org newbie
Name: Kyle
Location: Fremont, CA
Join Date: Jun 2014 Motorcycle(s): Ninja 300 ABS Posts: 6
|
Hello, I know this post is over a month old but would you happen to still have this Left rearset? I'm located in SF Bay Area and can meet up! PM me if you still have it, it's alright if you didn't, I will continue searching.
Thank you!! |
|
June 28th, 2014, 11:22 AM | #12 |
ninjette.org certified postwhore
Name: Rebecca
Location: SF Bay Area
Join Date: Sep 2009 Motorcycle(s): 2013 Ninja 300 w/ ABS, 2014 NC700X, 2008 Ninja 250 (sold), 2002 Ninja 250 (sold) Posts: A lot.
MOTM - Jan '18, Sep '13
|
Left rearset sold
|
|
July 1st, 2014, 04:52 AM | #13 |
Certified Troublemaker
Name: Teri
Location: Hamilton, NJ
Join Date: Oct 2012 Motorcycle(s): 2006 Ninja 250r "Pikachu", 2017 Ninja 650 "Epona" Posts: A lot.
MOTM - Aug '13, Aug '14, Feb '17
|
May be interested in the kickstand. how low was the bike it was cut for?
__________________________________________________
Raven's Rejuvenation A bruise is a lesson... and each lesson makes us better... |
|
July 1st, 2014, 09:24 AM | #14 |
ninjette.org certified postwhore
Name: Rebecca
Location: SF Bay Area
Join Date: Sep 2009 Motorcycle(s): 2013 Ninja 300 w/ ABS, 2014 NC700X, 2008 Ninja 250 (sold), 2002 Ninja 250 (sold) Posts: A lot.
MOTM - Jan '18, Sep '13
|
|
|
July 1st, 2014, 09:37 AM | #15 |
Certified Troublemaker
Name: Teri
Location: Hamilton, NJ
Join Date: Oct 2012 Motorcycle(s): 2006 Ninja 250r "Pikachu", 2017 Ninja 650 "Epona" Posts: A lot.
MOTM - Aug '13, Aug '14, Feb '17
|
Ok, mine is at what i think is 1" (mid hole on the roaring toyz links).
Sounds like that may be good for me then. Just got to wait for payday on friday.
__________________________________________________
Raven's Rejuvenation A bruise is a lesson... and each lesson makes us better... |
|
July 14th, 2014, 09:49 AM | #16 |
Biker Noob
Name: Richard
Location: Durham, North Carolina
Join Date: Apr 2014 Motorcycle(s): 2004 Honda Shadow 750 Aero Posts: 176
|
If this will fit the 12 ninja 250 I am game for that price.
__________________________________________________
Riding as I stole it. |
|
July 14th, 2014, 10:05 AM | #17 |
ninjette.org certified postwhore
Name: Rebecca
Location: SF Bay Area
Join Date: Sep 2009 Motorcycle(s): 2013 Ninja 300 w/ ABS, 2014 NC700X, 2008 Ninja 250 (sold), 2002 Ninja 250 (sold) Posts: A lot.
MOTM - Jan '18, Sep '13
|
|
|
July 14th, 2014, 10:06 AM | #18 |
ninjette.org certified postwhore
Name: Rebecca
Location: SF Bay Area
Join Date: Sep 2009 Motorcycle(s): 2013 Ninja 300 w/ ABS, 2014 NC700X, 2008 Ninja 250 (sold), 2002 Ninja 250 (sold) Posts: A lot.
MOTM - Jan '18, Sep '13
|
Oh forgot to post that the kickstand has been sold.
|
|
July 21st, 2014, 06:33 AM | #19 |
sammich maker
Name: snot
Location: West Ohio - in the kitchen
Join Date: Feb 2012 Motorcycle(s): 2013 white 300, 09 KLX 250 SF, 09 thunder blue 250(traded) Posts: A lot.
MOTM - Apr '15
|
Edit for pm
|
|
July 24th, 2014, 11:33 PM | #20 |
ninjette.org certified postwhore
Name: Inderveer
Location: San Jose
Join Date: Nov 2012 Motorcycle(s): '07 ex250-F/J Posts: A lot.
|
Lemme know when you're available next week after Tuesday!!!!!!!!!! I'll try to come then..if you still have it, that is lol.
|
|
July 30th, 2014, 03:49 PM | #21 |
ninjette.org certified postwhore
Name: Rebecca
Location: SF Bay Area
Join Date: Sep 2009 Motorcycle(s): 2013 Ninja 300 w/ ABS, 2014 NC700X, 2008 Ninja 250 (sold), 2002 Ninja 250 (sold) Posts: A lot.
MOTM - Jan '18, Sep '13
|
Rear hugger sold.
|
|
July 30th, 2014, 04:24 PM | #22 |
ninjette.org certified postwhore
Name: Inderveer
Location: San Jose
Join Date: Nov 2012 Motorcycle(s): '07 ex250-F/J Posts: A lot.
|
|
|
July 30th, 2014, 08:06 PM | #23 |
Certifiable nontundrum
Name: Harper
Location: NC Milkshake stand
Join Date: Mar 2013 Motorcycle(s): 2013 SE NINJA 300 Posts: Too much.
MOTM - Sep '13, Sep '16
|
I should really post up an sell all these stock bits I have laying around
|
|
August 15th, 2014, 10:39 AM | #24 |
ninjette.org certified postwhore
Name: Rebecca
Location: SF Bay Area
Join Date: Sep 2009 Motorcycle(s): 2013 Ninja 300 w/ ABS, 2014 NC700X, 2008 Ninja 250 (sold), 2002 Ninja 250 (sold) Posts: A lot.
MOTM - Jan '18, Sep '13
|
Heat shield sold.
|
|
December 14th, 2014, 12:54 PM | #25 |
ninjette.org certified postwhore
Name: Rebecca
Location: SF Bay Area
Join Date: Sep 2009 Motorcycle(s): 2013 Ninja 300 w/ ABS, 2014 NC700X, 2008 Ninja 250 (sold), 2002 Ninja 250 (sold) Posts: A lot.
MOTM - Jan '18, Sep '13
|
Bump. I'm currently available to deal with this stuff again.
__________________________________________________
My Ninja 300 |
|
September 24th, 2016, 12:20 PM | #26 |
ninjette.org certified postwhore
Name: Rebecca
Location: SF Bay Area
Join Date: Sep 2009 Motorcycle(s): 2013 Ninja 300 w/ ABS, 2014 NC700X, 2008 Ninja 250 (sold), 2002 Ninja 250 (sold) Posts: A lot.
MOTM - Jan '18, Sep '13
|
Bump. Time to start trying to sell my stuff again. Still have the lower left fairing, windscreen, and passenger pegs.
Adding a white center tail fairing piece. It's the pearl white OEM color. All tabs intact. $25 shipped OBO. $20 local pickup.
__________________________________________________
My Ninja 300 |
|
October 12th, 2016, 01:24 PM | #27 |
ninjette.org certified postwhore
Name: Rebecca
Location: SF Bay Area
Join Date: Sep 2009 Motorcycle(s): 2013 Ninja 300 w/ ABS, 2014 NC700X, 2008 Ninja 250 (sold), 2002 Ninja 250 (sold) Posts: A lot.
MOTM - Jan '18, Sep '13
|
Up
__________________________________________________
My Ninja 300 |
|
October 16th, 2016, 07:13 AM | #28 |
ninjette.org certified postwhore
Name: Rebecca
Location: SF Bay Area
Join Date: Sep 2009 Motorcycle(s): 2013 Ninja 300 w/ ABS, 2014 NC700X, 2008 Ninja 250 (sold), 2002 Ninja 250 (sold) Posts: A lot.
MOTM - Jan '18, Sep '13
|
Lower left fairing sold
__________________________________________________
My Ninja 300 |
|
October 16th, 2016, 02:30 PM | #29 |
Certifiable nontundrum
Name: Harper
Location: NC Milkshake stand
Join Date: Mar 2013 Motorcycle(s): 2013 SE NINJA 300 Posts: Too much.
MOTM - Sep '13, Sep '16
|
__________________________________________________
|
|
October 16th, 2016, 02:36 PM | #30 |
ninjette.org certified postwhore
Name: Rebecca
Location: SF Bay Area
Join Date: Sep 2009 Motorcycle(s): 2013 Ninja 300 w/ ABS, 2014 NC700X, 2008 Ninja 250 (sold), 2002 Ninja 250 (sold) Posts: A lot.
MOTM - Jan '18, Sep '13
|
__________________________________________________
My Ninja 300 |
|
October 17th, 2016, 11:09 AM | #31 |
Certifiable nontundrum
Name: Harper
Location: NC Milkshake stand
Join Date: Mar 2013 Motorcycle(s): 2013 SE NINJA 300 Posts: Too much.
MOTM - Sep '13, Sep '16
|
__________________________________________________
|
|
October 17th, 2016, 11:58 AM | #32 |
ninjette.org certified postwhore
Name: Rebecca
Location: SF Bay Area
Join Date: Sep 2009 Motorcycle(s): 2013 Ninja 300 w/ ABS, 2014 NC700X, 2008 Ninja 250 (sold), 2002 Ninja 250 (sold) Posts: A lot.
MOTM - Jan '18, Sep '13
|
Oh were they supposed to just be question marks? lol
__________________________________________________
My Ninja 300 |
|
October 17th, 2016, 06:20 PM | #33 |
Certifiable nontundrum
Name: Harper
Location: NC Milkshake stand
Join Date: Mar 2013 Motorcycle(s): 2013 SE NINJA 300 Posts: Too much.
MOTM - Sep '13, Sep '16
|
No... They show sometimes, sometimes they don't
__________________________________________________
|
|
October 17th, 2016, 09:32 PM | #34 |
ninjette.org certified postwhore
Name: Rebecca
Location: SF Bay Area
Join Date: Sep 2009 Motorcycle(s): 2013 Ninja 300 w/ ABS, 2014 NC700X, 2008 Ninja 250 (sold), 2002 Ninja 250 (sold) Posts: A lot.
MOTM - Jan '18, Sep '13
|
Ah well that is why I got confused lol
__________________________________________________
My Ninja 300 |
|
October 19th, 2016, 04:26 AM | #35 |
Certifiable nontundrum
Name: Harper
Location: NC Milkshake stand
Join Date: Mar 2013 Motorcycle(s): 2013 SE NINJA 300 Posts: Too much.
MOTM - Sep '13, Sep '16
|
Welcome to my world... I stay confused
__________________________________________________
|
1 out of 1 members found this post helpful. |
October 24th, 2016, 02:38 PM | #36 |
ninjette.org certified postwhore
Name: Rebecca
Location: SF Bay Area
Join Date: Sep 2009 Motorcycle(s): 2013 Ninja 300 w/ ABS, 2014 NC700X, 2008 Ninja 250 (sold), 2002 Ninja 250 (sold) Posts: A lot.
MOTM - Jan '18, Sep '13
|
Oops I forgot that this thread is really old and that I should have rechecked prices. Updated prices:
- Windcreen. $25 - L/R passenger pegs. $30 each or $55 for both.
__________________________________________________
My Ninja 300 |
|
December 14th, 2016, 02:25 AM | #37 |
ninjette.org certified postwhore
Name: Rebecca
Location: SF Bay Area
Join Date: Sep 2009 Motorcycle(s): 2013 Ninja 300 w/ ABS, 2014 NC700X, 2008 Ninja 250 (sold), 2002 Ninja 250 (sold) Posts: A lot.
MOTM - Jan '18, Sep '13
|
Windscreen sold
__________________________________________________
My Ninja 300 |
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
PARTS NINJAS FIRST NINJA 300 PART OUT! Full 2013 Ninja 300 in good shape! NEED PARTS? | PartsNinja | Motorcycle-related | 75 | October 23rd, 2016 04:08 PM |
2013 Ninja 300 For Sale with Tons of Go Fast Parts | Surferboy120 | Motorcycle-related | 33 | October 6th, 2014 08:05 PM |
Lots of 300 and newgen parts for sale! | LittleRedNinjette | Motorcycle-related | 21 | September 22nd, 2014 01:20 PM |
Stock 300 parts for sale. | ninjamunky85 | Motorcycle-related | 6 | August 23rd, 2013 04:40 PM |
2009 Ninja parts - all street parts for sale | krunkfoo | Motorcycle-related | 52 | July 26th, 2013 07:55 PM |
|
|